Hyundai Sonata MOT Results
Registered in 200463.0% pass rate
from 73 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2004 cars and highlighted areas where the Hyundai Sonata is unusually good or bad.
-
14% fail on
Brakes
- 5.5% fail on Rigid brake pipes
-
5.5% fail on
Mechanical brake components
-
5.5% fail on
Brake linings and pads
- 5.5% fail on Brake pads
-
1.4% fail on
Brake discs and drums
- 1.4% fail on Brake discs
-
5.5% fail on
Brake linings and pads
-
4.1% fail on
Brake performance
-
2.7% fail on
Service brake performance
-
1.4% fail on
Rbt
- 1.4% fail on Service brake imbalance
-
1.4% fail on
Plate brake tester
- 1.4% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
1.4% fail on
Rbt
-
2.7% fail on
Service Brake Efficiency (sp)
-
2.7% fail on
Rbt (sp)
- 2.7% fail on Service brake performance (6 times worse than other 2004 cars)
-
2.7% fail on
Rbt (sp)
-
1.4% fail on
Parking brake efficiency (sp)
- 1.4% fail on Rbt (sp)
-
2.7% fail on
Service brake performance
-
1.4% fail on
ABS / EBS / ESC
- 1.4% fail on Anti-lock braking system
-
12% fail on
Lamps, reflectors and electrical equipment
-
6.8% fail on
Headlamp aim
- 4.1% fail on Headlamp aim
- 2.7% fail on Headlamp aim not tested (4 times worse than other 2004 cars)
-
4.1% fail on
Headlamps
- 2.7% fail on Headlamp
- 1.4% fail on Headlamp levelling device
- 2.7% fail on Stop lamp
-
2.7% fail on
Electrical equipment
- 1.4% fail on Trailer electrical socket
- 1.4% fail on Battery(ies)
-
1.4% fail on
Position lamps
- 1.4% fail on Position lamp
-
1.4% fail on
Direction indicators
-
1.4% fail on
Flashing type
- 1.4% fail on Individual direction indicators
-
1.4% fail on
Flashing type
-
1.4% fail on
Front and rear fog lamps
-
1.4% fail on
Rear fog lamp
- 1.4% fail on Rear fog lamp
-
1.4% fail on
Rear fog lamp
-
6.8% fail on
Headlamp aim
-
11% fail on
Visibility
- 9.6% fail on Wipers
- 2.7% fail on Washers
-
11% fail on
Suspension
-
5.5% fail on
Suspension arms
- 2.7% fail on Pins and bushes
- 1.4% fail on Suspension arm
- 1.4% fail on Ball joint dust cover
-
4.1% fail on
Anti-roll bars
- 2.7% fail on Linkage ball joints
- 1.4% fail on Pins and bushes
- 1.4% fail on Linkage pins and bushes
- 1.4% fail on Wheel bearings
-
1.4% fail on
Sub-frames
- 1.4% fail on Sub-frame mounting prescribed areas
-
1.4% fail on
Other suspension component
- 1.4% fail on Attachment bracket and mounting
-
5.5% fail on
Suspension arms
-
8.2% fail on
Body, chassis, structure
-
2.7% fail on
Transmission
-
1.4% fail on
Drive shafts
- 1.4% fail on Joints
-
1.4% fail on
Prop shafts
- 1.4% fail on Joints
-
1.4% fail on
Drive shafts
- 1.4% fail on Exhaust system
-
1.4% fail on
Fuel system
- 1.4% fail on Fuel cap/sealing device
- 1.4% fail on Bumpers
-
1.4% fail on
Doors
-
1.4% fail on
Driver's door
- 1.4% fail on Door condition
-
1.4% fail on
Driver's door
-
2.7% fail on
Transmission
-
8.2% fail on
Tyres
- 4.1% fail on Condition
- 4.1% fail on Tread depth
-
2.7% fail on
Seat belts and supplementary restraint systems
- 2.7% fail on SRS malfunction indicator lamp
-
2.7% fail on
Noise, emissions and leaks
-
2.7% fail on
Exhaust emissions
-
2.7% fail on
Spark ignition
- 2.7% fail on Malfunction indicator lamp
-
2.7% fail on
Spark ignition
-
2.7% fail on
Exhaust emissions
-
1.4% fail on
Identification of the vehicle
- 1.4% fail on Registration plates
-
1.4% fail on
Steering
-
1.4% fail on
Steering linkage components
- 1.4% fail on Track rod end
-
1.4% fail on
Steering linkage components