Peugeot 205 MOT Results

Registered in 1993

58.9% pass rate

from 387 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Peugeot 205 is unusually good or bad.

21% fail on Lamps, reflectors and electrical equipment (45% worse than other 1993 cars)
- 7.5% fail on Headlamp aim (95% worse than other 1993 cars)
  - 7.2% fail on Headlamp aim (100% worse than other 1993 cars)
  - 0.26% fail on Headlamp aim not tested
- 7.0% fail on Headlamps (120% worse than other 1993 cars)
  - 7.0% fail on Headlamp (130% worse than other 1993 cars)
- 4.7% fail on Stop lamp
- 3.6% fail on Direction indicators
  - 3.6% fail on Flashing type
    - 2.8% fail on Individual direction indicators
    - 1.0% fail on Side repeaters
    - 0.26% fail on All direction indicators
- 3.6% fail on Electrical equipment (120% worse than other 1993 cars)
  - 2.3% fail on Horn (2 times worse than other 1993 cars)
  - 1.6% fail on Battery(ies)
- 2.8% fail on Front and rear fog lamps
  - 2.8% fail on Rear fog lamp
    - 2.8% fail on Rear fog lamp
- 0.52% fail on Registration plate lamp(s)
16% fail on Brakes (47% worse than other 1993 cars)
- 15% fail on Brake performance (92% worse than other 1993 cars)
  - 9.0% fail on Service Brake Efficiency (sp) (190% worse than other 1993 cars)
    - 9.0% fail on Rbt (sp) (200% worse than other 1993 cars)
      - 6.7% fail on Service brake imbalance (2 times worse than other 1993 cars)
      - 3.6% fail on Service brake performance (140% worse than other 1993 cars)
  - 6.7% fail on Service brake performance (120% worse than other 1993 cars)
    - 6.7% fail on Rbt (130% worse than other 1993 cars)
      - 5.7% fail on Service brake performance (130% worse than other 1993 cars)
      - 1.0% fail on Service brake imbalance
  - 2.3% fail on Parking brake efficiency (sp)
    - 2.1% fail on Rbt (sp)
    - 0.26% fail on Decelerometer (sp)
  - 1.6% fail on Parking brake performance
    - 1.3% fail on Rbt
      - 1.3% fail on Parking brake performance
    - 0.26% fail on Plate brake tester
      - 0.26% fail on Parking (secondary brake performance)
  - 0.52% fail on Brake performance not tested
- 2.6% fail on Rigid brake pipes
- 1.3% fail on Mechanical brake components
  - 0.52% fail on Brake linings and pads
    - 0.52% fail on Brake pads
  - 0.52% fail on Brake discs and drums
    - 0.52% fail on Brake discs
  - 0.26% fail on Brake cables, rods, levers and linkages
    - 0.26% fail on Cable
- 0.78% fail on Service brake pedal or hand lever
  - 0.52% fail on Pedal
  - 0.26% fail on Hand lever
- 0.78% fail on Hydraulic systems
  - 0.52% fail on Brake fluid
  - 0.26% fail on Reservoirs
- 0.52% fail on Parking brake control
  - 0.52% fail on Lever
- 0.52% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.52% fail on Hydraulic brake cylinder (5 times worse than other 1993 cars)
- 0.26% fail on Air and vacuum systems
  - 0.26% fail on Leaks
- 0.26% fail on Load sensing valves
- 0.26% fail on Other components and prescribed areas
  - 0.26% fail on Prescribed areas
    - 0.26% fail on Master cylinder/servo mounting
13% fail on Suspension
- 5.2% fail on Suspension arms (100% worse than other 1993 cars)
  - 2.6% fail on Ball joint (180% worse than other 1993 cars)
  - 1.3% fail on Ball joint dust cover
  - 1.0% fail on Pins and bushes
  - 0.26% fail on Suspension arm
- 2.8% fail on Component mounting prescribed areas
- 1.6% fail on Anti-roll bars
  - 0.52% fail on Ball joint dust cover
  - 0.52% fail on Linkage ball joint dust cover
  - 0.26% fail on Linkage pins and bushes
  - 0.26% fail on Linkage attachment bracket and mounting
- 1.3% fail on Springs
  - 1.3% fail on Coil springs
    - 1.3% fail on Coil spring
- 1.0% fail on Wheel bearings
- 1.0% fail on Sub-frames
  - 0.78% fail on Sub-frame (4 times worse than other 1993 cars)
  - 0.26% fail on Sub-frame mounting prescribed areas
- 0.78% fail on Shock absorbers
- 0.52% fail on Axles
  - 0.26% fail on Axle
  - 0.26% fail on Stub axle
- 0.52% fail on Macpherson strut
  - 0.52% fail on Attachment bracket and mounting (9 times worse than other 1993 cars)
11% fail on Visibility (60% worse than other 1993 cars)
- 7.8% fail on Washers (96% worse than other 1993 cars)
- 4.4% fail on Wipers
10% fail on Noise, emissions and leaks
- 9.6% fail on Exhaust emissions
  - 9.3% fail on Spark ignition
    - 6.7% fail on Catalyst emissions
    - 2.3% fail on Emissions not tested
    - 0.78% fail on Non catalyst emissions
    - 0.26% fail on Emission control equipment
      - 0.26% fail on Catalytic converter
  - 0.26% fail on Compression ignition
    - 0.26% fail on Pre 01/07/2008 Non turbo
- 1.0% fail on Fluid leaks
  - 0.78% fail on Engine oil leaks
  - 0.26% fail on Hydraulic fluid leaks
9.3% fail on Body, chassis, structure
- 5.7% fail on Transmission (120% worse than other 1993 cars)
  - 5.7% fail on Drive shafts (160% worse than other 1993 cars)
    - 5.7% fail on Joints (160% worse than other 1993 cars)
- 1.8% fail on Exhaust system
- 1.3% fail on Integral vehicle structure
  - 1.3% fail on Integral vehicle structure condition
  - 0.26% fail on Sub-frame
    - 0.26% fail on Sub-frame condition
- 0.78% fail on Doors
  - 0.52% fail on Front passenger's door
    - 0.52% fail on Door condition
  - 0.26% fail on Other passenger's door
    - 0.26% fail on Door condition
- 0.52% fail on Chassis
  - 0.52% fail on Chassis condition
- 0.52% fail on Fuel system
  - 0.26% fail on Hose
  - 0.26% fail on Pipe
- 0.52% fail on Seats
  - 0.26% fail on Driver's seat
  - 0.26% fail on Passenger's seat
3.6% fail on Seat belts and supplementary restraint systems
- 3.6% fail on Seat belts
  - 1.8% fail on Prescribed areas
  - 1.8% fail on Condition (190% worse than other 1993 cars)
  - 0.26% fail on Attachment
  - 0.26% fail on Requirements
2.6% fail on Tyres
- 1.6% fail on Condition
- 1.0% fail on Tread depth
2.3% fail on Steering
- 1.0% fail on Steering gear
  - 1.0% fail on Steering rack
- 1.0% fail on Steering linkage components
  - 1.0% fail on Track rod end
- 0.26% fail on Steering column
1.3% fail on Identification of the vehicle
- 1.3% fail on Registration plates
0.26% fail on Speedometer and speed limiter
- 0.26% fail on Speedometer