Toyota Corolla MOT Results
Registered in 201070.4% pass rate
from 125 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Toyota Corolla is unusually good or bad.
-
8.8% fail on
Visibility
- 8.0% fail on Wipers (2 times worse than other 2010 cars)
- 0.80% fail on Washers
-
8.8% fail on
Lamps, reflectors and electrical equipment
-
3.2% fail on
Headlamps
- 3.2% fail on Headlamp
-
3.2% fail on
Headlamp aim
- 3.2% fail on Headlamp aim
-
1.6% fail on
Direction indicators
-
1.6% fail on
Flashing type
- 0.80% fail on Individual direction indicators
- 0.80% fail on Side repeaters
-
1.6% fail on
Flashing type
- 0.80% fail on Registration plate lamp(s)
-
3.2% fail on
Headlamps
-
4.8% fail on
Tyres
- 3.2% fail on Condition
- 1.6% fail on Tread depth
-
4.0% fail on
Brakes
-
2.4% fail on
Brake performance
-
2.4% fail on
Parking brake efficiency (sp)
- 2.4% fail on Rbt (sp)
-
1.6% fail on
Parking brake performance
-
1.6% fail on
Rbt
- 1.6% fail on Parking brake performance
-
1.6% fail on
Rbt
-
2.4% fail on
Parking brake efficiency (sp)
-
1.6% fail on
Mechanical brake components
-
0.80% fail on
Brake linings and pads
- 0.80% fail on Brake pads
-
0.80% fail on
Brake discs and drums
- 0.80% fail on Brake discs
-
0.80% fail on
Brake linings and pads
-
0.80% fail on
Service brake pedal or hand lever
- 0.80% fail on Hand lever
- 0.80% fail on Rigid brake pipes
-
2.4% fail on
Brake performance
-
4.0% fail on
Suspension
(70% better than other 2010 cars)
-
2.4% fail on
Suspension arms
- 2.4% fail on Ball joint
- 0.80% fail on Pins and bushes
-
1.6% fail on
Springs
-
1.6% fail on
Coil springs
- 1.6% fail on Coil spring
-
1.6% fail on
Coil springs
- 0.80% fail on Wheel bearings
-
2.4% fail on
Suspension arms
-
1.6% fail on
Noise, emissions and leaks
-
1.6% fail on
Exhaust emissions
-
1.6% fail on
Spark ignition
- 0.80% fail on Catalyst emissions
- 0.80% fail on Malfunction indicator lamp
-
1.6% fail on
Spark ignition
-
1.6% fail on
Exhaust emissions
-
0.80% fail on
Identification of the vehicle
- 0.80% fail on Registration plates
-
0.80% fail on
Body, chassis, structure
-
0.80% fail on
Fuel system
- 0.80% fail on Fuel cap/sealing device
-
0.80% fail on
Fuel system
-
0.80% fail on
Seat belts and supplementary restraint systems
- 0.80% fail on SRS malfunction indicator lamp