Toyota Corolla MOT Results
Registered in 199367.7% pass rate
from 341 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Toyota Corolla is unusually good or bad.
-
11% fail on
Lamps, reflectors and electrical equipment
- 2.3% fail on Stop lamp
-
2.1% fail on
Headlamp aim
- 2.1% fail on Headlamp aim
- 2.1% fail on Registration plate lamp(s)
-
1.8% fail on
Headlamps
- 1.2% fail on Headlamp
- 0.59% fail on Headlamp levelling device
-
1.5% fail on
Direction indicators
-
1.5% fail on
Flashing type
- 1.5% fail on Individual direction indicators
-
1.5% fail on
Flashing type
-
1.2% fail on
Electrical equipment
- 0.88% fail on Battery(ies)
- 0.29% fail on Electrical wiring
-
0.59% fail on
Position lamps
- 0.59% fail on Position lamp
-
0.59% fail on
Front and rear fog lamps
-
0.59% fail on
Rear fog lamp
- 0.59% fail on Rear fog lamp
-
0.59% fail on
Rear fog lamp
-
10.0% fail on
Suspension
- 5.6% fail on Component mounting prescribed areas
-
3.8% fail on
Anti-roll bars
(180% worse than other 1993 cars)
- 1.5% fail on Ball joint (17 times worse than other 1993 cars)
- 0.88% fail on Attachment bracket and mounting (7 times worse than other 1993 cars)
- 0.88% fail on Linkage ball joints
- 0.59% fail on Pins and bushes
- 0.29% fail on Linkage ball joint dust cover
-
1.2% fail on
Suspension arms
- 0.59% fail on Pins and bushes
- 0.59% fail on Ball joint
- 0.88% fail on Wheel bearings
-
0.59% fail on
Springs
-
0.59% fail on
Coil springs
- 0.59% fail on Coil spring
-
0.59% fail on
Coil springs
- 0.59% fail on Shock absorbers
-
0.29% fail on
Sub-frames
- 0.29% fail on Sub-frame mounting prescribed areas
-
0.29% fail on
Other suspension component
- 0.29% fail on Other suspension component
-
9.1% fail on
Brakes
-
6.7% fail on
Brake performance
-
4.1% fail on
Service Brake Efficiency (sp)
-
4.1% fail on
Rbt (sp)
- 3.2% fail on Service brake imbalance
- 0.88% fail on Service brake performance
-
4.1% fail on
Rbt (sp)
-
2.1% fail on
Service brake performance
-
2.1% fail on
Rbt
- 1.5% fail on Service brake performance
- 0.59% fail on Service brake imbalance
-
2.1% fail on
Rbt
-
1.8% fail on
Parking brake efficiency (sp)
- 1.8% fail on Rbt (sp)
-
1.2% fail on
Parking brake performance
-
1.2% fail on
Rbt
- 1.2% fail on Parking brake performance
-
1.2% fail on
Rbt
-
4.1% fail on
Service Brake Efficiency (sp)
- 2.1% fail on Rigid brake pipes
-
1.2% fail on
Mechanical brake components
-
0.88% fail on
Brake discs and drums
- 0.88% fail on Brake discs
-
0.29% fail on
Brake linings and pads
- 0.29% fail on Brake pads
-
0.88% fail on
Brake discs and drums
-
0.29% fail on
Service brake pedal or hand lever
- 0.29% fail on Hand lever
- 0.29% fail on Flexible brake hoses
-
0.29% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.29% fail on Hydraulic brake cylinder
-
6.7% fail on
Brake performance
-
8.8% fail on
Body, chassis, structure
-
5.3% fail on
Transmission
(100% worse than other 1993 cars)
-
5.3% fail on
Drive shafts
(140% worse than other 1993 cars)
- 5.3% fail on Joints (140% worse than other 1993 cars)
-
5.3% fail on
Drive shafts
(140% worse than other 1993 cars)
-
1.8% fail on
Integral vehicle structure
- 1.8% fail on Integral vehicle structure condition
- 0.88% fail on Exhaust system (74% better than other 1993 cars)
-
0.59% fail on
Fuel system
- 0.29% fail on Tank
- 0.29% fail on Pipe
-
0.59% fail on
Body
- 0.29% fail on Panel
- 0.29% fail on Other body component
-
0.29% fail on
Engine mounting
- 0.29% fail on Engine mounting condition
-
5.3% fail on
Transmission
(100% worse than other 1993 cars)
-
6.5% fail on
Visibility
- 3.5% fail on Wipers
- 3.2% fail on Washers
-
0.29% fail on
View to rear
- 0.29% fail on Mirrors
-
5.6% fail on
Noise, emissions and leaks
-
5.0% fail on
Exhaust emissions
-
5.0% fail on
Spark ignition
- 4.1% fail on Catalyst emissions
- 0.59% fail on Non catalyst emissions
- 0.29% fail on Emissions not tested
-
0.29% fail on
Compression ignition
- 0.29% fail on On or after 01/07/2008
-
5.0% fail on
Spark ignition
-
0.59% fail on
Fluid leaks
- 0.59% fail on Engine oil leaks
-
5.0% fail on
Exhaust emissions
-
3.5% fail on
Tyres
- 2.6% fail on Tread depth
- 0.88% fail on Condition
- 0.29% fail on Size/type
-
0.88% fail on
Seat belts and supplementary restraint systems
-
0.88% fail on
Seat belts
- 0.59% fail on Condition
- 0.29% fail on Prescribed areas
-
0.88% fail on
Seat belts
-
0.29% fail on
Identification of the vehicle
- 0.29% fail on Registration plates
-
0.29% fail on
Steering
-
0.29% fail on
Power steering
- 0.29% fail on Other components
-
0.29% fail on
Power steering