Peugeot 806 MOT Results

Registered in 1997
45.5% pass rate
from 66 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Peugeot 806 is unusually good or bad.

  • 21% fail on Body, chassis, structure (93% worse than other 1997 cars)
    • 11% fail on Exhaust system (190% worse than other 1997 cars)
    • 9.1% fail on Transmission
      • 9.1% fail on Drive shafts (2 times worse than other 1997 cars)
        • 9.1% fail on Joints (2 times worse than other 1997 cars)
    • 4.5% fail on Doors (7 times worse than other 1997 cars)
      • 4.5% fail on Other passenger's door (24 times worse than other 1997 cars)
        • 4.5% fail on Door condition (25 times worse than other 1997 cars)
    • 1.5% fail on Spare wheel
      • 1.5% fail on Spare wheel condition
      • 1.5% fail on Carrier
    • 1.5% fail on Body
      • 1.5% fail on Other body component
  • 17% fail on Lamps, reflectors and electrical equipment
    • 6.1% fail on Headlamp aim
      • 6.1% fail on Headlamp aim
    • 4.5% fail on Stop lamp
    • 3.0% fail on Direction indicators
      • 3.0% fail on Flashing type
        • 3.0% fail on Individual direction indicators
    • 3.0% fail on Registration plate lamp(s)
    • 1.5% fail on Headlamps
      • 1.5% fail on Headlamp
    • 1.5% fail on Electrical equipment
      • 1.5% fail on Horn
  • 17% fail on Suspension
    • 9.1% fail on Suspension arms
      • 6.1% fail on Ball joint
      • 1.5% fail on Suspension arm
      • 1.5% fail on Pins and bushes
    • 6.1% fail on Component mounting prescribed areas
    • 3.0% fail on Springs
      • 3.0% fail on Coil springs
        • 3.0% fail on Coil spring
    • 3.0% fail on Shock absorbers
    • 1.5% fail on Wheel bearings
    • 1.5% fail on Sub-frames
      • 1.5% fail on Sub-frame
    • 1.5% fail on Other suspension component
      • 1.5% fail on Ball joint
  • 15% fail on Brakes
    • 7.6% fail on Brake performance
      • 7.6% fail on Service brake performance
        • 6.1% fail on Rbt
          • 4.5% fail on Service brake performance
          • 1.5% fail on Service brake imbalance
        • 1.5% fail on Plate brake tester
          • 1.5% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 3.0% fail on Service Brake Efficiency (sp)
        • 3.0% fail on Rbt (sp)
          • 3.0% fail on Service brake imbalance
          • 1.5% fail on Service brake performance
      • 1.5% fail on Brake performance not tested
    • 4.5% fail on Rigid brake pipes
    • 4.5% fail on Mechanical brake components
      • 4.5% fail on Brake discs and drums (4 times worse than other 1997 cars)
        • 4.5% fail on Brake discs (5 times worse than other 1997 cars)
    • 1.5% fail on Parking brake control
      • 1.5% fail on Lever
    • 1.5% fail on Hydraulic systems
      • 1.5% fail on Reservoirs
  • 11% fail on Noise, emissions and leaks
    • 7.6% fail on Exhaust emissions
      • 6.1% fail on Compression ignition (6 times worse than other 1997 cars)
        • 3.0% fail on Pre 01/07/2008 Non turbo (21 times worse than other 1997 cars)
        • 1.5% fail on Pre 01/07/2008 Turbo
        • 1.5% fail on Emissions not tested
      • 3.0% fail on Spark ignition
        • 3.0% fail on Catalyst emissions
    • 3.0% fail on Fluid leaks
      • 3.0% fail on Engine oil leaks
  • 9.1% fail on Visibility
    • 6.1% fail on Wipers
    • 3.0% fail on View to rear (8 times worse than other 1997 cars)
      • 3.0% fail on Mirrors (9 times worse than other 1997 cars)
    • 1.5% fail on Washers
  • 7.6% fail on Tyres
    • 6.1% fail on Tread depth
    • 1.5% fail on Size/type
    • 1.5% fail on Condition
  • 4.5% fail on Steering
    • 4.5% fail on Steering linkage components
      • 4.5% fail on Track rod end
  • 3.0% fail on Seat belts and supplementary restraint systems
    • 3.0% fail on Seat belts
      • 1.5% fail on Requirements
      • 1.5% fail on Condition

Search Good Garages