Honda Prelude MOT Results

Registered in 1992
66.7% pass rate
from 84 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Honda Prelude is unusually good or bad.

  • 12% fail on Body, chassis, structure
    • 4.8% fail on Transmission
      • 3.6% fail on Drive shafts
        • 3.6% fail on Joints
      • 1.2% fail on Prop shafts
        • 1.2% fail on Joints
    • 3.6% fail on Exhaust system
    • 1.2% fail on Integral vehicle structure
      • 1.2% fail on Integral vehicle structure condition
    • 1.2% fail on Chassis
      • 1.2% fail on Chassis condition
    • 1.2% fail on Body
      • 1.2% fail on Panel
  • 11% fail on Noise, emissions and leaks
    • 9.5% fail on Exhaust emissions
      • 9.5% fail on Spark ignition
        • 8.3% fail on Catalyst emissions
        • 1.2% fail on Non catalyst emissions
        • 1.2% fail on Malfunction indicator lamp
        • 1.2% fail on Emissions not tested
      • 1.2% fail on Compression ignition
        • 1.2% fail on Pre 01/07/2008 Non turbo
    • 2.4% fail on Fluid leaks
      • 2.4% fail on Engine oil leaks
  • 9.5% fail on Brakes
    • 7.1% fail on Brake performance
      • 6.0% fail on Service Brake Efficiency (sp)
        • 6.0% fail on Rbt (sp)
          • 3.6% fail on Service brake imbalance
          • 2.4% fail on Service brake performance
      • 3.6% fail on Parking brake efficiency (sp)
        • 3.6% fail on Rbt (sp)
      • 1.2% fail on Service brake performance
        • 1.2% fail on Rbt
          • 1.2% fail on Service brake performance
    • 3.6% fail on Mechanical brake components
      • 2.4% fail on Brake linings and pads
        • 2.4% fail on Brake pads
      • 1.2% fail on Brake discs and drums
        • 1.2% fail on Brake discs
      • 1.2% fail on Brake cables, rods, levers and linkages
        • 1.2% fail on Lever
    • 1.2% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.2% fail on Hydraulic brake callipers
    • 1.2% fail on ABS / EBS / ESC
      • 1.2% fail on Anti-lock braking system
  • 8.3% fail on Suspension
    • 4.8% fail on Suspension arms
      • 3.6% fail on Ball joint dust cover (4 times worse than other 1992 cars)
      • 1.2% fail on Pins and bushes
      • 1.2% fail on Ball joint
    • 3.6% fail on Component mounting prescribed areas
    • 1.2% fail on Shock absorbers
    • 1.2% fail on Other suspension component
      • 1.2% fail on Ball joint
  • 7.1% fail on Visibility
    • 3.6% fail on Wipers
    • 2.4% fail on Washers
    • 1.2% fail on Condition of glass
      • 1.2% fail on Windscreen
  • 7.1% fail on Lamps, reflectors and electrical equipment
    • 2.4% fail on Headlamps
      • 2.4% fail on Headlamp
    • 2.4% fail on Electrical equipment
      • 2.4% fail on Horn
    • 1.2% fail on Headlamp aim
      • 1.2% fail on Headlamp aim
    • 1.2% fail on Stop lamp
    • 1.2% fail on Direction indicators
      • 1.2% fail on Flashing type
        • 1.2% fail on All direction indicators
    • 1.2% fail on Front and rear fog lamps
      • 1.2% fail on Rear fog lamp
        • 1.2% fail on Rear fog lamp
    • 1.2% fail on Registration plate lamp(s)
  • 4.8% fail on Steering
    • 2.4% fail on Steering gear
      • 2.4% fail on Steering rack
    • 1.2% fail on Power steering
      • 1.2% fail on Pipes and hoses
    • 1.2% fail on Steering wheel
  • 2.4% fail on Tyres
    • 1.2% fail on Condition
    • 1.2% fail on Tread depth
  • 1.2% fail on Seat belts and supplementary restraint systems
    • 1.2% fail on Seat belts
      • 1.2% fail on Prescribed areas

Search Good Garages