MOT Results

Honest John Good Garage Guide MOT Results » Toyota » MR2 » 1988

Toyota MR2 MOT Results

Registered in 1988
72.1% pass rate
from 287 tests in 2020
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Toyota MR2 is unusually good or bad.

  • 10% fail on Brakes
    • 9.1% fail on Brake performance
      • 6.3% fail on Parking brake efficiency (sp) (100% worse than other 1988 cars)
        • 5.9% fail on Rbt (sp) (110% worse than other 1988 cars)
        • 0.35% fail on Decelerometer (sp)
      • 3.1% fail on Service brake performance
        • 3.1% fail on Rbt
          • 3.1% fail on Service brake performance
      • 3.1% fail on Parking brake performance (160% worse than other 1988 cars)
        • 3.1% fail on Rbt (180% worse than other 1988 cars)
          • 3.1% fail on Parking brake performance (2 times worse than other 1988 cars)
      • 2.4% fail on Service Brake Efficiency (sp)
        • 2.4% fail on Rbt (sp)
          • 1.4% fail on Service brake performance
          • 1.4% fail on Service brake imbalance
      • 0.35% fail on Brake performance not tested
    • 1.4% fail on Parking brake control
      • 1.4% fail on Lever
    • 1.4% fail on Mechanical brake components
      • 0.70% fail on Brake linings and pads
        • 0.70% fail on Brake pads
      • 0.35% fail on Brake discs and drums
        • 0.35% fail on Brake discs
      • 0.35% fail on Brake cables, rods, levers and linkages
        • 0.35% fail on Cable
    • 1.0% fail on Service brake pedal or hand lever
      • 0.70% fail on Pedal
      • 0.35% fail on Hand lever
    • 1.0% fail on Hydraulic systems
      • 0.70% fail on Brake fluid
      • 0.35% fail on Reservoirs
    • 0.35% fail on Rigid brake pipes
  • 10% fail on Suspension
    • 6.6% fail on Component mounting prescribed areas
    • 3.5% fail on Anti-roll bars (4 times worse than other 1988 cars)
      • 1.4% fail on Linkage ball joints (28 times worse than other 1988 cars)
      • 0.70% fail on Attachment bracket and mounting (5 times worse than other 1988 cars)
      • 0.70% fail on Linkage ball joint dust cover (6 times worse than other 1988 cars)
      • 0.35% fail on Pins and bushes
      • 0.35% fail on Ball joint dust cover
    • 1.4% fail on Suspension arms
      • 0.35% fail on Suspension arm
      • 0.35% fail on Attachment bracket and mounting
      • 0.35% fail on Pins and bushes
      • 0.35% fail on Ball joint
    • 0.70% fail on Wheel bearings
    • 0.70% fail on Other suspension component
      • 0.70% fail on Ball joint
    • 0.35% fail on Springs
      • 0.35% fail on Coil springs
        • 0.35% fail on Mounting
    • 0.35% fail on Suspension rods
      • 0.35% fail on Suspension rod
  • 10% fail on Lamps, reflectors and electrical equipment (36% better than other 1988 cars)
    • 3.5% fail on Headlamp aim
      • 3.1% fail on Headlamp aim
      • 0.35% fail on Headlamp aim not tested
    • 2.1% fail on Direction indicators
      • 2.1% fail on Flashing type
        • 1.0% fail on Individual direction indicators
        • 1.0% fail on Side repeaters
    • 1.7% fail on Electrical equipment
      • 1.4% fail on Horn
      • 0.35% fail on Electrical wiring
    • 1.4% fail on Headlamps
      • 1.4% fail on Headlamp
    • 1.0% fail on Stop lamp
    • 1.0% fail on Registration plate lamp(s)
    • 0.70% fail on Position lamps
      • 0.70% fail on Position lamp
    • 0.70% fail on Front and rear fog lamps (81% better than other 1988 cars)
      • 0.70% fail on Rear fog lamp (81% better than other 1988 cars)
        • 0.70% fail on Rear fog lamp (80% better than other 1988 cars)
    • 0.35% fail on Mandatory tell-tales
      • 0.35% fail on Main beam tell-tale
  • 5.9% fail on Body, chassis, structure
    • 2.4% fail on Exhaust system
    • 1.7% fail on Integral vehicle structure
      • 1.7% fail on Integral vehicle structure condition
    • 1.0% fail on Chassis
      • 1.0% fail on Chassis condition
    • 0.70% fail on Transmission
      • 0.70% fail on Drive shafts
        • 0.70% fail on Joints
    • 0.35% fail on Body
      • 0.35% fail on Panel
    • 0.35% fail on Cabs
      • 0.35% fail on Prescribed areas
  • 4.5% fail on Visibility
    • 3.1% fail on Wipers
    • 2.4% fail on Washers
  • 3.5% fail on Noise, emissions and leaks
    • 2.4% fail on Exhaust emissions
      • 2.4% fail on Spark ignition
        • 2.1% fail on Non catalyst emissions
        • 0.70% fail on Emissions not tested
    • 1.0% fail on Fluid leaks
      • 1.0% fail on Engine oil leaks
  • 1.4% fail on Seat belts and supplementary restraint systems
    • 1.4% fail on Seat belts
      • 1.4% fail on Prescribed areas
  • 1.0% fail on Tyres
    • 1.0% fail on Condition
  • 0.70% fail on Steering (84% better than other 1988 cars)
    • 0.70% fail on Steering linkage components
      • 0.35% fail on Ball joint
      • 0.35% fail on Track rod end
  • 0.35% fail on Identification of the vehicle
    • 0.35% fail on Registration plates
  • 0.35% fail on Speedometer and speed limiter
    • 0.35% fail on Speedometer
  • 0.35% fail on Road Wheels
    • 0.35% fail on Condition

Search Good Garages