Toyota Previa MOT Results

Registered in 2012
80.0% pass rate
from 521 tests in 2021
(34% better than other 2012 cars)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Toyota Previa is unusually good or bad.

  • 11% fail on Lamps, reflectors and electrical equipment
    • 4.0% fail on Front and rear fog lamps (9 times worse than other 2012 cars)
      • 4.0% fail on Rear fog lamp (9 times worse than other 2012 cars)
        • 4.0% fail on Rear fog lamp (9 times worse than other 2012 cars)
    • 3.3% fail on Headlamps
      • 2.9% fail on Headlamp
      • 0.19% fail on Dipswitch
      • 0.19% fail on Headlamp cleaning device
    • 3.1% fail on Registration plate lamp(s) (120% worse than other 2012 cars)
    • 2.3% fail on Stop lamp
    • 1.2% fail on Headlamp aim
      • 0.96% fail on Headlamp aim
      • 0.19% fail on Headlamp aim not tested
    • 0.19% fail on Direction indicators
      • 0.19% fail on Flashing type
        • 0.19% fail on Side repeaters
  • 5.4% fail on Suspension (43% better than other 2012 cars)
    • 3.5% fail on Anti-roll bars (120% worse than other 2012 cars)
      • 1.7% fail on Linkage ball joint dust cover (3 times worse than other 2012 cars)
      • 0.96% fail on Ball joint dust cover (4 times worse than other 2012 cars)
      • 0.58% fail on Linkage ball joints
      • 0.19% fail on Linkage
    • 0.77% fail on Suspension arms (75% better than other 2012 cars)
      • 0.58% fail on Pins and bushes
      • 0.19% fail on Ball joint
    • 0.58% fail on Shock absorbers
    • 0.58% fail on Component mounting prescribed areas (35 times worse than other 2012 cars)
    • 0.19% fail on Axles
      • 0.19% fail on Swivel joints/housing
    • 0.19% fail on Sub-frames
      • 0.19% fail on Pins and bushes
  • 4.6% fail on Visibility
    • 3.6% fail on Wipers
    • 0.96% fail on Washers
  • 3.3% fail on Brakes (45% better than other 2012 cars)
    • 1.9% fail on Brake performance
      • 1.2% fail on Parking brake efficiency (sp)
        • 0.96% fail on Rbt (sp)
        • 0.19% fail on Decelerometer (sp)
      • 0.58% fail on Service brake performance
        • 0.58% fail on Rbt
          • 0.58% fail on Service brake performance
      • 0.58% fail on Service Brake Efficiency (sp)
        • 0.38% fail on Decelerometer (sp) (46 times worse than other 2012 cars)
        • 0.19% fail on Rbt (sp)
          • 0.19% fail on Service brake performance
      • 0.38% fail on Parking brake performance
        • 0.19% fail on Rbt
          • 0.19% fail on Parking brake performance
        • 0.19% fail on Plate brake tester
          • 0.19% fail on Parking brake performance
    • 1.2% fail on Mechanical brake components
      • 0.96% fail on Brake linings and pads
        • 0.96% fail on Brake pads
      • 0.19% fail on Brake discs and drums
        • 0.19% fail on Brake discs
    • 0.38% fail on Rigid brake pipes
    • 0.19% fail on Parking brake control
      • 0.19% fail on Lever
  • 3.1% fail on Body, chassis, structure
    • 0.77% fail on Transmission
      • 0.77% fail on Drive shafts
        • 0.77% fail on Joints
    • 0.77% fail on Doors (4 times worse than other 2012 cars)
      • 0.58% fail on Other passenger's door (9 times worse than other 2012 cars)
        • 0.58% fail on Door condition (10 times worse than other 2012 cars)
      • 0.19% fail on Driver's door
        • 0.19% fail on Door condition
    • 0.38% fail on Exhaust system
    • 0.38% fail on Fuel system
      • 0.38% fail on Fuel cap/sealing device
    • 0.38% fail on Bumpers
    • 0.19% fail on Spare wheel
      • 0.19% fail on Spare wheel condition
    • 0.19% fail on Engine mounting
      • 0.19% fail on Bracket
    • 0.19% fail on Body
      • 0.19% fail on Other body component
  • 2.3% fail on Tyres (58% better than other 2012 cars)
    • 1.2% fail on Tread depth (62% better than other 2012 cars)
    • 0.96% fail on Condition
    • 0.38% fail on Size/type
  • 2.1% fail on Noise, emissions and leaks
    • 2.1% fail on Exhaust emissions
      • 2.1% fail on Spark ignition
        • 1.3% fail on Catalyst emissions
        • 0.58% fail on Malfunction indicator lamp
        • 0.19% fail on Emissions not tested
  • 0.77% fail on Seat belts and supplementary restraint systems
    • 0.58% fail on Seat belts
      • 0.38% fail on Condition
      • 0.19% fail on Requirements
    • 0.19% fail on SRS malfunction indicator lamp
  • 0.58% fail on Identification of the vehicle
    • 0.58% fail on Registration plates
  • 0.38% fail on Steering
    • 0.38% fail on Steering linkage components
      • 0.19% fail on Track rod end
      • 0.19% fail on Locking devices
  • 0.19% fail on Road Wheels
    • 0.19% fail on Attachment

Search Good Garages