Toyota Granvia MOT Results
Registered in 201066.1% pass rate
from 121 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Toyota Granvia is unusually good or bad.
-
17% fail on
Lamps, reflectors and electrical equipment
-
8.3% fail on
Front and rear fog lamps
(13 times worse than other 2010 cars)
-
8.3% fail on
Rear fog lamp
(13 times worse than other 2010 cars)
- 8.3% fail on Rear fog lamp (13 times worse than other 2010 cars)
-
8.3% fail on
Rear fog lamp
(13 times worse than other 2010 cars)
-
2.5% fail on
Headlamps
- 2.5% fail on Headlamp
- 2.5% fail on Stop lamp
-
2.5% fail on
Direction indicators
-
2.5% fail on
Flashing type
- 1.7% fail on Individual direction indicators
- 0.83% fail on Side repeaters
-
2.5% fail on
Flashing type
-
1.7% fail on
Position lamps
(13 times worse than other 2010 cars)
- 1.7% fail on Position lamp (14 times worse than other 2010 cars)
-
0.83% fail on
Headlamp aim
- 0.83% fail on Headlamp aim
-
0.83% fail on
Electrical equipment
- 0.83% fail on Horn
-
8.3% fail on
Front and rear fog lamps
(13 times worse than other 2010 cars)
-
11% fail on
Visibility
- 6.6% fail on Wipers (160% worse than other 2010 cars)
- 5.0% fail on Washers
-
9.1% fail on
Suspension
-
4.1% fail on
Suspension arms
- 3.3% fail on Ball joint
- 0.83% fail on Pins and bushes
- 2.5% fail on Shock absorbers
-
2.5% fail on
Anti-roll bars
- 1.7% fail on Linkage (5 times worse than other 2010 cars)
- 0.83% fail on Pins and bushes
- 0.83% fail on Linkage pins and bushes
- 0.83% fail on Component mounting prescribed areas
-
4.1% fail on
Suspension arms
-
8.3% fail on
Brakes
-
3.3% fail on
Mechanical brake components
-
2.5% fail on
Brake linings and pads
- 2.5% fail on Brake pads
-
0.83% fail on
Brake discs and drums
- 0.83% fail on Brake discs
-
2.5% fail on
Brake linings and pads
-
3.3% fail on
Brake performance
-
2.5% fail on
Service brake performance
-
2.5% fail on
Rbt
- 1.7% fail on Service brake imbalance
- 0.83% fail on Service brake performance
-
2.5% fail on
Rbt
-
0.83% fail on
Service Brake Efficiency (sp)
- 0.83% fail on Decelerometer (sp)
-
2.5% fail on
Service brake performance
- 2.5% fail on Rigid brake pipes
-
0.83% fail on
Hydraulic systems
- 0.83% fail on Brake fluid
-
3.3% fail on
Mechanical brake components
-
6.6% fail on
Body, chassis, structure
- 5.0% fail on Exhaust system (190% worse than other 2010 cars)
-
0.83% fail on
Spare wheel
- 0.83% fail on Carrier
-
0.83% fail on
Transmission
-
0.83% fail on
Drive shafts
- 0.83% fail on Joints
-
0.83% fail on
Drive shafts
-
4.1% fail on
Noise, emissions and leaks
-
4.1% fail on
Exhaust emissions
-
2.5% fail on
Compression ignition
- 1.7% fail on Emissions not tested (13 times worse than other 2010 cars)
- 0.83% fail on Pre 01/07/2008 Turbo
-
1.7% fail on
Spark ignition
- 1.7% fail on Catalyst emissions
-
2.5% fail on
Compression ignition
-
0.83% fail on
Fluid leaks
- 0.83% fail on Other leaks
-
4.1% fail on
Exhaust emissions
-
2.5% fail on
Tyres
- 2.5% fail on Condition
- 0.83% fail on Tread depth
-
1.7% fail on
Seat belts and supplementary restraint systems
-
1.7% fail on
Seat belts
- 0.83% fail on Requirements
- 0.83% fail on Condition
-
1.7% fail on
Seat belts
-
0.83% fail on
Steering
-
0.83% fail on
Steering linkage components
- 0.83% fail on Drag link end
-
0.83% fail on
Steering linkage components