Toyota Land Cruiser MOT Results
Registered in 201786.1% pass rate
from 462 tests in 2021
Pass rate by mileage
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2017 cars and highlighted areas where the Toyota Land Cruiser is unusually good or bad.
-
4.8% fail on
Visibility
- 4.3% fail on Wipers
-
0.22% fail on
Condition of glass
- 0.22% fail on Windscreen
- 0.22% fail on Washers
-
3.2% fail on
Brakes
-
2.6% fail on
Mechanical brake components
-
2.6% fail on
Brake linings and pads
- 2.4% fail on Brake pads
- 0.22% fail on Brake linings
-
2.6% fail on
Brake linings and pads
-
0.43% fail on
Brake performance
-
0.22% fail on
Service Brake Efficiency (sp)
-
0.22% fail on
Rbt (sp)
- 0.22% fail on Service brake performance
-
0.22% fail on
Rbt (sp)
-
0.22% fail on
Parking brake efficiency (sp)
- 0.22% fail on Decelerometer (sp)
-
0.22% fail on
Service Brake Efficiency (sp)
-
0.22% fail on
Hydraulic systems
- 0.22% fail on Brake fluid
- 0.22% fail on Rigid brake pipes
-
0.22% fail on
ABS / EBS / ESC
- 0.22% fail on Anti-lock braking system
-
2.6% fail on
Mechanical brake components
-
2.6% fail on
Lamps, reflectors and electrical equipment
-
1.3% fail on
Headlamp aim
- 1.3% fail on Headlamp aim
- 0.22% fail on Headlamp aim not tested
-
0.65% fail on
Headlamps
- 0.65% fail on Headlamp
- 0.65% fail on Registration plate lamp(s)
-
0.22% fail on
Position lamps
- 0.22% fail on Position lamp
- 0.22% fail on Stop lamp
-
0.22% fail on
Front and rear fog lamps
-
0.22% fail on
Rear fog lamp
- 0.22% fail on Rear fog lamp
-
0.22% fail on
Rear fog lamp
-
1.3% fail on
Headlamp aim
-
1.3% fail on
Tyres
(62% better than other 2017 cars)
- 0.87% fail on Condition
- 0.43% fail on Tread depth
-
0.65% fail on
Noise, emissions and leaks
-
0.65% fail on
Exhaust emissions
-
0.43% fail on
Spark ignition
- 0.43% fail on Catalyst emissions
-
0.22% fail on
Compression ignition
- 0.22% fail on On or after 01/01/2014
-
0.43% fail on
Spark ignition
-
0.65% fail on
Exhaust emissions
-
0.43% fail on
Suspension
-
0.43% fail on
Anti-roll bars
- 0.22% fail on Attachment bracket and mounting
- 0.22% fail on Linkage ball joints
-
0.22% fail on
Suspension arms
- 0.22% fail on Pins and bushes
- 0.22% fail on Component mounting prescribed areas
-
0.43% fail on
Anti-roll bars
-
0.43% fail on
Seat belts and supplementary restraint systems
-
0.43% fail on
Seat belts
- 0.22% fail on Requirements
- 0.22% fail on Condition
-
0.43% fail on
Seat belts
-
0.22% fail on
Identification of the vehicle
- 0.22% fail on Registration plates
-
0.22% fail on
Steering
-
0.22% fail on
Steering linkage components
- 0.22% fail on Track rod end
-
0.22% fail on
Steering linkage components
-
0.22% fail on
Body, chassis, structure
- 0.22% fail on Exhaust system
-
0.22% fail on
Road Wheels
- 0.22% fail on Attachment