Peugeot 306 MOT Results
Registered in 199354.9% pass rate
from 113 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Peugeot 306 is unusually good or bad.
-
21% fail on
Lamps, Reflectors and Electrical Equipment
-
9.7% fail on
Position lamps
- 9.7% fail on Rear lamps (4 times worse than other 1993 cars)
-
4.4% fail on
Direction indicators
-
4.4% fail on
Flashing type
- 1.8% fail on Individual lamps
- 1.8% fail on Side repeaters
- 0.88% fail on All direction indicators
-
4.4% fail on
Flashing type
- 4.4% fail on Headlamp aim
-
3.5% fail on
Rear fog lamp
- 2.7% fail on Fog lamp
- 0.88% fail on Tell tale
- 1.8% fail on Registration plate lamp
-
1.8% fail on
Headlamps
- 1.8% fail on Headlamp
- 0.88% fail on Battery
- 0.88% fail on Stop lamp
-
9.7% fail on
Position lamps
-
20% fail on
Brakes
-
15% fail on
Brake performance
- 6.2% fail on Rear wheels
- 5.3% fail on Front wheels
- 4.4% fail on Parking brake performance
- 3.5% fail on Service brake performance
- 1.8% fail on Brake imbalance
-
3.5% fail on
Hydraulic systems
-
2.7% fail on
Components
- 0.88% fail on Pipes
- 0.88% fail on Hoses
- 0.88% fail on Reservoirs
- 0.88% fail on Leaks
-
2.7% fail on
Components
-
1.8% fail on
Parking brake
- 1.8% fail on Condition
-
1.8% fail on
Mechanical components
(6 times worse than other 1993 cars)
- 1.8% fail on Cable (7 times worse than other 1993 cars)
-
15% fail on
Brake performance
-
19% fail on
Suspension
-
6.2% fail on
Suspension arms
(2 times worse than other 1993 cars)
- 6.2% fail on Pins/bushes/ball joints (2 times worse than other 1993 cars)
-
4.4% fail on
Anti-roll bars
- 2.7% fail on Linkage pins/bushes/ball joints
- 0.88% fail on Pins/bushes/ball joints
- 0.88% fail on Linkage condition
-
3.5% fail on
Prescribed areas
- 3.5% fail on Subframe mounting
-
3.5% fail on
Drive shafts
-
3.5% fail on
Front drive shafts
- 3.5% fail on Constant velocity joints
-
3.5% fail on
Front drive shafts
-
0.88% fail on
Radius arms
- 0.88% fail on Attachment
-
0.88% fail on
Tie bars/rods
- 0.88% fail on Pins/bushes/ball joints
-
0.88% fail on
Sub-frames
- 0.88% fail on Condition
-
0.88% fail on
Wheel bearings
- 0.88% fail on Rear
- 0.88% fail on Front suspension joints
-
6.2% fail on
Suspension arms
(2 times worse than other 1993 cars)
-
14% fail on
Driver's view of the road
- 9.7% fail on Washers (160% worse than other 1993 cars)
- 5.3% fail on Wipers
- 0.88% fail on Windscreen
-
8.0% fail on
Exhaust, Fuel and Emissions
- 6.2% fail on Emissions
- 1.8% fail on Exhaust system
-
0.88% fail on
Fuel system
- 0.88% fail on System
- 0.88% fail on Emissions not tested
-
6.2% fail on
Steering
-
4.4% fail on
Steering system
- 3.5% fail on Track rod end
- 0.88% fail on Steering rack
-
0.88% fail on
Steering control
- 0.88% fail on Steering column
- 0.88% fail on Prescribed areas
-
4.4% fail on
Steering system
-
3.5% fail on
Tyres
- 3.5% fail on Condition
- 0.88% fail on Tread depth
-
2.7% fail on
Body, Structure and General Items
- 1.8% fail on Body condition
-
1.8% fail on
Doors
- 0.88% fail on Passengers front
- 0.88% fail on Passengers other
-
1.8% fail on
Seat Belts and Supplementary Restraint Systems
-
1.8% fail on
Seat belts
- 1.8% fail on Prescribed areas
-
1.8% fail on
Seat belts
-
0.88% fail on
Registration plates and VIN
- 0.88% fail on Registration plate