Toyota MR2 MOT Results
Registered in 198677.6% pass rate
from 85 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1986 cars and highlighted areas where the Toyota MR2 is unusually good or bad.
-
9.4% fail on
Brakes
-
9.4% fail on
Brake performance
-
4.7% fail on
Service Brake Efficiency (sp)
-
4.7% fail on
Rbt (sp)
- 3.5% fail on Service brake performance
- 1.2% fail on Service brake imbalance
-
4.7% fail on
Rbt (sp)
-
4.7% fail on
Parking brake efficiency (sp)
- 4.7% fail on Rbt (sp)
-
3.5% fail on
Service brake performance
-
3.5% fail on
Rbt
- 3.5% fail on Service brake performance
-
3.5% fail on
Rbt
-
4.7% fail on
Service Brake Efficiency (sp)
-
1.2% fail on
Parking brake control
- 1.2% fail on Lever
-
1.2% fail on
Mechanical brake components
-
1.2% fail on
Brake linings and pads
- 1.2% fail on Brake pads
-
1.2% fail on
Brake linings and pads
-
9.4% fail on
Brake performance
-
7.1% fail on
Noise, emissions and leaks
-
7.1% fail on
Exhaust emissions
-
7.1% fail on
Spark ignition
- 3.5% fail on Emissions not tested (5 times worse than other 1986 cars)
- 2.4% fail on Catalyst emissions (6 times worse than other 1986 cars)
- 1.2% fail on Non catalyst emissions
- 1.2% fail on Malfunction indicator lamp
-
7.1% fail on
Spark ignition
-
7.1% fail on
Exhaust emissions
-
4.7% fail on
Lamps, reflectors and electrical equipment
(67% better than other 1986 cars)
- 1.2% fail on Stop lamp
-
1.2% fail on
Direction indicators
-
1.2% fail on
Flashing type
- 1.2% fail on Individual direction indicators
-
1.2% fail on
Flashing type
-
1.2% fail on
Front and rear fog lamps
-
1.2% fail on
Rear fog lamp
- 1.2% fail on Rear fog lamp
-
1.2% fail on
Rear fog lamp
-
1.2% fail on
Electrical equipment
- 1.2% fail on Horn
-
4.7% fail on
Suspension
- 3.5% fail on Component mounting prescribed areas
-
1.2% fail on
Anti-roll bars
- 1.2% fail on Pins and bushes
-
4.7% fail on
Body, chassis, structure
-
2.4% fail on
Integral vehicle structure
- 2.4% fail on Integral vehicle structure condition
- 1.2% fail on Exhaust system
-
1.2% fail on
Engine mounting
- 1.2% fail on Bracket
-
1.2% fail on
Doors
-
1.2% fail on
Driver's door
- 1.2% fail on Door condition
-
1.2% fail on
Driver's door
-
2.4% fail on
Integral vehicle structure
-
3.5% fail on
Visibility
- 2.4% fail on Wipers
- 2.4% fail on Washers
-
2.4% fail on
Seat belts and supplementary restraint systems
-
2.4% fail on
Seat belts
- 2.4% fail on Prescribed areas
-
2.4% fail on
Seat belts
-
1.2% fail on
Identification of the vehicle
- 1.2% fail on Registration plates
-
1.2% fail on
Steering
-
1.2% fail on
Steering linkage components
- 1.2% fail on Track rod end
-
1.2% fail on
Steering linkage components
-
1.2% fail on
Speedometer and speed limiter
- 1.2% fail on Speedometer
-
1.2% fail on
Road Wheels
- 1.2% fail on Attachment