Toyota Previa MOT Results
Registered in 199453.1% pass rate
from 81 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the Toyota Previa is unusually good or bad.
-
15% fail on
Brakes
-
7.4% fail on
Brake performance
-
6.2% fail on
Parking brake efficiency (sp)
- 6.2% fail on Rbt (sp)
-
2.5% fail on
Service brake performance
-
2.5% fail on
Rbt
- 2.5% fail on Service brake performance
- 1.2% fail on Service brake imbalance
-
2.5% fail on
Rbt
-
1.2% fail on
Service Brake Efficiency (sp)
-
1.2% fail on
Rbt (sp)
- 1.2% fail on Service brake imbalance
-
1.2% fail on
Rbt (sp)
-
1.2% fail on
Parking brake performance
-
1.2% fail on
Rbt
- 1.2% fail on Parking brake performance
-
1.2% fail on
Rbt
-
6.2% fail on
Parking brake efficiency (sp)
-
3.7% fail on
Mechanical brake components
-
2.5% fail on
Brake linings and pads
- 2.5% fail on Brake pads
-
1.2% fail on
Brake discs and drums
- 1.2% fail on Brake drums
-
2.5% fail on
Brake linings and pads
-
1.2% fail on
Hydraulic systems
- 1.2% fail on Master cylinder
- 1.2% fail on Rigid brake pipes
- 1.2% fail on Flexible brake hoses
- 1.2% fail on Load sensing valves
-
7.4% fail on
Brake performance
-
14% fail on
Lamps, reflectors and electrical equipment
- 6.2% fail on Stop lamp
-
4.9% fail on
Headlamps
- 4.9% fail on Headlamp
-
3.7% fail on
Headlamp aim
- 3.7% fail on Headlamp aim
-
1.2% fail on
Direction indicators
-
1.2% fail on
Flashing type
- 1.2% fail on Individual direction indicators
-
1.2% fail on
Flashing type
-
1.2% fail on
Electrical equipment
- 1.2% fail on Battery(ies)
-
14% fail on
Suspension
- 4.9% fail on Component mounting prescribed areas
-
3.7% fail on
Suspension arms
- 2.5% fail on Ball joint
- 1.2% fail on Ball joint dust cover
-
3.7% fail on
Anti-roll bars
- 2.5% fail on Pins and bushes (8 times worse than other 1994 cars)
- 1.2% fail on Ball joint dust cover
- 1.2% fail on Linkage ball joint dust cover
-
1.2% fail on
Springs
-
1.2% fail on
Coil springs
- 1.2% fail on Coil spring
-
1.2% fail on
Coil springs
-
11% fail on
Noise, emissions and leaks
-
11% fail on
Exhaust emissions
-
11% fail on
Spark ignition
- 8.6% fail on Catalyst emissions
- 2.5% fail on Emissions not tested
-
11% fail on
Spark ignition
-
2.5% fail on
Fluid leaks
- 2.5% fail on Engine oil leaks
-
11% fail on
Exhaust emissions
-
8.6% fail on
Visibility
- 7.4% fail on Wipers
- 1.2% fail on Washers
-
8.6% fail on
Body, chassis, structure
- 4.9% fail on Exhaust system
-
3.7% fail on
Chassis
- 3.7% fail on Chassis condition
-
1.2% fail on
Body
- 1.2% fail on Other body component
-
1.2% fail on
Doors
-
1.2% fail on
Other passenger's door
- 1.2% fail on Door condition
-
1.2% fail on
Other passenger's door
-
4.9% fail on
Tyres
- 3.7% fail on Tread depth
- 1.2% fail on Condition
-
2.5% fail on
Identification of the vehicle
- 2.5% fail on Registration plates
-
1.2% fail on
Steering
-
1.2% fail on
Steering linkage components
- 1.2% fail on Track rod end
-
1.2% fail on
Steering linkage components