Isuzu Trooper MOT Results

Registered in 1996
55.1% pass rate
from 158 tests in 2021
(30% worse than other 1996 cars)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Isuzu Trooper is unusually good or bad.

  • 20% fail on Lamps, reflectors and electrical equipment
    • 5.1% fail on Stop lamp
    • 4.4% fail on Headlamps
      • 4.4% fail on Headlamp
    • 3.8% fail on Headlamp aim
      • 3.8% fail on Headlamp aim
    • 3.8% fail on Front and rear fog lamps
      • 3.8% fail on Rear fog lamp
        • 3.8% fail on Rear fog lamp
    • 3.2% fail on Direction indicators
      • 3.2% fail on Flashing type
        • 2.5% fail on Individual direction indicators
        • 0.63% fail on Side repeaters
    • 2.5% fail on Registration plate lamp(s)
    • 1.9% fail on Electrical equipment
      • 1.3% fail on Electrical wiring (9 times worse than other 1996 cars)
      • 0.63% fail on Battery(ies)
    • 1.3% fail on Position lamps (6 times worse than other 1996 cars)
      • 1.3% fail on Position lamp (7 times worse than other 1996 cars)
    • 0.63% fail on Rear reflectors
  • 18% fail on Suspension
    • 7.0% fail on Component mounting prescribed areas
    • 4.4% fail on Anti-roll bars
      • 2.5% fail on Linkage ball joints (4 times worse than other 1996 cars)
      • 1.3% fail on Ball joint (6 times worse than other 1996 cars)
      • 0.63% fail on Attachment bracket and mounting
      • 0.63% fail on Pins and bushes
    • 3.8% fail on Suspension arms
      • 3.2% fail on Ball joint
      • 1.3% fail on Ball joint dust cover
    • 3.2% fail on Springs
      • 3.2% fail on Coil springs
        • 2.5% fail on Coil spring
        • 0.63% fail on Mounting
    • 1.9% fail on Shock absorbers
    • 1.9% fail on Other suspension component
      • 1.3% fail on Ball joint dust cover (6 times worse than other 1996 cars)
      • 0.63% fail on Ball joint
    • 1.3% fail on Wheel bearings
    • 0.63% fail on Sub-frames
      • 0.63% fail on Sub-frame
  • 18% fail on Body, chassis, structure (84% worse than other 1996 cars)
    • 8.2% fail on Transmission (2 times worse than other 1996 cars)
      • 7.0% fail on Drive shafts (2 times worse than other 1996 cars)
        • 7.0% fail on Joints (2 times worse than other 1996 cars)
      • 1.3% fail on Prop shafts
        • 1.3% fail on Joints
        • 0.63% fail on Flexible couplings
    • 6.3% fail on Exhaust system
    • 5.1% fail on Chassis (2 times worse than other 1996 cars)
      • 5.1% fail on Chassis condition (2 times worse than other 1996 cars)
    • 4.4% fail on Integral vehicle structure
      • 4.4% fail on Integral vehicle structure condition
    • 2.5% fail on Bumpers (11 times worse than other 1996 cars)
    • 1.3% fail on Fuel system
      • 1.3% fail on Tank (6 times worse than other 1996 cars)
    • 1.3% fail on Body
      • 0.63% fail on Mounting fixings
      • 0.63% fail on Panel
    • 0.63% fail on Towbar
      • 0.63% fail on Other towbar components
  • 17% fail on Brakes
    • 11% fail on Brake performance
      • 5.7% fail on Service brake performance
        • 5.7% fail on Rbt
          • 5.1% fail on Service brake performance
          • 2.5% fail on Service brake imbalance (3 times worse than other 1996 cars)
      • 4.4% fail on Service Brake Efficiency (sp)
        • 4.4% fail on Rbt (sp)
          • 3.8% fail on Service brake performance
          • 1.9% fail on Service brake imbalance
      • 3.8% fail on Parking brake performance (2 times worse than other 1996 cars)
        • 3.8% fail on Rbt (2 times worse than other 1996 cars)
          • 3.2% fail on Parking brake performance (2 times worse than other 1996 cars)
          • 0.63% fail on Parking (secondary brake performance)
      • 3.8% fail on Parking brake efficiency (sp)
        • 3.8% fail on Rbt (sp)
      • 0.63% fail on Brake performance not tested
    • 5.1% fail on Rigid brake pipes
    • 2.5% fail on Mechanical brake components
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
    • 1.3% fail on Load sensing valves (6 times worse than other 1996 cars)
    • 0.63% fail on Parking brake control
      • 0.63% fail on Lever
    • 0.63% fail on Pressure storage reservoirs
      • 0.63% fail on Air and vacuum systems
    • 0.63% fail on Other components and prescribed areas
      • 0.63% fail on Prescribed areas
        • 0.63% fail on Other braking system component
    • 0.63% fail on ABS / EBS / ESC
      • 0.63% fail on Anti-lock braking system
  • 8.9% fail on Visibility
    • 5.1% fail on Washers
    • 4.4% fail on Wipers
  • 5.1% fail on Seat belts and supplementary restraint systems
    • 5.1% fail on Seat belts
      • 3.8% fail on Prescribed areas
      • 1.3% fail on Condition
  • 3.2% fail on Noise, emissions and leaks
    • 3.2% fail on Exhaust emissions
      • 1.9% fail on Compression ignition
        • 1.3% fail on Pre 01/07/2008 Turbo
        • 0.63% fail on On or after 01/07/2008
        • 0.63% fail on Emissions not tested
      • 1.3% fail on Spark ignition (80% better than other 1996 cars)
        • 0.63% fail on Catalyst emissions
        • 0.63% fail on Malfunction indicator lamp
  • 2.5% fail on Tyres
    • 2.5% fail on Tread depth
  • 1.9% fail on Identification of the vehicle
    • 1.9% fail on Registration plates
  • 1.9% fail on Steering
    • 1.3% fail on Steering linkage components
      • 0.63% fail on Drag link end
      • 0.63% fail on Track rod end
    • 0.63% fail on Steering gear
      • 0.63% fail on Steering box
    • 0.63% fail on Steering wheel
  • 1.3% fail on Road Wheels
    • 1.3% fail on Attachment

Search Good Garages