Peugeot 806 MOT Results

Registered in 2000
47.6% pass rate
from 63 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Peugeot 806 is unusually good or bad.

  • 32% fail on Suspension (110% worse than other 2000 cars)
    • 11% fail on Component mounting prescribed areas
    • 7.9% fail on Springs
      • 7.9% fail on Coil springs
        • 7.9% fail on Coil spring
    • 4.8% fail on Suspension arms
      • 1.6% fail on Pins and bushes
      • 1.6% fail on Ball joint
      • 1.6% fail on Ball joint dust cover
    • 4.8% fail on Sub-frames (5 times worse than other 2000 cars)
      • 3.2% fail on Sub-frame (9 times worse than other 2000 cars)
      • 1.6% fail on Sub-frame mounting prescribed areas
    • 1.6% fail on Axles
      • 1.6% fail on Swivel pins and bushes
    • 1.6% fail on Wheel bearings
    • 1.6% fail on Shock absorbers
    • 1.6% fail on Macpherson strut
      • 1.6% fail on Pins and bushes
  • 16% fail on Body, chassis, structure
    • 9.5% fail on Transmission (2 times worse than other 2000 cars)
      • 9.5% fail on Drive shafts (2 times worse than other 2000 cars)
        • 9.5% fail on Joints (2 times worse than other 2000 cars)
    • 3.2% fail on Doors (5 times worse than other 2000 cars)
      • 3.2% fail on Other passenger's door (12 times worse than other 2000 cars)
        • 3.2% fail on Door condition (12 times worse than other 2000 cars)
    • 1.6% fail on Integral vehicle structure
      • 1.6% fail on Integral vehicle structure condition
    • 1.6% fail on Chassis
      • 1.6% fail on Chassis condition
    • 1.6% fail on Exhaust system
  • 13% fail on Lamps, reflectors and electrical equipment
    • 9.5% fail on Stop lamp
    • 3.2% fail on Front and rear fog lamps
      • 3.2% fail on Rear fog lamp
        • 3.2% fail on Rear fog lamp
    • 3.2% fail on Registration plate lamp(s)
    • 1.6% fail on Headlamps
      • 1.6% fail on Headlamp
    • 1.6% fail on Headlamp aim
      • 1.6% fail on Headlamp aim
  • 11% fail on Steering (190% worse than other 2000 cars)
    • 6.3% fail on Steering gear (5 times worse than other 2000 cars)
      • 6.3% fail on Steering rack (5 times worse than other 2000 cars)
    • 3.2% fail on Steering linkage components
      • 3.2% fail on Track rod end
    • 1.6% fail on Prescribed areas
  • 7.9% fail on Brakes
    • 3.2% fail on Rigid brake pipes
    • 3.2% fail on Mechanical brake components
      • 1.6% fail on Brake linings and pads
        • 1.6% fail on Brake pads
      • 1.6% fail on Brake discs and drums
        • 1.6% fail on Brake discs
    • 1.6% fail on Brake performance
      • 1.6% fail on Parking brake efficiency (sp)
        • 1.6% fail on Rbt (sp)
    • 1.6% fail on ABS / EBS / ESC
      • 1.6% fail on Anti-lock braking system
  • 7.9% fail on Tyres
    • 4.8% fail on Tread depth
    • 1.6% fail on Size/type
    • 1.6% fail on Condition
  • 3.2% fail on Visibility
    • 1.6% fail on Wipers
    • 1.6% fail on Washers
  • 3.2% fail on Noise, emissions and leaks
    • 3.2% fail on Exhaust emissions
      • 1.6% fail on Spark ignition
        • 1.6% fail on Catalyst emissions
      • 1.6% fail on Compression ignition
        • 1.6% fail on Malfunction indicator lamp

Search Good Garages