MOT Results

Honest John Good Garage Guide MOT Results » Peugeot » 508 RXH » 2012

Peugeot 508 RXH MOT Results

Registered in 2012
68.9% pass rate
from 4,524 tests in 2021
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Peugeot 508 RXH is unusually good or bad.

  • 10% fail on Lamps, reflectors and electrical equipment (13% worse than other 2012 cars)
    • 3.6% fail on Registration plate lamp(s) (160% worse than other 2012 cars)
    • 3.0% fail on Headlamps (29% worse than other 2012 cars)
      • 2.8% fail on Headlamp (27% worse than other 2012 cars)
      • 0.15% fail on Headlamp levelling device
      • 0.088% fail on Headlamp cleaning device
    • 2.6% fail on Headlamp aim
      • 2.2% fail on Headlamp aim
      • 0.42% fail on Headlamp aim not tested
    • 2.5% fail on Direction indicators (48% worse than other 2012 cars)
      • 2.5% fail on Flashing type (47% worse than other 2012 cars)
        • 1.5% fail on Side repeaters (130% worse than other 2012 cars)
        • 1.0% fail on Individual direction indicators
        • 0.066% fail on All direction indicators
      • 0.022% fail on Semaphore
        • 0.022% fail on Arm
    • 0.35% fail on Stop lamp (82% better than other 2012 cars)
    • 0.11% fail on Rear reflectors
    • 0.088% fail on Front and rear fog lamps (77% better than other 2012 cars)
      • 0.088% fail on Rear fog lamp (77% better than other 2012 cars)
        • 0.088% fail on Rear fog lamp (77% better than other 2012 cars)
    • 0.066% fail on Electrical equipment
      • 0.044% fail on Trailer electrical socket
      • 0.022% fail on Battery(ies)
    • 0.022% fail on Position lamps
      • 0.022% fail on Position lamp
    • 0.022% fail on Reversing lamps
      • 0.022% fail on Reversing lamps
  • 9.0% fail on Suspension
    • 5.5% fail on Springs (27% worse than other 2012 cars)
      • 5.5% fail on Coil springs (27% worse than other 2012 cars)
        • 5.5% fail on Coil spring (28% worse than other 2012 cars)
        • 0.13% fail on Mounting (6 times worse than other 2012 cars)
    • 1.9% fail on Anti-roll bars
      • 1.0% fail on Linkage ball joints (68% worse than other 2012 cars)
      • 0.44% fail on Ball joint (150% worse than other 2012 cars)
      • 0.20% fail on Linkage ball joint dust cover
      • 0.088% fail on Linkage pins and bushes
      • 0.066% fail on Linkage
      • 0.044% fail on Ball joint dust cover
      • 0.022% fail on Anti-roll bar
      • 0.022% fail on Attachment bracket and mounting
      • 0.022% fail on Pins and bushes
    • 1.6% fail on Suspension arms (48% better than other 2012 cars)
      • 0.91% fail on Ball joint (41% better than other 2012 cars)
      • 0.64% fail on Pins and bushes (49% better than other 2012 cars)
      • 0.088% fail on Ball joint dust cover (75% better than other 2012 cars)
      • 0.022% fail on Suspension arm
      • 0.022% fail on Attachment bracket and mounting
    • 0.24% fail on Macpherson strut (180% worse than other 2012 cars)
      • 0.18% fail on Attachment bracket and mounting (5 times worse than other 2012 cars)
      • 0.044% fail on Pins and bushes
      • 0.022% fail on Macpherson strut
    • 0.22% fail on Wheel bearings
    • 0.18% fail on Shock absorbers (67% better than other 2012 cars)
    • 0.13% fail on Other suspension component
      • 0.11% fail on Ball joint
      • 0.022% fail on Other suspension component
    • 0.044% fail on Sub-frames
      • 0.044% fail on Attachment bracket and mounting (7 times worse than other 2012 cars)
    • 0.022% fail on Suspension rods
      • 0.022% fail on Suspension rod
  • 6.7% fail on Brakes
    • 3.9% fail on Mechanical brake components (40% worse than other 2012 cars)
      • 3.3% fail on Brake linings and pads (59% worse than other 2012 cars)
        • 3.2% fail on Brake pads (58% worse than other 2012 cars)
        • 0.044% fail on Brake linings
      • 0.88% fail on Brake discs and drums
        • 0.88% fail on Brake discs
      • 0.066% fail on Brake cables, rods, levers and linkages
        • 0.066% fail on Cable
    • 2.3% fail on Brake performance
      • 1.5% fail on Parking brake efficiency (sp) (44% worse than other 2012 cars)
        • 1.5% fail on Rbt (sp) (52% worse than other 2012 cars)
      • 0.62% fail on Service brake performance (56% better than other 2012 cars)
        • 0.60% fail on Rbt (57% better than other 2012 cars)
          • 0.51% fail on Service brake performance (57% better than other 2012 cars)
          • 0.13% fail on Service brake imbalance
        • 0.022% fail on Plate brake tester
          • 0.022% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.35% fail on Parking brake performance
        • 0.33% fail on Rbt
          • 0.29% fail on Parking brake performance
          • 0.022% fail on Parking (secondary brake performance)
          • 0.022% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
        • 0.022% fail on Decelerometer
          • 0.022% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.33% fail on Service Brake Efficiency (sp)
        • 0.33% fail on Rbt (sp)
          • 0.24% fail on Service brake performance
          • 0.088% fail on Service brake imbalance (69% better than other 2012 cars)
      • 0.066% fail on Brake performance not tested
    • 0.38% fail on Service brake pedal or hand lever
      • 0.29% fail on Hand lever (120% worse than other 2012 cars)
      • 0.088% fail on Pedal
    • 0.29% fail on Brake actuators (including spring brakes or hydraulic cylinders) (2 times worse than other 2012 cars)
      • 0.24% fail on Hydraulic brake callipers (2 times worse than other 2012 cars)
      • 0.044% fail on Hydraulic brake cylinder
    • 0.24% fail on Parking brake control
      • 0.22% fail on Lever
      • 0.022% fail on Electronic parking brake
    • 0.20% fail on ABS / EBS / ESC
      • 0.13% fail on Anti-lock braking system
      • 0.13% fail on Electronic stability control
    • 0.11% fail on Hydraulic systems
      • 0.11% fail on Brake fluid
    • 0.022% fail on Rigid brake pipes
    • 0.022% fail on Flexible brake hoses
  • 6.4% fail on Tyres (17% worse than other 2012 cars)
    • 4.2% fail on Tread depth (39% worse than other 2012 cars)
    • 2.5% fail on Condition
    • 0.15% fail on Size/type
  • 4.2% fail on Visibility
    • 2.4% fail on Washers
    • 1.7% fail on Wipers
    • 0.13% fail on Bonnet
    • 0.044% fail on View to rear
      • 0.022% fail on Mirrors
      • 0.022% fail on Indirect vision devices
    • 0.022% fail on Driver's view
  • 2.3% fail on Body, chassis, structure
    • 1.6% fail on Transmission (48% worse than other 2012 cars)
      • 1.5% fail on Drive shafts (50% worse than other 2012 cars)
        • 1.5% fail on Joints (49% worse than other 2012 cars)
        • 0.022% fail on Drive shaft
      • 0.044% fail on Prop shafts
        • 0.044% fail on Joints
    • 0.33% fail on Doors (140% worse than other 2012 cars)
      • 0.24% fail on Other passenger's door (3 times worse than other 2012 cars)
        • 0.24% fail on Door condition (3 times worse than other 2012 cars)
      • 0.044% fail on Driver's door
        • 0.044% fail on Door condition
      • 0.044% fail on Front passenger's door
        • 0.044% fail on Door condition
    • 0.13% fail on Bumpers
    • 0.088% fail on Undertray
    • 0.066% fail on Exhaust system (93% better than other 2012 cars)
    • 0.066% fail on Fuel system
      • 0.022% fail on Tank
      • 0.022% fail on Pipe
      • 0.022% fail on Fuel cap/sealing device
    • 0.044% fail on Towbar (14 times worse than other 2012 cars)
      • 0.022% fail on Towbar condition
      • 0.022% fail on Other towbar components
    • 0.022% fail on Engine mounting
      • 0.022% fail on Engine mounting condition
    • 0.022% fail on Body
      • 0.022% fail on Other body component
  • 2.3% fail on Noise, emissions and leaks
    • 2.1% fail on Exhaust emissions
      • 1.7% fail on Compression ignition (140% worse than other 2012 cars)
        • 0.91% fail on On or after 01/07/2008 (3 times worse than other 2012 cars)
        • 0.73% fail on Malfunction indicator lamp (86% worse than other 2012 cars)
        • 0.13% fail on Emissions not tested
        • 0.044% fail on Pre 01/07/2008 Turbo
      • 0.40% fail on Spark ignition (68% better than other 2012 cars)
        • 0.40% fail on Malfunction indicator lamp
    • 0.22% fail on Fluid leaks
      • 0.20% fail on Engine oil leaks
      • 0.022% fail on Transmission oil leaks
    • 0.022% fail on Noise suppression
      • 0.022% fail on Undertray
  • 0.66% fail on Steering (57% better than other 2012 cars)
    • 0.38% fail on Steering linkage components (72% better than other 2012 cars)
      • 0.35% fail on Track rod end (72% better than other 2012 cars)
      • 0.022% fail on Ball joint
    • 0.20% fail on Power steering (4 times worse than other 2012 cars)
      • 0.15% fail on Operation (6 times worse than other 2012 cars)
      • 0.088% fail on Other components (10 times worse than other 2012 cars)
      • 0.022% fail on Pipes and hoses
    • 0.088% fail on Steering gear
      • 0.088% fail on Steering rack
    • 0.022% fail on Electronic power steering
  • 0.60% fail on Seat belts and supplementary restraint systems
    • 0.35% fail on SRS malfunction indicator lamp
    • 0.22% fail on Seat belts
      • 0.22% fail on Condition
    • 0.022% fail on Airbags
      • 0.022% fail on Drivers airbag
  • 0.53% fail on Road Wheels
    • 0.44% fail on Attachment
    • 0.088% fail on Condition
  • 0.42% fail on Identification of the vehicle
    • 0.42% fail on Registration plates
  • 0.022% fail on Seat belt installation check
    • 0.022% fail on Anchorages

Search Good Garages