Peugeot 207 MOT Results
Registered in 201261.1% pass rate
from 16,107 tests in 2021
(27% worse than other 2012 cars)
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Peugeot 207 is unusually good or bad.
-
17% fail on
Lamps, reflectors and electrical equipment
(84% worse than other 2012 cars)
-
5.2% fail on
Headlamps
(120% worse than other 2012 cars)
- 5.1% fail on Headlamp (130% worse than other 2012 cars)
- 0.075% fail on Headlamp levelling device
- 4.9% fail on Stop lamp (140% worse than other 2012 cars)
- 4.2% fail on Registration plate lamp(s) (2 times worse than other 2012 cars)
-
3.6% fail on
Headlamp aim
(46% worse than other 2012 cars)
- 2.9% fail on Headlamp aim (31% worse than other 2012 cars)
- 0.70% fail on Headlamp aim not tested (180% worse than other 2012 cars)
-
3.4% fail on
Direction indicators
(100% worse than other 2012 cars)
-
3.4% fail on
Flashing type
(100% worse than other 2012 cars)
- 3.1% fail on Individual direction indicators (2 times worse than other 2012 cars)
- 0.18% fail on All direction indicators (130% worse than other 2012 cars)
- 0.16% fail on Side repeaters (76% better than other 2012 cars)
-
3.4% fail on
Flashing type
(100% worse than other 2012 cars)
-
0.25% fail on
Front and rear fog lamps
(33% better than other 2012 cars)
-
0.25% fail on
Rear fog lamp
(33% better than other 2012 cars)
- 0.25% fail on Rear fog lamp (35% better than other 2012 cars)
- 0.0062% fail on Switch
-
0.25% fail on
Rear fog lamp
(33% better than other 2012 cars)
-
0.16% fail on
Electrical equipment
- 0.14% fail on Horn
- 0.012% fail on Battery(ies) (81% better than other 2012 cars)
-
0.12% fail on
Position lamps
- 0.12% fail on Position lamp (90% worse than other 2012 cars)
-
0.093% fail on
Reversing lamps
(51% better than other 2012 cars)
- 0.075% fail on Reversing lamps (60% better than other 2012 cars)
- 0.019% fail on Reversing lamp switch
-
0.012% fail on
Hazard warning
(84% better than other 2012 cars)
- 0.012% fail on Switch (84% better than other 2012 cars)
-
0.012% fail on
Mandatory tell-tales
- 0.0062% fail on Main beam tell-tale
- 0.0062% fail on Rear fog lamp tell-tale
-
5.2% fail on
Headlamps
(120% worse than other 2012 cars)
-
10% fail on
Body, chassis, structure
(3 times worse than other 2012 cars)
-
6.1% fail on
Transmission
(4 times worse than other 2012 cars)
-
5.9% fail on
Drive shafts
(4 times worse than other 2012 cars)
- 5.9% fail on Joints (4 times worse than other 2012 cars)
- 0.012% fail on Drive shaft
- 0.012% fail on Flexible couplings
-
0.14% fail on
Prop shafts
(2 times worse than other 2012 cars)
- 0.14% fail on Joints (3 times worse than other 2012 cars)
- 0.0062% fail on Belts
-
5.9% fail on
Drive shafts
(4 times worse than other 2012 cars)
- 4.5% fail on Exhaust system (3 times worse than other 2012 cars)
-
0.18% fail on
Seats
(2 times worse than other 2012 cars)
- 0.11% fail on Driver's seat (2 times worse than other 2012 cars)
- 0.081% fail on Passenger's seat (3 times worse than other 2012 cars)
-
0.11% fail on
Fuel system
- 0.050% fail on Tank
- 0.025% fail on Pipe
- 0.025% fail on Fuel cap/sealing device (73% better than other 2012 cars)
- 0.0062% fail on Hose
-
0.087% fail on
Body
- 0.075% fail on Other body component
- 0.019% fail on Panel
-
0.087% fail on
Doors
-
0.050% fail on
Driver's door
- 0.025% fail on Catch (13 times worse than other 2012 cars)
- 0.019% fail on Door condition
- 0.0062% fail on Hinge
-
0.031% fail on
Front passenger's door
- 0.031% fail on Door condition
-
0.019% fail on
Other passenger's door
- 0.012% fail on Catch (8 times worse than other 2012 cars)
- 0.0062% fail on Door condition
-
0.050% fail on
Driver's door
- 0.056% fail on Bumpers
-
0.056% fail on
Engine mounting
(170% worse than other 2012 cars)
- 0.031% fail on Bracket (4 times worse than other 2012 cars)
- 0.025% fail on Engine mounting condition
-
0.025% fail on
Chassis
(2 times worse than other 2012 cars)
- 0.019% fail on Chassis condition
- 0.0062% fail on Strengthening plate
- 0.012% fail on Undertray
-
0.0062% fail on
Integral vehicle structure
- 0.0062% fail on Integral vehicle structure condition
-
0.0062% fail on
Towbar
- 0.0062% fail on Other towbar components
-
6.1% fail on
Transmission
(4 times worse than other 2012 cars)
-
8.3% fail on
Suspension
(11% better than other 2012 cars)
-
4.2% fail on
Springs
-
4.2% fail on
Coil springs
- 4.2% fail on Coil spring
- 0.0062% fail on Mounting
-
4.2% fail on
Coil springs
-
2.0% fail on
Suspension arms
(36% better than other 2012 cars)
- 1.5% fail on Ball joint
- 0.34% fail on Ball joint dust cover
- 0.21% fail on Pins and bushes (83% better than other 2012 cars)
- 0.0062% fail on Suspension arm
- 0.0062% fail on Attachment bracket and mounting
-
1.9% fail on
Anti-roll bars
(19% worse than other 2012 cars)
- 1.1% fail on Linkage ball joints (81% worse than other 2012 cars)
- 0.34% fail on Ball joint (90% worse than other 2012 cars)
- 0.22% fail on Linkage ball joint dust cover (46% better than other 2012 cars)
- 0.087% fail on Ball joint dust cover (53% better than other 2012 cars)
- 0.068% fail on Linkage
- 0.025% fail on Anti-roll bar
- 0.012% fail on Linkage pins and bushes
- 0.0062% fail on Attachment bracket and mounting
- 0.0062% fail on Pins and bushes
- 0.0062% fail on Linkage attachment bracket and mounting
- 0.94% fail on Wheel bearings (170% worse than other 2012 cars)
-
0.14% fail on
Other suspension component
- 0.087% fail on Ball joint
- 0.050% fail on Ball joint dust cover
- 0.012% fail on Other suspension component
- 0.0062% fail on Pins and bushes
- 0.056% fail on Shock absorbers (89% better than other 2012 cars)
-
0.037% fail on
Macpherson strut
- 0.019% fail on Attachment bracket and mounting
- 0.012% fail on Pins and bushes
- 0.0062% fail on Macpherson strut
-
0.0062% fail on
Suspension rods
- 0.0062% fail on Ball joint
-
0.0062% fail on
Sub-frames
- 0.0062% fail on Sub-frame
- 0.0062% fail on Component mounting prescribed areas
-
4.2% fail on
Springs
-
5.4% fail on
Brakes
(9.3% better than other 2012 cars)
-
2.8% fail on
Brake performance
-
2.0% fail on
Service brake performance
(40% worse than other 2012 cars)
-
1.9% fail on
Rbt
(42% worse than other 2012 cars)
- 1.8% fail on Service brake performance (52% worse than other 2012 cars)
- 0.25% fail on Service brake imbalance
- 0.0062% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.019% fail on
Plate brake tester
- 0.012% fail on Service brake performance
- 0.0062% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
1.9% fail on
Rbt
(42% worse than other 2012 cars)
-
0.75% fail on
Parking brake efficiency (sp)
(26% better than other 2012 cars)
- 0.75% fail on Rbt (sp) (22% better than other 2012 cars)
-
0.30% fail on
Service Brake Efficiency (sp)
-
0.29% fail on
Rbt (sp)
- 0.18% fail on Service brake imbalance (38% better than other 2012 cars)
- 0.14% fail on Service brake performance
-
0.0062% fail on
Plate brake tester (sp)
- 0.0062% fail on Service brake imbalance
-
0.29% fail on
Rbt (sp)
-
0.28% fail on
Parking brake performance
(39% better than other 2012 cars)
-
0.28% fail on
Rbt
(37% better than other 2012 cars)
- 0.24% fail on Parking brake performance (38% better than other 2012 cars)
- 0.025% fail on Parking (secondary brake performance)
- 0.012% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
-
0.28% fail on
Rbt
(37% better than other 2012 cars)
- 0.11% fail on Brake performance not tested
-
2.0% fail on
Service brake performance
(40% worse than other 2012 cars)
-
2.4% fail on
Mechanical brake components
(15% better than other 2012 cars)
-
1.4% fail on
Brake discs and drums
(42% worse than other 2012 cars)
- 1.4% fail on Brake discs (43% worse than other 2012 cars)
-
1.2% fail on
Brake linings and pads
(42% better than other 2012 cars)
- 1.2% fail on Brake pads (42% better than other 2012 cars)
- 0.019% fail on Brake linings
-
0.031% fail on
Brake cables, rods, levers and linkages
- 0.025% fail on Lever
- 0.0062% fail on Cable
-
1.4% fail on
Brake discs and drums
(42% worse than other 2012 cars)
-
0.42% fail on
Parking brake control
(75% worse than other 2012 cars)
- 0.42% fail on Lever (110% worse than other 2012 cars)
-
0.32% fail on
Service brake pedal or hand lever
(51% worse than other 2012 cars)
- 0.27% fail on Hand lever (110% worse than other 2012 cars)
- 0.043% fail on Pedal
-
0.14% fail on
ABS / EBS / ESC
(57% better than other 2012 cars)
- 0.14% fail on Anti-lock braking system
- 0.0062% fail on Electronic stability control
-
0.093% fail on
Hydraulic systems
- 0.081% fail on Brake fluid (110% worse than other 2012 cars)
- 0.012% fail on Reservoirs
- 0.043% fail on Rigid brake pipes (90% better than other 2012 cars)
- 0.031% fail on Flexible brake hoses
-
0.019% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(77% better than other 2012 cars)
- 0.012% fail on Hydraulic brake cylinder
- 0.0062% fail on Hydraulic brake callipers
-
0.0062% fail on
Air and vacuum systems
- 0.0062% fail on Pressure/vacuum build up
-
0.0062% fail on
Other components and prescribed areas
- 0.0062% fail on Other components
-
2.8% fail on
Brake performance
-
5.3% fail on
Tyres
- 3.5% fail on Tread depth (14% worse than other 2012 cars)
- 1.9% fail on Condition (27% better than other 2012 cars)
- 0.16% fail on Size/type
-
4.5% fail on
Visibility
- 2.8% fail on Washers (32% worse than other 2012 cars)
- 1.8% fail on Wipers (23% better than other 2012 cars)
-
0.043% fail on
View to rear
- 0.043% fail on Mirrors
-
0.037% fail on
Condition of glass
- 0.037% fail on Windscreen
- 0.012% fail on Driver's view
-
2.6% fail on
Noise, emissions and leaks
(27% worse than other 2012 cars)
-
2.4% fail on
Exhaust emissions
(26% worse than other 2012 cars)
-
1.6% fail on
Spark ignition
(26% worse than other 2012 cars)
- 0.83% fail on Catalyst emissions (60% worse than other 2012 cars)
- 0.74% fail on Malfunction indicator lamp
- 0.20% fail on Emissions not tested
- 0.019% fail on Non catalyst emissions
-
0.88% fail on
Compression ignition
(26% worse than other 2012 cars)
- 0.49% fail on On or after 01/07/2008 (120% worse than other 2012 cars)
- 0.30% fail on Malfunction indicator lamp
- 0.099% fail on Emissions not tested
- 0.031% fail on Pre 01/07/2008 Non turbo
- 0.0062% fail on Pre 01/07/2008 Turbo
-
1.6% fail on
Spark ignition
(26% worse than other 2012 cars)
-
0.21% fail on
Fluid leaks
(76% worse than other 2012 cars)
- 0.17% fail on Engine oil leaks (82% worse than other 2012 cars)
- 0.025% fail on Other leaks
- 0.012% fail on Transmission oil leaks
-
2.4% fail on
Exhaust emissions
(26% worse than other 2012 cars)
-
1.9% fail on
Steering
(25% worse than other 2012 cars)
-
1.2% fail on
Steering linkage components
- 1.2% fail on Track rod end
- 0.050% fail on Ball joint
- 0.0062% fail on Drag link end
- 0.0062% fail on Steering arm
-
0.48% fail on
Steering gear
(3 times worse than other 2012 cars)
- 0.47% fail on Steering rack (3 times worse than other 2012 cars)
- 0.012% fail on Operation
-
0.12% fail on
Power steering
(2 times worse than other 2012 cars)
- 0.12% fail on Operation (5 times worse than other 2012 cars)
- 0.12% fail on Electronic power steering (2 times worse than other 2012 cars)
-
0.031% fail on
Steering play
- 0.031% fail on Steering rack
- 0.012% fail on Steering wheel
- 0.0062% fail on Steering column
-
1.2% fail on
Steering linkage components
-
0.78% fail on
Seat belts and supplementary restraint systems
- 0.52% fail on SRS malfunction indicator lamp (37% worse than other 2012 cars)
-
0.25% fail on
Seat belts
- 0.22% fail on Condition
- 0.012% fail on Attachment
- 0.0062% fail on Prescribed areas
- 0.0062% fail on Requirements
-
0.0062% fail on
Airbags
- 0.0062% fail on Drivers airbag
-
0.38% fail on
Identification of the vehicle
- 0.38% fail on Registration plates
-
0.35% fail on
Road Wheels
- 0.29% fail on Attachment
- 0.062% fail on Condition
-
0.0062% fail on
Seat belt installation check
- 0.0062% fail on Anchorages