Peugeot 5008 MOT Results
Registered in 201255.7% pass rate
from 2,398 tests in 2021
(48% worse than other 2012 cars)
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Peugeot 5008 is unusually good or bad.
-
19% fail on
Lamps, reflectors and electrical equipment
(100% worse than other 2012 cars)
- 8.8% fail on Stop lamp (3 times worse than other 2012 cars)
-
5.8% fail on
Headlamps
(150% worse than other 2012 cars)
- 5.8% fail on Headlamp (160% worse than other 2012 cars)
- 0.042% fail on Headlamp cleaning device
- 3.6% fail on Registration plate lamp(s) (160% worse than other 2012 cars)
-
3.2% fail on
Headlamp aim
- 2.5% fail on Headlamp aim
- 0.67% fail on Headlamp aim not tested (170% worse than other 2012 cars)
-
1.4% fail on
Front and rear fog lamps
(2 times worse than other 2012 cars)
-
1.4% fail on
Rear fog lamp
(2 times worse than other 2012 cars)
- 1.4% fail on Rear fog lamp (2 times worse than other 2012 cars)
-
1.4% fail on
Rear fog lamp
(2 times worse than other 2012 cars)
-
0.38% fail on
Reversing lamps
- 0.38% fail on Reversing lamps
-
0.29% fail on
Direction indicators
(83% better than other 2012 cars)
-
0.29% fail on
Flashing type
(82% better than other 2012 cars)
- 0.17% fail on Individual direction indicators (82% better than other 2012 cars)
- 0.083% fail on Side repeaters (87% better than other 2012 cars)
- 0.042% fail on All direction indicators
-
0.29% fail on
Flashing type
(82% better than other 2012 cars)
-
0.083% fail on
Position lamps
- 0.083% fail on Position lamp
- 0.083% fail on Rear reflectors
-
0.083% fail on
Electrical equipment
- 0.042% fail on Trailer electrical socket
- 0.042% fail on Electrical wiring
- 0.042% fail on Battery(ies)
-
12% fail on
Brakes
(96% worse than other 2012 cars)
-
5.9% fail on
Mechanical brake components
(110% worse than other 2012 cars)
-
4.5% fail on
Brake linings and pads
(120% worse than other 2012 cars)
- 4.5% fail on Brake pads (120% worse than other 2012 cars)
- 0.042% fail on Brake linings
-
2.4% fail on
Brake discs and drums
(150% worse than other 2012 cars)
- 2.4% fail on Brake discs (150% worse than other 2012 cars)
-
4.5% fail on
Brake linings and pads
(120% worse than other 2012 cars)
-
5.9% fail on
Brake performance
(130% worse than other 2012 cars)
-
4.2% fail on
Parking brake efficiency (sp)
(3 times worse than other 2012 cars)
- 4.2% fail on Rbt (sp) (3 times worse than other 2012 cars)
- 0.042% fail on Plate brake tester (sp)
-
1.4% fail on
Service brake performance
-
1.4% fail on
Rbt
- 1.3% fail on Service brake performance
- 0.13% fail on Service brake imbalance
-
1.4% fail on
Rbt
-
0.67% fail on
Service Brake Efficiency (sp)
-
0.67% fail on
Rbt (sp)
- 0.42% fail on Service brake imbalance
- 0.25% fail on Service brake performance
-
0.67% fail on
Rbt (sp)
-
0.63% fail on
Parking brake performance
-
0.58% fail on
Rbt
- 0.46% fail on Parking brake performance
- 0.083% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles) (6 times worse than other 2012 cars)
- 0.042% fail on Parking (secondary brake performance)
-
0.042% fail on
Plate brake tester
- 0.042% fail on Parking (secondary brake performance)
-
0.58% fail on
Rbt
- 0.25% fail on Brake performance not tested
-
4.2% fail on
Parking brake efficiency (sp)
(3 times worse than other 2012 cars)
-
0.75% fail on
Parking brake control
(2 times worse than other 2012 cars)
- 0.75% fail on Electronic parking brake (18 times worse than other 2012 cars)
-
0.63% fail on
Service brake pedal or hand lever
(200% worse than other 2012 cars)
- 0.63% fail on Pedal (6 times worse than other 2012 cars)
-
0.33% fail on
ABS / EBS / ESC
- 0.21% fail on Anti-lock braking system
- 0.21% fail on Electronic stability control
- 0.083% fail on Electronic braking system
- 0.21% fail on Flexible brake hoses
-
0.17% fail on
Hydraulic systems
- 0.083% fail on Reservoirs (10 times worse than other 2012 cars)
- 0.042% fail on Brake fluid
- 0.042% fail on Valves
- 0.042% fail on Rigid brake pipes
-
0.042% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.042% fail on Hydraulic brake callipers
-
5.9% fail on
Mechanical brake components
(110% worse than other 2012 cars)
-
9.6% fail on
Suspension
-
5.4% fail on
Suspension arms
(75% worse than other 2012 cars)
- 3.3% fail on Ball joint (110% worse than other 2012 cars)
- 2.3% fail on Pins and bushes (78% worse than other 2012 cars)
- 0.21% fail on Ball joint dust cover
-
2.1% fail on
Anti-roll bars
- 1.1% fail on Linkage ball joints (86% worse than other 2012 cars)
- 0.67% fail on Linkage ball joint dust cover
- 0.33% fail on Ball joint
- 0.042% fail on Ball joint dust cover
-
2.0% fail on
Springs
(55% better than other 2012 cars)
-
2.0% fail on
Coil springs
(55% better than other 2012 cars)
- 2.0% fail on Coil spring (55% better than other 2012 cars)
-
2.0% fail on
Coil springs
(55% better than other 2012 cars)
-
0.58% fail on
Other suspension component
(2 times worse than other 2012 cars)
- 0.58% fail on Ball joint (5 times worse than other 2012 cars)
- 0.25% fail on Shock absorbers
-
0.21% fail on
Macpherson strut
- 0.17% fail on Attachment bracket and mounting (5 times worse than other 2012 cars)
- 0.083% fail on Ball joint (22 times worse than other 2012 cars)
- 0.042% fail on Wheel bearings
-
0.042% fail on
Suspension rods
- 0.042% fail on Ball joint dust cover
-
5.4% fail on
Suspension arms
(75% worse than other 2012 cars)
-
9.1% fail on
Tyres
(66% worse than other 2012 cars)
- 4.8% fail on Condition (80% worse than other 2012 cars)
- 4.8% fail on Tread depth (58% worse than other 2012 cars)
- 0.13% fail on Size/type
-
6.4% fail on
Visibility
(45% worse than other 2012 cars)
- 4.0% fail on Washers (92% worse than other 2012 cars)
- 2.3% fail on Wipers
-
0.21% fail on
View to rear
- 0.21% fail on Mirrors
- 0.083% fail on Bonnet
-
0.083% fail on
Condition of glass
- 0.083% fail on Windscreen
-
5.4% fail on
Body, chassis, structure
(110% worse than other 2012 cars)
-
4.4% fail on
Transmission
(3 times worse than other 2012 cars)
-
4.3% fail on
Drive shafts
(3 times worse than other 2012 cars)
- 4.3% fail on Joints (3 times worse than other 2012 cars)
-
0.13% fail on
Prop shafts
- 0.13% fail on Joints
-
4.3% fail on
Drive shafts
(3 times worse than other 2012 cars)
-
0.38% fail on
Seats
(6 times worse than other 2012 cars)
- 0.25% fail on Passenger's seat (11 times worse than other 2012 cars)
- 0.13% fail on Driver's seat
- 0.29% fail on Exhaust system (70% better than other 2012 cars)
- 0.13% fail on Bumpers
-
0.13% fail on
Doors
-
0.083% fail on
Other passenger's door
- 0.042% fail on Door condition
- 0.042% fail on Catch
-
0.042% fail on
Driver's door
- 0.042% fail on Hinge
-
0.083% fail on
Other passenger's door
- 0.13% fail on Undertray
-
4.4% fail on
Transmission
(3 times worse than other 2012 cars)
-
2.8% fail on
Seat belts and supplementary restraint systems
(3 times worse than other 2012 cars)
- 1.7% fail on SRS malfunction indicator lamp (3 times worse than other 2012 cars)
-
1.0% fail on
Seat belts
(2 times worse than other 2012 cars)
- 1.0% fail on Condition (3 times worse than other 2012 cars)
- 0.042% fail on Prescribed areas
-
0.042% fail on
Airbags
- 0.042% fail on Passengers airbag
-
2.4% fail on
Steering
(54% worse than other 2012 cars)
-
2.1% fail on
Steering linkage components
(58% worse than other 2012 cars)
- 2.0% fail on Track rod end (55% worse than other 2012 cars)
- 0.17% fail on Ball joint
- 0.042% fail on Drag link end
-
0.13% fail on
Steering gear
- 0.13% fail on Steering rack
-
0.13% fail on
Power steering
- 0.083% fail on Operation
- 0.042% fail on Other components
- 0.042% fail on Steering wheel
-
2.1% fail on
Steering linkage components
(58% worse than other 2012 cars)
-
1.8% fail on
Noise, emissions and leaks
-
1.8% fail on
Exhaust emissions
-
1.1% fail on
Compression ignition
- 0.71% fail on Malfunction indicator lamp
- 0.33% fail on On or after 01/07/2008
- 0.042% fail on On or after 01/01/2014
- 0.042% fail on Emissions not tested
-
0.63% fail on
Spark ignition
(50% better than other 2012 cars)
- 0.46% fail on Malfunction indicator lamp
- 0.13% fail on Catalyst emissions (76% better than other 2012 cars)
- 0.042% fail on Non catalyst emissions
-
1.1% fail on
Compression ignition
-
0.13% fail on
Fluid leaks
- 0.13% fail on Engine oil leaks
-
0.042% fail on
Noise suppression
- 0.042% fail on Undertray
-
1.8% fail on
Exhaust emissions
-
0.75% fail on
Road Wheels
(100% worse than other 2012 cars)
- 0.67% fail on Attachment (140% worse than other 2012 cars)
- 0.083% fail on Condition
-
0.21% fail on
Identification of the vehicle
- 0.21% fail on Registration plates
Read the Honest John Review
-
Peugeot 5008 (2010 - 2017)
Practical and versatile seating layout, good range of engines, comfortable to drive, good value as a used buy.