Peugeot 309 MOT Results

Registered in 1991

57.6% pass rate

from 99 tests in 2017

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 cars and highlighted areas where the Peugeot 309 is unusually good or bad.

21% fail on Brakes
- 17% fail on Brake performance (85% worse than other 1991 cars)
  - 8.1% fail on Front wheels
  - 6.1% fail on Rear wheels
  - 5.1% fail on Service brake performance
  - 4.0% fail on Parking brake performance
  - 1.0% fail on Brake imbalance
- 6.1% fail on Hydraulic systems
  - 4.0% fail on Components
    - 3.0% fail on Pipes
    - 2.0% fail on Hoses
  - 2.0% fail on Leaks
- 1.0% fail on Parking brake
  - 1.0% fail on Condition
- 1.0% fail on Mechanical components
  - 1.0% fail on Cable
- 1.0% fail on Hub components
  - 1.0% fail on Brake pads
- 1.0% fail on Restricted movement
18% fail on Lamps, Reflectors and Electrical Equipment
- 6.1% fail on Position lamps
  - 3.0% fail on Front lamps
  - 3.0% fail on Rear lamps
- 4.0% fail on Headlamps
  - 3.0% fail on Headlamp
  - 1.0% fail on Headlamp defects which don't require an aim check on retest
    - 1.0% fail on Main beam 'tell-tale'
- 4.0% fail on Direction indicators
  - 4.0% fail on Flashing type
    - 2.0% fail on Individual lamps
    - 2.0% fail on Side repeaters
- 3.0% fail on Registration plate lamp
- 3.0% fail on Rear fog lamp
  - 3.0% fail on Fog lamp
- 3.0% fail on Headlamp aim
- 2.0% fail on Hazard warning
  - 1.0% fail on Lamp
  - 1.0% fail on Switch
- 1.0% fail on Stop lamp
- 1.0% fail on Horn
- 1.0% fail on Headlamp aim not tested
14% fail on Suspension
- 6.1% fail on Drive shafts
  - 6.1% fail on Front drive shafts
    - 6.1% fail on Constant velocity joints
- 5.1% fail on Prescribed areas
  - 4.0% fail on Component mounting
  - 1.0% fail on Spring mounting
- 2.0% fail on Suspension arms
  - 2.0% fail on Pins/bushes/ball joints
- 2.0% fail on Wheel bearings
  - 2.0% fail on Rear
- 1.0% fail on General condition
- 1.0% fail on Macpherson strut
  - 1.0% fail on Condition
- 1.0% fail on Front suspension joints
- 1.0% fail on Shock absorbers
  - 1.0% fail on Condition
9.1% fail on Exhaust, Fuel and Emissions
- 5.1% fail on Exhaust system
- 2.0% fail on Fuel system
  - 1.0% fail on Pipe
  - 1.0% fail on System
- 2.0% fail on Emissions not tested
- 1.0% fail on Emissions
6.1% fail on Steering
- 5.1% fail on Steering system
  - 2.0% fail on Steering rack
  - 2.0% fail on Track rod end
  - 1.0% fail on Ball joint
- 1.0% fail on Power steering
  - 1.0% fail on Pipes and hoses
6.1% fail on Driver's view of the road
- 4.0% fail on Washers
- 2.0% fail on Wipers
- 1.0% fail on Mirrors
5.1% fail on Seat Belts and Supplementary Restraint Systems
- 5.1% fail on Seat belts
  - 4.0% fail on Prescribed areas
  - 1.0% fail on Requirements
4.0% fail on Body, Structure and General Items
- 2.0% fail on Body condition
- 1.0% fail on Doors
  - 1.0% fail on Passengers other
- 1.0% fail on Seats
  - 1.0% fail on Passengers
3.0% fail on Tyres
- 3.0% fail on Tread depth
2.0% fail on Registration plates and VIN
- 2.0% fail on Registration plate