Toyota Land Cruiser MOT Results
Registered in 199173.1% pass rate
from 67 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 cars and highlighted areas where the Toyota Land Cruiser is unusually good or bad.
-
13% fail on
Lamps, reflectors and electrical equipment
- 4.5% fail on Stop lamp
-
4.5% fail on
Direction indicators
-
4.5% fail on
Flashing type
- 3.0% fail on Individual direction indicators
- 1.5% fail on Side repeaters
-
4.5% fail on
Flashing type
-
3.0% fail on
Headlamps
- 3.0% fail on Headlamp
-
3.0% fail on
Headlamp aim
- 3.0% fail on Headlamp aim
-
3.0% fail on
Front and rear fog lamps
-
3.0% fail on
Rear fog lamp
- 3.0% fail on Rear fog lamp
-
3.0% fail on
Rear fog lamp
- 1.5% fail on Registration plate lamp(s)
-
1.5% fail on
Electrical equipment
- 1.5% fail on Trailer electrical socket
- 1.5% fail on Electrical wiring
- 1.5% fail on Horn
-
10% fail on
Brakes
-
6.0% fail on
Brake performance
-
6.0% fail on
Parking brake efficiency (sp)
- 4.5% fail on Rbt (sp)
- 1.5% fail on Decelerometer (sp)
-
3.0% fail on
Service Brake Efficiency (sp)
-
3.0% fail on
Rbt (sp)
- 1.5% fail on Service brake performance
- 1.5% fail on Service brake imbalance
-
3.0% fail on
Rbt (sp)
-
3.0% fail on
Parking brake performance
-
3.0% fail on
Rbt
- 3.0% fail on Parking brake performance
-
3.0% fail on
Rbt
-
6.0% fail on
Parking brake efficiency (sp)
-
4.5% fail on
Service brake pedal or hand lever
(9 times worse than other 1991 cars)
- 3.0% fail on Hand lever (22 times worse than other 1991 cars)
- 1.5% fail on Pedal
-
4.5% fail on
Mechanical brake components
-
3.0% fail on
Brake cables, rods, levers and linkages
(16 times worse than other 1991 cars)
- 1.5% fail on Linkage
- 1.5% fail on Clevis joint
-
1.5% fail on
Brake discs and drums
- 1.5% fail on Brake discs
-
3.0% fail on
Brake cables, rods, levers and linkages
(16 times worse than other 1991 cars)
-
1.5% fail on
Parking brake control
- 1.5% fail on Lever
-
1.5% fail on
Hydraulic systems
- 1.5% fail on Reservoirs
-
6.0% fail on
Brake performance
-
10% fail on
Suspension
- 3.0% fail on Wheel bearings
- 3.0% fail on Component mounting prescribed areas
-
1.5% fail on
Axles
- 1.5% fail on Swivel joints/housing
-
1.5% fail on
Springs
- 1.5% fail on Spring mounting prescribed areas
- 1.5% fail on Shock absorbers
-
1.5% fail on
Suspension arms
- 1.5% fail on Pins and bushes
-
1.5% fail on
Anti-roll bars
- 1.5% fail on Pins and bushes
-
9.0% fail on
Body, chassis, structure
- 4.5% fail on Exhaust system
-
3.0% fail on
Integral vehicle structure
- 3.0% fail on Integral vehicle structure condition
-
1.5% fail on
Chassis
- 1.5% fail on Chassis condition
-
1.5% fail on
Body
- 1.5% fail on Mounting fixings
-
6.0% fail on
Visibility
- 3.0% fail on Wipers
- 1.5% fail on Driver's view
- 1.5% fail on Washers
-
6.0% fail on
Noise, emissions and leaks
-
6.0% fail on
Exhaust emissions
-
6.0% fail on
Compression ignition
(13 times worse than other 1991 cars)
- 3.0% fail on Pre 01/07/2008 Turbo (16 times worse than other 1991 cars)
- 3.0% fail on Emissions not tested (18 times worse than other 1991 cars)
-
6.0% fail on
Compression ignition
(13 times worse than other 1991 cars)
-
1.5% fail on
Fluid leaks
- 1.5% fail on Transmission oil leaks
-
6.0% fail on
Exhaust emissions
-
3.0% fail on
Seat belts and supplementary restraint systems
-
3.0% fail on
Seat belts
- 3.0% fail on Prescribed areas
-
3.0% fail on
Seat belts
-
1.5% fail on
Road Wheels
- 1.5% fail on Attachment