Toyota Auris MOT Results
Registered in 200657.5% pass rate
from 73 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Toyota Auris is unusually good or bad.
-
15% fail on
Brakes
-
6.8% fail on
Brake performance
-
5.5% fail on
Service brake performance
-
5.5% fail on
Rbt
- 2.7% fail on Service brake performance
- 2.7% fail on Service brake imbalance
-
5.5% fail on
Rbt
-
1.4% fail on
Parking brake efficiency (sp)
- 1.4% fail on Rbt (sp)
-
5.5% fail on
Service brake performance
-
4.1% fail on
Mechanical brake components
-
2.7% fail on
Brake linings and pads
- 2.7% fail on Brake pads
-
1.4% fail on
Brake discs and drums
- 1.4% fail on Brake discs
-
2.7% fail on
Brake linings and pads
- 2.7% fail on Rigid brake pipes
-
1.4% fail on
Hydraulic systems
- 1.4% fail on Reservoirs
-
6.8% fail on
Brake performance
-
12% fail on
Lamps, reflectors and electrical equipment
-
5.5% fail on
Headlamps
- 5.5% fail on Headlamp
- 4.1% fail on Stop lamp
-
2.7% fail on
Headlamp aim
- 2.7% fail on Headlamp aim
- 1.4% fail on Registration plate lamp(s)
-
5.5% fail on
Headlamps
-
8.2% fail on
Noise, emissions and leaks
-
6.8% fail on
Exhaust emissions
-
4.1% fail on
Spark ignition
- 2.7% fail on Catalyst emissions
- 2.7% fail on Emissions not tested
- 1.4% fail on Malfunction indicator lamp
-
2.7% fail on
Compression ignition
- 2.7% fail on Pre 01/07/2008 Turbo
-
4.1% fail on
Spark ignition
-
1.4% fail on
Noise suppression
- 1.4% fail on Undertray
-
6.8% fail on
Exhaust emissions
-
5.5% fail on
Visibility
- 2.7% fail on Wipers
- 2.7% fail on Washers
-
5.5% fail on
Suspension
(67% better than other 2006 cars)
-
2.7% fail on
Suspension arms
- 2.7% fail on Pins and bushes
- 1.4% fail on Ball joint dust cover
-
1.4% fail on
Anti-roll bars
- 1.4% fail on Linkage ball joints
-
1.4% fail on
Other suspension component
- 1.4% fail on Ball joint
-
2.7% fail on
Suspension arms
-
4.1% fail on
Tyres
- 2.7% fail on Tread depth
- 1.4% fail on Condition
-
2.7% fail on
Steering
-
1.4% fail on
Steering gear
- 1.4% fail on Steering rack
-
1.4% fail on
Steering linkage components
- 1.4% fail on Track rod end
-
1.4% fail on
Steering gear
-
2.7% fail on
Body, chassis, structure
- 1.4% fail on Exhaust system
-
1.4% fail on
Fuel system
- 1.4% fail on Tank
- 1.4% fail on Pipe
-
1.4% fail on
Seat belts and supplementary restraint systems
-
1.4% fail on
Seat belts
- 1.4% fail on Prescribed areas
-
1.4% fail on
Seat belts