MOT Results

Honest John Good Garage Guide MOT Results » Peugeot » 405 » 1993

Peugeot 405 MOT Results

Registered in 1993
53.0% pass rate
from 66 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Peugeot 405 is unusually good or bad.

  • 24% fail on Brakes (120% worse than other 1993 cars)
    • 18% fail on Brake performance (140% worse than other 1993 cars)
      • 7.6% fail on Service brake performance
        • 7.6% fail on Rbt
          • 7.6% fail on Service brake performance
          • 1.5% fail on Service brake imbalance
      • 7.6% fail on Parking brake efficiency (sp)
        • 7.6% fail on Rbt (sp)
      • 6.1% fail on Service Brake Efficiency (sp)
        • 6.1% fail on Rbt (sp)
          • 6.1% fail on Service brake imbalance
          • 1.5% fail on Service brake performance
      • 3.0% fail on Parking brake performance
        • 3.0% fail on Rbt
          • 1.5% fail on Parking brake performance
          • 1.5% fail on Parking (secondary brake performance)
    • 4.5% fail on Rigid brake pipes
    • 3.0% fail on Parking brake control (5 times worse than other 1993 cars)
      • 3.0% fail on Lever (5 times worse than other 1993 cars)
    • 1.5% fail on Service brake pedal or hand lever
      • 1.5% fail on Hand lever
    • 1.5% fail on Hydraulic systems
      • 1.5% fail on Servos
    • 1.5% fail on Load sensing valves
    • 1.5% fail on Mechanical brake components
      • 1.5% fail on Brake linings and pads
        • 1.5% fail on Brake pads
  • 17% fail on Steering (3 times worse than other 1993 cars)
    • 17% fail on Steering gear (14 times worse than other 1993 cars)
      • 17% fail on Steering rack (17 times worse than other 1993 cars)
    • 3.0% fail on Steering linkage components
      • 3.0% fail on Track rod end
  • 15% fail on Suspension
    • 7.6% fail on Component mounting prescribed areas
    • 6.1% fail on Suspension arms
      • 3.0% fail on Ball joint
      • 1.5% fail on Pins and bushes
      • 1.5% fail on Ball joint dust cover
    • 3.0% fail on Shock absorbers
    • 3.0% fail on Sub-frames
      • 1.5% fail on Sub-frame
      • 1.5% fail on Sub-frame mounting prescribed areas
    • 1.5% fail on Wheel bearings
    • 1.5% fail on Anti-roll bars
      • 1.5% fail on Linkage
  • 15% fail on Body, chassis, structure
    • 6.1% fail on Transmission
      • 6.1% fail on Drive shafts
        • 6.1% fail on Joints
    • 4.5% fail on Exhaust system
    • 1.5% fail on Integral vehicle structure
      • 1.5% fail on Integral vehicle structure condition
    • 1.5% fail on Chassis
      • 1.5% fail on Chassis condition
    • 1.5% fail on Body
      • 1.5% fail on Mounting fixings
    • 1.5% fail on Floor
    • 1.5% fail on Seats
      • 1.5% fail on Driver's seat
  • 14% fail on Visibility
    • 9.1% fail on Washers
    • 4.5% fail on Wipers
    • 1.5% fail on Condition of glass
      • 1.5% fail on Windscreen
  • 14% fail on Lamps, reflectors and electrical equipment
    • 6.1% fail on Headlamp aim
      • 4.5% fail on Headlamp aim
      • 1.5% fail on Headlamp aim not tested
    • 4.5% fail on Headlamps
      • 4.5% fail on Headlamp
    • 3.0% fail on Direction indicators
      • 3.0% fail on Flashing type
        • 3.0% fail on Side repeaters
    • 1.5% fail on Stop lamp
    • 1.5% fail on Front and rear fog lamps
      • 1.5% fail on Rear fog lamp
        • 1.5% fail on Rear fog lamp
  • 6.1% fail on Tyres
    • 3.0% fail on Tread depth
    • 1.5% fail on Size/type
    • 1.5% fail on Condition
  • 4.5% fail on Noise, emissions and leaks
    • 4.5% fail on Exhaust emissions
      • 3.0% fail on Spark ignition
        • 1.5% fail on Catalyst emissions
        • 1.5% fail on Emissions not tested
      • 1.5% fail on Compression ignition
        • 1.5% fail on Pre 01/07/2008 Turbo

Search Good Garages