Perodua Myvi MOT Results
Registered in 201075.2% pass rate
from 483 tests in 2017
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Perodua Myvi is unusually good or bad.
-
7.9% fail on
Tyres
- 5.4% fail on Tread depth
- 2.7% fail on Condition
- 0.21% fail on Size/type
-
6.8% fail on
Driver's view of the road
- 5.4% fail on Wipers (100% worse than other 2010 cars)
- 1.9% fail on Washers
- 0.21% fail on Windscreen
-
5.2% fail on
Lamps, Reflectors and Electrical Equipment
(61% better than other 2010 cars)
- 2.1% fail on Headlamp aim
-
1.2% fail on
Position lamps
- 1.2% fail on Front lamps
- 0.83% fail on Registration plate lamp (77% better than other 2010 cars)
-
0.41% fail on
Headlamps
(82% better than other 2010 cars)
- 0.41% fail on Headlamp (81% better than other 2010 cars)
- 0.41% fail on Stop lamp (83% better than other 2010 cars)
-
0.41% fail on
Direction indicators
-
0.41% fail on
Flashing type
- 0.41% fail on Side repeaters
-
0.41% fail on
Flashing type
- 0.21% fail on Battery
-
5.0% fail on
Steering
(3 times worse than other 2010 cars)
-
4.8% fail on
Steering system
(4 times worse than other 2010 cars)
- 4.6% fail on Steering rack (34 times worse than other 2010 cars)
- 0.21% fail on Track rod end
-
0.21% fail on
Power steering
- 0.21% fail on Other components
-
4.8% fail on
Steering system
(4 times worse than other 2010 cars)
-
4.6% fail on
Brakes
-
1.9% fail on
Brake performance
- 0.62% fail on Front wheels
- 0.62% fail on Rear wheels
- 0.62% fail on Parking brake performance
- 0.21% fail on Brake imbalance
- 0.21% fail on Service brake performance
- 0.21% fail on Brake performance not tested
-
1.7% fail on
Hub components
- 1.4% fail on Brake pads
- 0.41% fail on Brake discs
-
1.0% fail on
Hydraulic systems
-
0.83% fail on
Components
- 0.83% fail on Pipes
- 0.21% fail on Brake fluid warning lamp
-
0.83% fail on
Components
- 0.41% fail on ABS
-
0.21% fail on
Parking brake
- 0.21% fail on Condition
-
1.9% fail on
Brake performance
-
3.5% fail on
Suspension
(57% better than other 2010 cars)
-
2.9% fail on
Anti-roll bars
- 2.3% fail on Linkage pins/bushes/ball joints
- 0.62% fail on Pins/bushes/ball joints
-
0.41% fail on
Macpherson strut
- 0.41% fail on Condition
-
0.21% fail on
Wheel bearings
- 0.21% fail on Front
-
2.9% fail on
Anti-roll bars
-
0.21% fail on
Body, Structure and General Items
-
0.21% fail on
Seats
- 0.21% fail on Drivers
-
0.21% fail on
Seats
-
0.21% fail on
Registration plates and VIN
- 0.21% fail on Registration plate
Read the Honest John Review
-
Perodua Myvi (2006 - 2017)
Good spec, roomy, low running costs, reliable Toyota engine and transmission and excellent value for money.