Toyota Camry MOT Results
Registered in 200275.0% pass rate
from 140 tests in 2021
(47% better than other 2002 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 cars and highlighted areas where the Toyota Camry is unusually good or bad.
-
8.6% fail on
Lamps, reflectors and electrical equipment
(49% better than other 2002 cars)
-
5.7% fail on
Headlamps
- 5.7% fail on Headlamp
- 1.4% fail on Registration plate lamp(s)
-
0.71% fail on
Headlamp aim
- 0.71% fail on Headlamp aim
- 0.71% fail on Stop lamp
-
0.71% fail on
Direction indicators
-
0.71% fail on
Flashing type
- 0.71% fail on Side repeaters
-
0.71% fail on
Flashing type
-
5.7% fail on
Headlamps
-
7.9% fail on
Brakes
-
3.6% fail on
Brake performance
-
2.1% fail on
Service brake performance
-
2.1% fail on
Rbt
- 2.1% fail on Service brake performance
-
2.1% fail on
Rbt
-
0.71% fail on
Service Brake Efficiency (sp)
-
0.71% fail on
Rbt (sp)
- 0.71% fail on Service brake performance
-
0.71% fail on
Rbt (sp)
-
0.71% fail on
Parking brake performance
-
0.71% fail on
Rbt
- 0.71% fail on Parking brake performance
-
0.71% fail on
Rbt
-
0.71% fail on
Parking brake efficiency (sp)
- 0.71% fail on Rbt (sp)
-
2.1% fail on
Service brake performance
-
2.9% fail on
Mechanical brake components
-
1.4% fail on
Brake linings and pads
- 1.4% fail on Brake pads
-
0.71% fail on
Brake discs and drums
- 0.71% fail on Brake discs
-
0.71% fail on
Brake cables, rods, levers and linkages
- 0.71% fail on Cable
-
1.4% fail on
Brake linings and pads
-
0.71% fail on
Service brake pedal or hand lever
- 0.71% fail on Hand lever
-
0.71% fail on
Parking brake control
- 0.71% fail on Lever
- 0.71% fail on Flexible brake hoses
-
3.6% fail on
Brake performance
-
7.9% fail on
Suspension
(53% better than other 2002 cars)
- 2.1% fail on Wheel bearings
-
2.1% fail on
Anti-roll bars
- 1.4% fail on Linkage ball joint dust cover
- 0.71% fail on Linkage ball joints
-
1.4% fail on
Suspension arms
- 0.71% fail on Pins and bushes
- 0.71% fail on Ball joint
-
0.71% fail on
Springs
-
0.71% fail on
Coil springs
- 0.71% fail on Coil spring
-
0.71% fail on
Coil springs
- 0.71% fail on Shock absorbers
-
0.71% fail on
Sub-frames
- 0.71% fail on Sub-frame mounting prescribed areas
- 0.71% fail on Component mounting prescribed areas
-
7.1% fail on
Body, chassis, structure
- 4.3% fail on Exhaust system
-
2.1% fail on
Engine mounting
(23 times worse than other 2002 cars)
- 1.4% fail on Engine mounting condition (20 times worse than other 2002 cars)
- 0.71% fail on Bracket
-
0.71% fail on
Chassis
- 0.71% fail on Chassis condition
-
0.71% fail on
Fuel system
- 0.71% fail on Fuel cap/sealing device
-
4.3% fail on
Noise, emissions and leaks
-
4.3% fail on
Exhaust emissions
-
4.3% fail on
Spark ignition
- 2.9% fail on Catalyst emissions
- 1.4% fail on Malfunction indicator lamp
- 0.71% fail on Emissions not tested
-
4.3% fail on
Spark ignition
-
4.3% fail on
Exhaust emissions
-
3.6% fail on
Tyres
- 2.9% fail on Condition
- 0.71% fail on Size/type
-
2.1% fail on
Visibility
(73% better than other 2002 cars)
- 1.4% fail on Wipers
- 0.71% fail on Washers
-
1.4% fail on
Steering
-
0.71% fail on
Steering linkage components
-
0.71% fail on
Other components
- 0.71% fail on Steering linkage
-
0.71% fail on
Other components
-
0.71% fail on
Power steering
- 0.71% fail on Pipes and hoses
-
0.71% fail on
Steering linkage components
-
0.71% fail on
Identification of the vehicle
- 0.71% fail on Registration plates
-
0.71% fail on
Road Wheels
- 0.71% fail on Attachment