MOT Results

Honest John Good Garage Guide MOT Results » Triumph » Dolomite » 1980

Triumph Dolomite MOT Results

Registered in 1980
70.3% pass rate
from 64 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the Triumph Dolomite is unusually good or bad.

  • 16% fail on Lamps, reflectors and electrical equipment
    • 7.8% fail on Headlamp aim
      • 7.8% fail on Headlamp aim
    • 4.7% fail on Headlamps
      • 4.7% fail on Headlamp
    • 4.7% fail on Front and rear fog lamps
      • 4.7% fail on Rear fog lamp
        • 4.7% fail on Rear fog lamp
    • 3.1% fail on Stop lamp
    • 1.6% fail on Direction indicators
      • 1.6% fail on Flashing type
        • 1.6% fail on Individual direction indicators
    • 1.6% fail on Registration plate lamp(s)
  • 13% fail on Visibility
    • 9.4% fail on Washers
    • 3.1% fail on Wipers
  • 13% fail on Noise, emissions and leaks
    • 13% fail on Exhaust emissions
      • 13% fail on Spark ignition
        • 9.4% fail on Non catalyst emissions
        • 3.1% fail on Emissions not tested (6 times worse than other 1980 cars)
  • 6.3% fail on Brakes
    • 4.7% fail on Brake performance
      • 3.1% fail on Parking brake efficiency (sp)
        • 3.1% fail on Rbt (sp)
      • 1.6% fail on Service brake performance
        • 1.6% fail on Rbt
          • 1.6% fail on Service brake performance
      • 1.6% fail on Service Brake Efficiency (sp)
        • 1.6% fail on Rbt (sp)
          • 1.6% fail on Service brake imbalance
      • 1.6% fail on Parking brake performance
        • 1.6% fail on Rbt
          • 1.6% fail on Parking brake performance
    • 1.6% fail on Parking brake control
      • 1.6% fail on Lever
    • 1.6% fail on Rigid brake pipes
    • 1.6% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.6% fail on Hydraulic brake callipers
    • 1.6% fail on Load sensing valves
  • 6.3% fail on Suspension
    • 3.1% fail on Suspension arms
      • 3.1% fail on Ball joint dust cover (10 times worse than other 1980 cars)
    • 3.1% fail on Component mounting prescribed areas
    • 1.6% fail on Wheel bearings
    • 1.6% fail on Other suspension component
      • 1.6% fail on Pins and bushes
  • 3.1% fail on Steering
    • 1.6% fail on Steering gear
      • 1.6% fail on Steering rack
    • 1.6% fail on Steering column
  • 1.6% fail on Body, chassis, structure
    • 1.6% fail on Exhaust system
  • 1.6% fail on Seat belts and supplementary restraint systems
    • 1.6% fail on Seat belts
      • 1.6% fail on Prescribed areas
  • 1.6% fail on Road Wheels
    • 1.6% fail on Attachment

Search Good Garages