Peugeot 807 MOT Results
Registered in 200847.4% pass rate
from 266 tests in 2021
(31% worse than other 2008 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2008 cars and highlighted areas where the Peugeot 807 is unusually good or bad.
-
26% fail on
Brakes
(150% worse than other 2008 cars)
-
23% fail on
Brake performance
(3 times worse than other 2008 cars)
-
20% fail on
Parking brake efficiency (sp)
(6 times worse than other 2008 cars)
- 20% fail on Rbt (sp) (7 times worse than other 2008 cars)
-
10% fail on
Parking brake performance
(8 times worse than other 2008 cars)
-
9.8% fail on
Rbt
(8 times worse than other 2008 cars)
- 9.0% fail on Parking brake performance (8 times worse than other 2008 cars)
- 0.38% fail on Parking (secondary brake performance)
- 0.38% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.38% fail on
Plate brake tester
- 0.38% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
9.8% fail on
Rbt
(8 times worse than other 2008 cars)
-
2.3% fail on
Service brake performance
-
2.3% fail on
Rbt
- 1.9% fail on Service brake performance
- 0.38% fail on Service brake imbalance
-
2.3% fail on
Rbt
-
0.75% fail on
Service Brake Efficiency (sp)
-
0.75% fail on
Rbt (sp)
- 0.75% fail on Service brake performance
-
0.75% fail on
Rbt (sp)
-
20% fail on
Parking brake efficiency (sp)
(6 times worse than other 2008 cars)
-
3.0% fail on
Mechanical brake components
-
1.9% fail on
Brake linings and pads
- 1.9% fail on Brake pads
-
1.1% fail on
Brake cables, rods, levers and linkages
(6 times worse than other 2008 cars)
- 0.75% fail on Cable (6 times worse than other 2008 cars)
- 0.38% fail on Lever
-
0.38% fail on
Brake discs and drums
- 0.38% fail on Brake discs
-
1.9% fail on
Brake linings and pads
-
2.3% fail on
Parking brake control
(3 times worse than other 2008 cars)
- 2.3% fail on Lever (4 times worse than other 2008 cars)
-
1.9% fail on
Service brake pedal or hand lever
(3 times worse than other 2008 cars)
- 1.1% fail on Hand lever (3 times worse than other 2008 cars)
- 0.75% fail on Pedal
-
1.5% fail on
ABS / EBS / ESC
- 0.75% fail on Anti-lock braking system
- 0.75% fail on Electronic stability control
- 0.75% fail on Rigid brake pipes
-
0.38% fail on
Hand operated control valves
- 0.38% fail on Condition
-
0.38% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.38% fail on Hydraulic brake callipers
-
23% fail on
Brake performance
(3 times worse than other 2008 cars)
-
21% fail on
Suspension
-
8.3% fail on
Suspension arms
- 6.0% fail on Ball joint (200% worse than other 2008 cars)
- 1.5% fail on Ball joint dust cover
- 0.75% fail on Pins and bushes
-
7.9% fail on
Anti-roll bars
(85% worse than other 2008 cars)
- 3.8% fail on Linkage ball joint dust cover (160% worse than other 2008 cars)
- 2.3% fail on Linkage ball joints
- 1.5% fail on Ball joint dust cover
- 0.75% fail on Ball joint
-
7.1% fail on
Springs
-
7.1% fail on
Coil springs
- 7.1% fail on Coil spring
-
7.1% fail on
Coil springs
- 1.9% fail on Component mounting prescribed areas
- 0.38% fail on Wheel bearings
-
0.38% fail on
Sub-frames
- 0.38% fail on Ball joint
-
0.38% fail on
Other suspension component
- 0.38% fail on Ball joint
-
8.3% fail on
Suspension arms
-
18% fail on
Lamps, reflectors and electrical equipment
- 8.3% fail on Stop lamp (120% worse than other 2008 cars)
-
5.3% fail on
Headlamps
- 5.3% fail on Headlamp
-
4.5% fail on
Direction indicators
-
4.5% fail on
Flashing type
- 3.8% fail on Individual direction indicators (180% worse than other 2008 cars)
- 0.38% fail on All direction indicators
- 0.38% fail on Side repeaters
-
4.5% fail on
Flashing type
- 3.8% fail on Registration plate lamp(s)
-
1.1% fail on
Headlamp aim
- 0.75% fail on Headlamp aim
- 0.38% fail on Headlamp aim not tested
-
0.75% fail on
Position lamps
- 0.38% fail on All position lamps
- 0.38% fail on Position lamp
-
17% fail on
Body, chassis, structure
(170% worse than other 2008 cars)
-
12% fail on
Transmission
(3 times worse than other 2008 cars)
-
11% fail on
Drive shafts
(3 times worse than other 2008 cars)
- 11% fail on Joints (3 times worse than other 2008 cars)
-
0.75% fail on
Prop shafts
(5 times worse than other 2008 cars)
- 0.75% fail on Joints (7 times worse than other 2008 cars)
-
11% fail on
Drive shafts
(3 times worse than other 2008 cars)
- 4.5% fail on Exhaust system
-
3.0% fail on
Doors
(6 times worse than other 2008 cars)
-
2.6% fail on
Other passenger's door
(14 times worse than other 2008 cars)
- 2.6% fail on Door condition (14 times worse than other 2008 cars)
-
0.38% fail on
Driver's door
- 0.38% fail on Door condition
-
2.6% fail on
Other passenger's door
(14 times worse than other 2008 cars)
-
1.5% fail on
Seats
(11 times worse than other 2008 cars)
- 1.1% fail on Driver's seat (15 times worse than other 2008 cars)
- 0.38% fail on Passenger's seat
-
1.1% fail on
Integral vehicle structure
(3 times worse than other 2008 cars)
-
0.75% fail on
Sub-frame
(28 times worse than other 2008 cars)
- 0.38% fail on Sub-frame condition
- 0.38% fail on Strengthening plate
- 0.75% fail on Integral vehicle structure condition
-
0.75% fail on
Sub-frame
(28 times worse than other 2008 cars)
-
0.38% fail on
Body
- 0.38% fail on Other body component
-
12% fail on
Transmission
(3 times worse than other 2008 cars)
-
9.0% fail on
Visibility
- 4.5% fail on Wipers
- 4.5% fail on Washers
-
0.75% fail on
View to rear
- 0.75% fail on Mirrors
-
0.38% fail on
Condition of glass
- 0.38% fail on Windscreen
-
4.9% fail on
Steering
-
3.4% fail on
Steering linkage components
- 3.4% fail on Track rod end
-
1.5% fail on
Power steering
(7 times worse than other 2008 cars)
- 1.5% fail on Operation (17 times worse than other 2008 cars)
-
1.1% fail on
Steering gear
- 1.1% fail on Steering rack
- 0.38% fail on Steering wheel
-
3.4% fail on
Steering linkage components
-
4.5% fail on
Tyres
- 3.4% fail on Tread depth
- 1.1% fail on Condition
- 0.38% fail on Size/type
-
4.1% fail on
Noise, emissions and leaks
-
4.1% fail on
Exhaust emissions
-
2.6% fail on
Spark ignition
- 2.3% fail on Malfunction indicator lamp
- 0.75% fail on Catalyst emissions
-
1.9% fail on
Compression ignition
- 0.75% fail on Pre 01/07/2008 Turbo
-
0.38% fail on
Emission control equipment
- 0.38% fail on Other emission control equipment
- 0.38% fail on Malfunction indicator lamp
- 0.38% fail on Emissions not tested
-
2.6% fail on
Spark ignition
-
4.1% fail on
Exhaust emissions
-
3.4% fail on
Seat belts and supplementary restraint systems
-
1.9% fail on
Seat belts
- 0.75% fail on Prescribed areas
- 0.75% fail on Condition
- 0.38% fail on Requirements
- 1.9% fail on SRS malfunction indicator lamp
-
1.9% fail on
Seat belts
-
0.38% fail on
Seat belt installation check
- 0.38% fail on Belt(s)/padding
-
0.38% fail on
Road Wheels
- 0.38% fail on Attachment
Read the Honest John Review
-
Peugeot 807 (2003 - 2010)
Practical, versatile cabin packed with safety and comfort features. Most seat seven. Easy to drive. Five-star crash test rating.