Peugeot 1007 MOT Results

Registered in 2008
59.3% pass rate
from 194 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2008 cars and highlighted areas where the Peugeot 1007 is unusually good or bad.

  • 15% fail on Lamps, reflectors and electrical equipment
    • 6.2% fail on Headlamp aim
      • 6.2% fail on Headlamp aim
    • 4.1% fail on Headlamps
      • 4.1% fail on Headlamp
    • 4.1% fail on Stop lamp
    • 2.6% fail on Registration plate lamp(s)
    • 1.0% fail on Position lamps
      • 1.0% fail on Position lamp
    • 0.52% fail on Direction indicators
      • 0.52% fail on Flashing type
        • 0.52% fail on Individual direction indicators
    • 0.52% fail on Front and rear fog lamps
      • 0.52% fail on Rear fog lamp
        • 0.52% fail on Rear fog lamp
    • 0.52% fail on Electrical equipment
      • 0.52% fail on Horn
  • 12% fail on Body, chassis, structure (110% worse than other 2008 cars)
    • 6.7% fail on Transmission (170% worse than other 2008 cars)
      • 6.2% fail on Drive shafts (160% worse than other 2008 cars)
        • 6.2% fail on Joints (160% worse than other 2008 cars)
      • 0.52% fail on Prop shafts
        • 0.52% fail on Joints
    • 2.6% fail on Exhaust system
    • 1.0% fail on Seats (7 times worse than other 2008 cars)
      • 1.0% fail on Passenger's seat (19 times worse than other 2008 cars)
    • 0.52% fail on Fuel system
      • 0.52% fail on Fuel cap/sealing device
    • 0.52% fail on Bumpers
    • 0.52% fail on Body
      • 0.52% fail on Panel
    • 0.52% fail on Doors
      • 0.52% fail on Driver's door
        • 0.52% fail on Door condition
  • 11% fail on Suspension
    • 4.1% fail on Anti-roll bars
      • 2.1% fail on Linkage ball joints
      • 1.5% fail on Linkage ball joint dust cover
      • 0.52% fail on Ball joint dust cover
    • 3.1% fail on Springs
      • 3.1% fail on Coil springs
        • 3.1% fail on Coil spring
    • 2.1% fail on Wheel bearings
    • 1.5% fail on Suspension arms
      • 1.0% fail on Ball joint
      • 0.52% fail on Ball joint dust cover
    • 0.52% fail on Shock absorbers
    • 0.52% fail on Macpherson strut
      • 0.52% fail on Attachment bracket and mounting
  • 9.3% fail on Brakes
    • 5.7% fail on Brake performance
      • 3.6% fail on Service brake performance
        • 3.6% fail on Rbt
          • 2.6% fail on Service brake performance
          • 1.5% fail on Service brake imbalance
      • 2.1% fail on Parking brake performance
        • 2.1% fail on Rbt
          • 1.5% fail on Parking brake performance
          • 0.52% fail on Parking (secondary brake performance)
      • 2.1% fail on Parking brake efficiency (sp)
        • 2.1% fail on Rbt (sp)
      • 0.52% fail on Service Brake Efficiency (sp)
        • 0.52% fail on Rbt (sp)
          • 0.52% fail on Service brake imbalance
    • 2.1% fail on ABS / EBS / ESC
      • 1.5% fail on Electronic stability control (5 times worse than other 2008 cars)
      • 0.52% fail on Anti-lock braking system
    • 1.0% fail on Mechanical brake components
      • 1.0% fail on Brake discs and drums
        • 1.0% fail on Brake discs
      • 0.52% fail on Brake linings and pads
        • 0.52% fail on Brake pads
    • 0.52% fail on Rigid brake pipes
  • 6.2% fail on Visibility
    • 4.1% fail on Wipers
    • 1.5% fail on Washers
    • 0.52% fail on View to rear
      • 0.52% fail on Mirrors
  • 6.2% fail on Tyres
    • 3.6% fail on Condition
    • 2.6% fail on Tread depth
    • 0.52% fail on Size/type
  • 3.6% fail on Noise, emissions and leaks
    • 3.6% fail on Exhaust emissions
      • 2.6% fail on Compression ignition
        • 2.6% fail on Pre 01/07/2008 Turbo (3 times worse than other 2008 cars)
      • 1.0% fail on Spark ignition
        • 0.52% fail on Malfunction indicator lamp
        • 0.52% fail on Emissions not tested
    • 1.0% fail on Fluid leaks
      • 1.0% fail on Engine oil leaks
  • 2.1% fail on Seat belts and supplementary restraint systems
    • 1.5% fail on Seat belts
      • 1.0% fail on Condition
      • 0.52% fail on Prescribed areas
    • 0.52% fail on SRS malfunction indicator lamp
  • 1.5% fail on Steering
    • 0.52% fail on Steering linkage components
      • 0.52% fail on Ball joint
    • 0.52% fail on Power steering
      • 0.52% fail on Operation
    • 0.52% fail on Electronic power steering
  • 0.52% fail on Identification of the vehicle
    • 0.52% fail on Registration plates
  • 0.52% fail on Road Wheels
    • 0.52% fail on Attachment

Search Good Garages