Proton GEN-2 MOT Results
Registered in 200447.6% pass rate
from 21 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2004 cars and highlighted areas where the Proton GEN-2 is unusually good or bad.
-
29% fail on
Suspension
-
19% fail on
Anti-roll bars
(2 times worse than other 2004 cars)
- 9.5% fail on Linkage ball joint dust cover (5 times worse than other 2004 cars)
- 4.8% fail on Anti-roll bar
- 4.8% fail on Linkage
- 4.8% fail on Ball joint dust cover
- 9.5% fail on Component mounting prescribed areas
- 4.8% fail on Wheel bearings
-
4.8% fail on
Sub-frames
- 4.8% fail on Sub-frame mounting prescribed areas
-
4.8% fail on
Other suspension component
- 4.8% fail on Ball joint dust cover
-
19% fail on
Anti-roll bars
(2 times worse than other 2004 cars)
-
24% fail on
Brakes
- 14% fail on Rigid brake pipes
-
14% fail on
Brake performance
- 4.8% fail on Brake performance not tested
-
4.8% fail on
Service Brake Efficiency (sp)
-
4.8% fail on
Rbt (sp)
- 4.8% fail on Service brake imbalance
-
4.8% fail on
Rbt (sp)
-
4.8% fail on
Parking brake efficiency (sp)
- 4.8% fail on Rbt (sp)
-
4.8% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 4.8% fail on Hydraulic brake callipers
-
19% fail on
Lamps, reflectors and electrical equipment
-
9.5% fail on
Headlamps
- 4.8% fail on Headlamp
- 4.8% fail on Headlamp levelling device
-
4.8% fail on
Direction indicators
-
4.8% fail on
Flashing type
- 4.8% fail on Side repeaters
-
4.8% fail on
Flashing type
-
4.8% fail on
Front and rear fog lamps
-
4.8% fail on
Rear fog lamp
- 4.8% fail on Rear fog lamp
-
4.8% fail on
Rear fog lamp
-
9.5% fail on
Headlamps
-
14% fail on
Body, chassis, structure
-
4.8% fail on
Integral vehicle structure
-
4.8% fail on
Sub-frame
- 4.8% fail on Sub-frame condition
-
4.8% fail on
Sub-frame
-
4.8% fail on
Transmission
-
4.8% fail on
Drive shafts
- 4.8% fail on Joints
-
4.8% fail on
Drive shafts
-
4.8% fail on
Engine mounting
- 4.8% fail on Engine mounting condition
-
4.8% fail on
Doors
-
4.8% fail on
Driver's door
- 4.8% fail on Door condition
-
4.8% fail on
Driver's door
-
4.8% fail on
Integral vehicle structure
-
9.5% fail on
Visibility
- 4.8% fail on Wipers
- 4.8% fail on Washers
-
4.8% fail on
Seat belts and supplementary restraint systems
-
4.8% fail on
Seat belts
- 4.8% fail on Condition
-
4.8% fail on
Seat belts
-
4.8% fail on
Noise, emissions and leaks
-
4.8% fail on
Exhaust emissions
-
4.8% fail on
Spark ignition
- 4.8% fail on Malfunction indicator lamp
-
4.8% fail on
Spark ignition
-
4.8% fail on
Exhaust emissions
Read the Honest John Review
-
Proton GEN-2 (2004 - 2016)
Decent ride and handling. Tidy styling. Keen pricing.