Peugeot iOn MOT Results

Registered in 2012

81.4% pass rate

from 177 tests in 2021

(40% better than other 2012 cars)

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Peugeot iOn is unusually good or bad.

4.5% fail on Brakes
- 2.8% fail on Brake performance
  - 1.7% fail on Service brake performance
    - 1.7% fail on Rbt
      - 1.7% fail on Service brake performance
  - 0.56% fail on Brake performance not tested
  - 0.56% fail on Service Brake Efficiency (sp)
    - 0.56% fail on Rbt (sp)
      - 0.56% fail on Service brake imbalance
  - 0.56% fail on Parking brake efficiency (sp)
    - 0.56% fail on Rbt (sp)
- 1.7% fail on Rigid brake pipes
- 0.56% fail on ABS / EBS / ESC
  - 0.56% fail on Electronic stability control
4.0% fail on Tyres
- 2.3% fail on Tread depth
- 1.1% fail on Condition
- 0.56% fail on Size/type
3.4% fail on Visibility
- 2.3% fail on Wipers
- 1.1% fail on Washers
3.4% fail on Suspension (64% better than other 2012 cars)
- 1.7% fail on Suspension arms
  - 1.7% fail on Ball joint dust cover (3 times worse than other 2012 cars)
- 1.7% fail on Anti-roll bars
  - 1.7% fail on Linkage ball joint dust cover
- 0.56% fail on Springs
  - 0.56% fail on Coil springs
    - 0.56% fail on Coil spring
- 0.56% fail on Shock absorbers
2.3% fail on Steering
- 2.3% fail on Steering linkage components
  - 2.3% fail on Track rod end
2.3% fail on Lamps, reflectors and electrical equipment (76% better than other 2012 cars)
- 1.7% fail on Headlamps
  - 1.7% fail on Headlamp
- 0.56% fail on Stop lamp
- 0.56% fail on Front and rear fog lamps
  - 0.56% fail on Rear fog lamp
    - 0.56% fail on Rear fog lamp
1.1% fail on Identification of the vehicle
- 1.1% fail on Registration plates
0.56% fail on Seat belts and supplementary restraint systems
- 0.56% fail on SRS malfunction indicator lamp