Audi 80 MOT Results
Registered in 199159.2% pass rate
from 49 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 cars and highlighted areas where the Audi 80 is unusually good or bad.
-
24% fail on
Lamps, reflectors and electrical equipment
-
10% fail on
Headlamp aim
- 10% fail on Headlamp aim
-
6.1% fail on
Headlamps
- 6.1% fail on Headlamp
- 6.1% fail on Registration plate lamp(s)
-
4.1% fail on
Direction indicators
-
4.1% fail on
Flashing type
- 2.0% fail on All direction indicators
- 2.0% fail on Individual direction indicators
-
4.1% fail on
Flashing type
-
4.1% fail on
Front and rear fog lamps
-
4.1% fail on
Rear fog lamp
- 4.1% fail on Rear fog lamp
-
4.1% fail on
Rear fog lamp
-
4.1% fail on
Electrical equipment
- 4.1% fail on Horn
- 2.0% fail on Stop lamp
-
10% fail on
Headlamp aim
-
20% fail on
Brakes
-
20% fail on
Brake performance
(160% worse than other 1991 cars)
-
12% fail on
Service brake performance
(2 times worse than other 1991 cars)
-
10% fail on
Rbt
(2 times worse than other 1991 cars)
- 10% fail on Service brake performance (2 times worse than other 1991 cars)
- 2.0% fail on Service brake imbalance
-
2.0% fail on
Decelerometer
- 2.0% fail on Service brake performance (Trikes, quads and pre-68 vehicles)
-
10% fail on
Rbt
(2 times worse than other 1991 cars)
-
6.1% fail on
Service Brake Efficiency (sp)
-
6.1% fail on
Rbt (sp)
- 6.1% fail on Service brake imbalance
- 2.0% fail on Service brake performance
-
6.1% fail on
Rbt (sp)
-
4.1% fail on
Parking brake efficiency (sp)
- 4.1% fail on Rbt (sp)
-
2.0% fail on
Parking brake performance
-
2.0% fail on
Rbt
- 2.0% fail on Parking brake performance
-
2.0% fail on
Rbt
-
12% fail on
Service brake performance
(2 times worse than other 1991 cars)
- 2.0% fail on Load sensing valves
-
2.0% fail on
Mechanical brake components
-
2.0% fail on
Brake linings and pads
- 2.0% fail on Brake pads
-
2.0% fail on
Brake linings and pads
-
20% fail on
Brake performance
(160% worse than other 1991 cars)
-
16% fail on
Suspension
-
10% fail on
Anti-roll bars
(8 times worse than other 1991 cars)
- 4.1% fail on Ball joint (106 times worse than other 1991 cars)
- 4.1% fail on Linkage ball joint dust cover (25 times worse than other 1991 cars)
- 2.0% fail on Linkage ball joints
- 8.2% fail on Wheel bearings (4 times worse than other 1991 cars)
-
2.0% fail on
Suspension arms
- 2.0% fail on Pins and bushes
-
2.0% fail on
Other suspension component
- 2.0% fail on Ball joint
-
10% fail on
Anti-roll bars
(8 times worse than other 1991 cars)
-
14% fail on
Body, chassis, structure
- 6.1% fail on Exhaust system
-
6.1% fail on
Transmission
-
6.1% fail on
Drive shafts
- 6.1% fail on Joints
-
6.1% fail on
Drive shafts
-
2.0% fail on
Doors
-
2.0% fail on
Driver's door
- 2.0% fail on Door condition
-
2.0% fail on
Driver's door
-
10% fail on
Steering
-
8.2% fail on
Steering linkage components
(3 times worse than other 1991 cars)
- 8.2% fail on Track rod end (5 times worse than other 1991 cars)
-
2.0% fail on
Steering gear
- 2.0% fail on Steering rack
-
8.2% fail on
Steering linkage components
(3 times worse than other 1991 cars)
-
8.2% fail on
Visibility
- 6.1% fail on Washers
- 2.0% fail on Wipers
-
4.1% fail on
Tyres
- 4.1% fail on Condition
-
2.0% fail on
Identification of the vehicle
- 2.0% fail on Registration plates
-
2.0% fail on
Seat belts and supplementary restraint systems
-
2.0% fail on
Seat belts
- 2.0% fail on Requirements
-
2.0% fail on
Seat belts
-
2.0% fail on
Noise, emissions and leaks
-
2.0% fail on
Exhaust emissions
-
2.0% fail on
Spark ignition
- 2.0% fail on Catalyst emissions
-
2.0% fail on
Spark ignition
-
2.0% fail on
Exhaust emissions