Toyota Camry MOT Results

Registered in 1997

64.6% pass rate

from 127 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Toyota Camry is unusually good or bad.

12% fail on Body, chassis, structure
- 9.4% fail on Transmission (2 times worse than other 1997 cars)
  - 8.7% fail on Drive shafts (2 times worse than other 1997 cars)
    - 8.7% fail on Joints (2 times worse than other 1997 cars)
  - 1.6% fail on Prop shafts
    - 1.6% fail on Joints (5 times worse than other 1997 cars)
- 3.1% fail on Exhaust system
- 1.6% fail on Chassis
  - 1.6% fail on Chassis condition
- 0.79% fail on Doors
  - 0.79% fail on Driver's door
    - 0.79% fail on Door condition
11% fail on Suspension
- 7.1% fail on Anti-roll bars (2 times worse than other 1997 cars)
  - 2.4% fail on Ball joint (14 times worse than other 1997 cars)
  - 2.4% fail on Linkage ball joints
  - 1.6% fail on Linkage pins and bushes
  - 0.79% fail on Attachment bracket and mounting
  - 0.79% fail on Ball joint dust cover
- 2.4% fail on Suspension arms
  - 1.6% fail on Pins and bushes
  - 0.79% fail on Attachment bracket and mounting
- 1.6% fail on Component mounting prescribed areas
- 0.79% fail on Wheel bearings
- 0.79% fail on Shock absorbers
9.4% fail on Brakes
- 6.3% fail on Brake performance
  - 4.7% fail on Service brake performance
    - 4.7% fail on Rbt
      - 4.7% fail on Service brake performance
  - 2.4% fail on Parking brake efficiency (sp)
    - 2.4% fail on Rbt (sp)
  - 1.6% fail on Parking brake performance
    - 1.6% fail on Rbt
      - 1.6% fail on Parking brake performance
  - 0.79% fail on Brake performance not tested
  - 0.79% fail on Service Brake Efficiency (sp)
    - 0.79% fail on Rbt (sp)
      - 0.79% fail on Service brake imbalance
- 3.1% fail on Mechanical brake components
  - 1.6% fail on Brake linings and pads
    - 1.6% fail on Brake pads
  - 1.6% fail on Brake discs and drums
    - 1.6% fail on Brake discs
- 1.6% fail on ABS / EBS / ESC
  - 1.6% fail on Anti-lock braking system
- 0.79% fail on Service brake pedal or hand lever
  - 0.79% fail on Hand lever
- 0.79% fail on Rigid brake pipes
9.4% fail on Lamps, reflectors and electrical equipment
- 2.4% fail on Headlamps
  - 2.4% fail on Headlamp
- 2.4% fail on Headlamp aim
  - 2.4% fail on Headlamp aim
- 2.4% fail on Stop lamp
- 2.4% fail on Registration plate lamp(s)
- 1.6% fail on Direction indicators
  - 1.6% fail on Flashing type
    - 0.79% fail on All direction indicators
    - 0.79% fail on Individual direction indicators
- 0.79% fail on Front and rear fog lamps
  - 0.79% fail on Rear fog lamp
    - 0.79% fail on Rear fog lamp
7.9% fail on Noise, emissions and leaks
- 7.9% fail on Exhaust emissions
  - 7.1% fail on Spark ignition
    - 4.7% fail on Catalyst emissions
    - 2.4% fail on Emissions not tested
    - 0.79% fail on Emission control equipment
      - 0.79% fail on Catalytic converter
  - 0.79% fail on Compression ignition
    - 0.79% fail on Pre 01/07/2008 Turbo
- 0.79% fail on Fluid leaks
  - 0.79% fail on Engine oil leaks
2.4% fail on Identification of the vehicle
- 2.4% fail on Registration plates
2.4% fail on Visibility
- 1.6% fail on Wipers
- 1.6% fail on Washers
2.4% fail on Tyres
- 2.4% fail on Tread depth
1.6% fail on Speedometer and speed limiter (36 times worse than other 1997 cars)
- 1.6% fail on Speedometer (36 times worse than other 1997 cars)
0.79% fail on Seat belts and supplementary restraint systems
- 0.79% fail on Seat belts
  - 0.79% fail on Prescribed areas