Peugeot 4007 MOT Results
Registered in 201063.0% pass rate
from 284 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Peugeot 4007 is unusually good or bad.
-
13% fail on
Steering
(4 times worse than other 2010 cars)
-
13% fail on
Steering linkage components
(5 times worse than other 2010 cars)
- 13% fail on Track rod end (6 times worse than other 2010 cars)
-
0.35% fail on
Power steering
- 0.35% fail on Pipes and hoses
-
13% fail on
Steering linkage components
(5 times worse than other 2010 cars)
-
12% fail on
Brakes
-
3.9% fail on
Mechanical brake components
-
2.1% fail on
Brake linings and pads
- 2.1% fail on Brake pads
-
2.1% fail on
Brake discs and drums
- 2.1% fail on Brake discs
-
2.1% fail on
Brake linings and pads
-
3.5% fail on
Brake performance
-
2.5% fail on
Service brake performance
-
2.5% fail on
Rbt
- 2.5% fail on Service brake performance
-
0.35% fail on
Decelerometer
- 0.35% fail on Service brake performance
-
2.5% fail on
Rbt
-
0.70% fail on
Service Brake Efficiency (sp)
-
0.70% fail on
Rbt (sp)
- 0.70% fail on Service brake imbalance
-
0.70% fail on
Rbt (sp)
- 0.35% fail on Brake performance not tested
-
0.35% fail on
Parking brake performance
-
0.35% fail on
Rbt
- 0.35% fail on Parking brake performance
-
0.35% fail on
Rbt
-
0.35% fail on
Parking brake efficiency (sp)
- 0.35% fail on Rbt (sp)
-
2.5% fail on
Service brake performance
- 3.2% fail on Rigid brake pipes (3 times worse than other 2010 cars)
-
1.1% fail on
ABS / EBS / ESC
- 0.70% fail on Anti-lock braking system
- 0.70% fail on Electronic stability control
-
0.70% fail on
Service brake pedal or hand lever
- 0.35% fail on Pedal
- 0.35% fail on Hand lever
- 0.35% fail on Flexible brake hoses
-
0.35% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.35% fail on Hydraulic brake callipers
-
3.9% fail on
Mechanical brake components
-
12% fail on
Lamps, reflectors and electrical equipment
- 4.9% fail on Stop lamp
- 2.8% fail on Registration plate lamp(s)
-
1.8% fail on
Headlamp aim
- 1.8% fail on Headlamp aim
-
1.4% fail on
Headlamps
- 1.1% fail on Headlamp levelling device (5 times worse than other 2010 cars)
- 0.35% fail on Headlamp
- 0.35% fail on Headlamp cleaning device
-
1.1% fail on
Electrical equipment
- 0.35% fail on Trailer electrical socket
- 0.35% fail on Electrical wiring
- 0.35% fail on Battery(ies)
-
0.70% fail on
Front and rear fog lamps
-
0.70% fail on
Rear fog lamp
- 0.70% fail on Rear fog lamp
-
0.70% fail on
Rear fog lamp
-
0.35% fail on
Position lamps
- 0.35% fail on Position lamp
-
0.35% fail on
Direction indicators
-
0.35% fail on
Flashing type
- 0.35% fail on Individual direction indicators
-
0.35% fail on
Flashing type
- 0.35% fail on Rear reflectors
-
8.1% fail on
Suspension
(39% better than other 2010 cars)
-
5.3% fail on
Anti-roll bars
- 2.5% fail on Linkage ball joint dust cover
- 1.4% fail on Linkage ball joints
- 1.1% fail on Ball joint dust cover
- 0.35% fail on Pins and bushes
-
2.1% fail on
Suspension arms
- 1.1% fail on Ball joint
- 1.1% fail on Ball joint dust cover
- 0.70% fail on Shock absorbers
- 0.35% fail on Wheel bearings
-
0.35% fail on
Springs
-
0.35% fail on
Coil springs
- 0.35% fail on Coil spring
-
0.35% fail on
Coil springs
-
0.35% fail on
Other suspension component
- 0.35% fail on Ball joint
-
5.3% fail on
Anti-roll bars
-
4.6% fail on
Visibility
- 2.8% fail on Wipers
- 2.5% fail on Washers
-
4.6% fail on
Tyres
- 2.5% fail on Tread depth
- 2.1% fail on Condition
-
2.8% fail on
Noise, emissions and leaks
-
2.5% fail on
Exhaust emissions
-
2.1% fail on
Compression ignition
- 1.8% fail on Malfunction indicator lamp (2 times worse than other 2010 cars)
- 0.35% fail on Emissions not tested
-
0.35% fail on
Spark ignition
- 0.35% fail on Malfunction indicator lamp
-
2.1% fail on
Compression ignition
-
0.35% fail on
Noise suppression
- 0.35% fail on Undertray
-
2.5% fail on
Exhaust emissions
-
1.8% fail on
Body, chassis, structure
-
0.70% fail on
Spare wheel
(73 times worse than other 2010 cars)
- 0.35% fail on Spare wheel condition
- 0.35% fail on Carrier
-
0.35% fail on
Fuel system
- 0.35% fail on Fuel cap/sealing device
-
0.35% fail on
Transmission
-
0.35% fail on
Drive shafts
- 0.35% fail on Joints
-
0.35% fail on
Drive shafts
-
0.35% fail on
Doors
-
0.35% fail on
Other passenger's door
- 0.35% fail on Door condition
-
0.35% fail on
Other passenger's door
-
0.70% fail on
Spare wheel
(73 times worse than other 2010 cars)
-
0.70% fail on
Road Wheels
- 0.70% fail on Attachment