Toyota MR2 MOT Results
Registered in 199655.1% pass rate
from 234 tests in 2021
(28% worse than other 1996 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Toyota MR2 is unusually good or bad.
-
23% fail on
Noise, emissions and leaks
(2 times worse than other 1996 cars)
-
23% fail on
Exhaust emissions
(2 times worse than other 1996 cars)
-
22% fail on
Spark ignition
(2 times worse than other 1996 cars)
- 19% fail on Catalyst emissions (2 times worse than other 1996 cars)
- 2.6% fail on Emissions not tested
-
0.43% fail on
Emission control equipment
- 0.43% fail on Catalytic converter
- 0.43% fail on Non catalyst emissions
-
0.85% fail on
Compression ignition
- 0.43% fail on Pre 01/07/2008 Non turbo
- 0.43% fail on On or after 01/07/2008
-
22% fail on
Spark ignition
(2 times worse than other 1996 cars)
-
23% fail on
Exhaust emissions
(2 times worse than other 1996 cars)
-
17% fail on
Brakes
(50% worse than other 1996 cars)
-
15% fail on
Brake performance
(110% worse than other 1996 cars)
-
9.4% fail on
Parking brake efficiency (sp)
(2 times worse than other 1996 cars)
- 9.0% fail on Rbt (sp) (2 times worse than other 1996 cars)
- 0.43% fail on Plate brake tester (sp)
-
6.4% fail on
Service brake performance
(150% worse than other 1996 cars)
-
6.4% fail on
Rbt
(160% worse than other 1996 cars)
- 6.0% fail on Service brake performance (190% worse than other 1996 cars)
- 0.43% fail on Service brake imbalance
-
6.4% fail on
Rbt
(160% worse than other 1996 cars)
-
3.0% fail on
Parking brake performance
(180% worse than other 1996 cars)
-
3.0% fail on
Rbt
(200% worse than other 1996 cars)
- 3.0% fail on Parking brake performance (2 times worse than other 1996 cars)
-
3.0% fail on
Rbt
(200% worse than other 1996 cars)
-
1.7% fail on
Service Brake Efficiency (sp)
-
1.7% fail on
Rbt (sp)
- 1.3% fail on Service brake performance
- 0.43% fail on Service brake imbalance
-
1.7% fail on
Rbt (sp)
- 0.85% fail on Brake performance not tested
-
9.4% fail on
Parking brake efficiency (sp)
(2 times worse than other 1996 cars)
-
2.1% fail on
Mechanical brake components
-
1.3% fail on
Brake linings and pads
- 1.3% fail on Brake pads
-
0.43% fail on
Brake discs and drums
- 0.43% fail on Brake discs
-
0.43% fail on
Brake cables, rods, levers and linkages
- 0.43% fail on Lever
-
1.3% fail on
Brake linings and pads
-
1.3% fail on
Parking brake control
- 1.3% fail on Lever
-
1.3% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(5 times worse than other 1996 cars)
- 1.3% fail on Hydraulic brake callipers (10 times worse than other 1996 cars)
-
1.3% fail on
ABS / EBS / ESC
- 1.3% fail on Anti-lock braking system
- 0.43% fail on Rigid brake pipes
-
15% fail on
Brake performance
(110% worse than other 1996 cars)
-
13% fail on
Suspension
- 6.0% fail on Component mounting prescribed areas
-
3.8% fail on
Anti-roll bars
- 1.7% fail on Linkage ball joint dust cover (4 times worse than other 1996 cars)
- 1.3% fail on Linkage ball joints
- 0.43% fail on Attachment bracket and mounting
- 0.43% fail on Linkage pins and bushes
- 1.7% fail on Wheel bearings
-
0.85% fail on
Suspension arms
- 0.43% fail on Attachment bracket and mounting
- 0.43% fail on Ball joint
-
0.85% fail on
Sub-frames
- 0.85% fail on Sub-frame
-
0.43% fail on
Springs
-
0.43% fail on
Coil springs
- 0.43% fail on Coil spring
-
0.43% fail on
Coil springs
- 0.43% fail on Shock absorbers
-
0.43% fail on
Macpherson strut
- 0.43% fail on Attachment bracket and mounting
-
12% fail on
Body, chassis, structure
- 5.1% fail on Exhaust system
-
3.8% fail on
Integral vehicle structure
- 3.8% fail on Integral vehicle structure condition
-
2.1% fail on
Chassis
- 2.1% fail on Chassis condition
-
0.85% fail on
Body
- 0.43% fail on Body condition
- 0.43% fail on Other body component
- 0.85% fail on Floor
-
11% fail on
Lamps, reflectors and electrical equipment
-
3.4% fail on
Headlamp aim
- 3.4% fail on Headlamp aim
-
2.6% fail on
Electrical equipment
- 2.1% fail on Horn (2 times worse than other 1996 cars)
- 0.43% fail on Battery(ies)
- 2.1% fail on Stop lamp
-
1.3% fail on
Headlamps
- 0.85% fail on Headlamp levelling device
- 0.43% fail on Headlamp
-
1.3% fail on
Direction indicators
-
1.3% fail on
Flashing type
- 1.3% fail on Individual direction indicators
-
1.3% fail on
Flashing type
- 1.3% fail on Registration plate lamp(s)
-
0.85% fail on
Front and rear fog lamps
-
0.85% fail on
Rear fog lamp
- 0.85% fail on Rear fog lamp
-
0.85% fail on
Rear fog lamp
-
0.43% fail on
Mandatory tell-tales
- 0.43% fail on Main beam tell-tale
-
3.4% fail on
Headlamp aim
-
8.5% fail on
Steering
(110% worse than other 1996 cars)
-
7.3% fail on
Steering gear
(5 times worse than other 1996 cars)
- 7.3% fail on Steering rack (6 times worse than other 1996 cars)
-
0.85% fail on
Steering linkage components
- 0.85% fail on Track rod end
-
0.43% fail on
Power steering
- 0.43% fail on Operation
-
7.3% fail on
Steering gear
(5 times worse than other 1996 cars)
-
5.1% fail on
Seat belts and supplementary restraint systems
-
4.7% fail on
Seat belts
- 4.3% fail on Prescribed areas
- 0.43% fail on Condition
-
0.43% fail on
Airbags
- 0.43% fail on Drivers airbag
-
4.7% fail on
Seat belts
-
4.3% fail on
Tyres
- 3.0% fail on Tread depth
- 1.3% fail on Condition
-
3.8% fail on
Visibility
- 3.4% fail on Wipers
- 0.43% fail on Washers
-
1.3% fail on
Identification of the vehicle
- 1.3% fail on Registration plates