Subaru Outback MOT Results

Registered in 2003
64.1% pass rate
from 39 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2003 cars and highlighted areas where the Subaru Outback is unusually good or bad.

  • 15% fail on Suspension
    • 10% fail on Sub-frames (17 times worse than other 2003 cars)
      • 5.1% fail on Sub-frame (19 times worse than other 2003 cars)
      • 5.1% fail on Sub-frame mounting prescribed areas (21 times worse than other 2003 cars)
    • 7.7% fail on Wheel bearings (4 times worse than other 2003 cars)
    • 5.1% fail on Suspension arms
      • 5.1% fail on Ball joint
    • 5.1% fail on Anti-roll bars
      • 2.6% fail on Anti-roll bar
      • 2.6% fail on Linkage ball joints
  • 15% fail on Body, chassis, structure
    • 5.1% fail on Integral vehicle structure
      • 5.1% fail on Integral vehicle structure condition (4 times worse than other 2003 cars)
    • 5.1% fail on Exhaust system
    • 5.1% fail on Transmission
      • 2.6% fail on Drive shafts
        • 2.6% fail on Joints
      • 2.6% fail on Prop shafts
        • 2.6% fail on Joints
    • 2.6% fail on Chassis
      • 2.6% fail on Chassis condition
    • 2.6% fail on Towbar
      • 2.6% fail on Coupling
  • 10% fail on Lamps, reflectors and electrical equipment
    • 5.1% fail on Headlamps
      • 2.6% fail on Headlamp
      • 2.6% fail on Headlamp levelling device
    • 5.1% fail on Stop lamp
  • 5.1% fail on Brakes
    • 2.6% fail on Rigid brake pipes
    • 2.6% fail on ABS / EBS / ESC
      • 2.6% fail on Anti-lock braking system
  • 2.6% fail on Steering
    • 2.6% fail on Steering linkage components
      • 2.6% fail on Track rod end
  • 2.6% fail on Visibility
    • 2.6% fail on Wipers
  • 2.6% fail on Noise, emissions and leaks
    • 2.6% fail on Exhaust emissions
      • 2.6% fail on Compression ignition
        • 2.6% fail on Pre 01/07/2008 Turbo

Search Good Garages