MOT Results

Honest John Good Garage Guide MOT Results » Toyota » Camry » 2001

Toyota Camry MOT Results

Registered in 2001
61.2% pass rate
from 49 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Toyota Camry is unusually good or bad.

  • 12% fail on Brakes
    • 8.2% fail on ABS / EBS / ESC (3 times worse than other 2001 cars)
      • 6.1% fail on Anti-lock braking system
      • 2.0% fail on Electronic stability control
    • 6.1% fail on Mechanical brake components
      • 4.1% fail on Brake linings and pads
        • 4.1% fail on Brake pads
      • 2.0% fail on Brake discs and drums
        • 2.0% fail on Brake discs
    • 2.0% fail on Brake performance
      • 2.0% fail on Parking brake performance
        • 2.0% fail on Rbt
          • 2.0% fail on Parking brake performance
      • 2.0% fail on Parking brake efficiency (sp)
        • 2.0% fail on Rbt (sp)
  • 12% fail on Body, chassis, structure
    • 6.1% fail on Exhaust system
    • 4.1% fail on Integral vehicle structure
      • 4.1% fail on Integral vehicle structure condition
    • 2.0% fail on Chassis
      • 2.0% fail on Chassis condition
  • 12% fail on Noise, emissions and leaks
    • 12% fail on Exhaust emissions
      • 12% fail on Spark ignition
        • 10% fail on Malfunction indicator lamp (3 times worse than other 2001 cars)
        • 4.1% fail on Catalyst emissions
  • 10% fail on Lamps, reflectors and electrical equipment
    • 4.1% fail on Headlamp aim
      • 4.1% fail on Headlamp aim
    • 2.0% fail on Headlamps
      • 2.0% fail on Headlamp
    • 2.0% fail on Stop lamp
    • 2.0% fail on Front and rear fog lamps
      • 2.0% fail on Rear fog lamp
        • 2.0% fail on Rear fog lamp
    • 2.0% fail on Registration plate lamp(s)
    • 2.0% fail on Electrical equipment
      • 2.0% fail on Battery(ies)
  • 10% fail on Suspension
    • 4.1% fail on Anti-roll bars
      • 2.0% fail on Pins and bushes
      • 2.0% fail on Linkage ball joints
    • 2.0% fail on Wheel bearings
    • 2.0% fail on Sub-frames
      • 2.0% fail on Sub-frame
    • 2.0% fail on Component mounting prescribed areas
  • 4.1% fail on Visibility
    • 4.1% fail on Wipers
    • 2.0% fail on Washers
  • 2.0% fail on Seat belts and supplementary restraint systems
    • 2.0% fail on SRS malfunction indicator lamp

Search Good Garages