Toyota Granvia MOT Results
Registered in 201173.9% pass rate
from 111 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2011 cars and highlighted areas where the Toyota Granvia is unusually good or bad.
-
11% fail on
Lamps, reflectors and electrical equipment
-
4.5% fail on
Headlamp aim
- 3.6% fail on Headlamp aim
- 0.90% fail on Headlamp aim not tested
-
3.6% fail on
Front and rear fog lamps
(6 times worse than other 2011 cars)
-
3.6% fail on
Rear fog lamp
(6 times worse than other 2011 cars)
- 3.6% fail on Rear fog lamp (7 times worse than other 2011 cars)
-
3.6% fail on
Rear fog lamp
(6 times worse than other 2011 cars)
- 2.7% fail on Stop lamp
-
2.7% fail on
Electrical equipment
(8 times worse than other 2011 cars)
- 1.8% fail on Horn (10 times worse than other 2011 cars)
- 0.90% fail on Electrical wiring
-
0.90% fail on
Headlamps
- 0.90% fail on Headlamp
-
0.90% fail on
Direction indicators
-
0.90% fail on
Flashing type
- 0.90% fail on Side repeaters
-
0.90% fail on
Flashing type
- 0.90% fail on Registration plate lamp(s)
-
4.5% fail on
Headlamp aim
-
7.2% fail on
Visibility
- 6.3% fail on Wipers (170% worse than other 2011 cars)
- 1.8% fail on Washers
-
6.3% fail on
Brakes
- 1.8% fail on Rigid brake pipes
-
1.8% fail on
Mechanical brake components
-
1.8% fail on
Brake linings and pads
- 1.8% fail on Brake pads
-
1.8% fail on
Brake linings and pads
-
1.8% fail on
Brake performance
-
0.90% fail on
Service brake performance
-
0.90% fail on
Rbt
- 0.90% fail on Service brake performance
-
0.90% fail on
Rbt
-
0.90% fail on
Service Brake Efficiency (sp)
-
0.90% fail on
Rbt (sp)
- 0.90% fail on Service brake imbalance
-
0.90% fail on
Rbt (sp)
-
0.90% fail on
Service brake performance
- 0.90% fail on Load sensing valves
-
4.5% fail on
Body, chassis, structure
- 3.6% fail on Exhaust system
-
0.90% fail on
Transmission
-
0.90% fail on
Drive shafts
- 0.90% fail on Joints
-
0.90% fail on
Drive shafts
-
2.7% fail on
Suspension
(76% better than other 2011 cars)
-
1.8% fail on
Anti-roll bars
- 0.90% fail on Linkage pins and bushes
- 0.90% fail on Linkage ball joints
- 0.90% fail on Shock absorbers
-
1.8% fail on
Anti-roll bars
-
1.8% fail on
Noise, emissions and leaks
-
1.8% fail on
Exhaust emissions
-
1.8% fail on
Spark ignition
- 1.8% fail on Catalyst emissions
-
1.8% fail on
Spark ignition
-
1.8% fail on
Exhaust emissions
-
1.8% fail on
Tyres
- 1.8% fail on Tread depth
- 0.90% fail on Condition
-
0.90% fail on
Identification of the vehicle
- 0.90% fail on Registration plates
-
0.90% fail on
Steering
-
0.90% fail on
Steering linkage components
- 0.90% fail on Track rod end
-
0.90% fail on
Steering linkage components
-
0.90% fail on
Seat belts and supplementary restraint systems
-
0.90% fail on
Seat belts
- 0.90% fail on Condition
-
0.90% fail on
Seat belts