Suzuki Vitara MOT Results
Registered in 200158.6% pass rate
from 99 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Suzuki Vitara is unusually good or bad.
-
18% fail on
Body, chassis, structure
(86% worse than other 2001 cars)
-
11% fail on
Transmission
(2 times worse than other 2001 cars)
-
9.1% fail on
Drive shafts
(190% worse than other 2001 cars)
- 9.1% fail on Joints (190% worse than other 2001 cars)
-
2.0% fail on
Prop shafts
(10 times worse than other 2001 cars)
- 2.0% fail on Joints (13 times worse than other 2001 cars)
-
9.1% fail on
Drive shafts
(190% worse than other 2001 cars)
-
2.0% fail on
Integral vehicle structure
- 2.0% fail on Integral vehicle structure condition
- 2.0% fail on Exhaust system
-
1.0% fail on
Chassis
- 1.0% fail on Chassis condition
-
1.0% fail on
Fuel system
- 1.0% fail on Fuel cap/sealing device
-
1.0% fail on
Body
- 1.0% fail on Mounting fixings
-
1.0% fail on
Seats
- 1.0% fail on Driver's seat
-
11% fail on
Transmission
(2 times worse than other 2001 cars)
-
11% fail on
Lamps, reflectors and electrical equipment
- 4.0% fail on Stop lamp
-
2.0% fail on
Headlamps
- 1.0% fail on Headlamp
- 1.0% fail on Headlamp levelling device
-
2.0% fail on
Headlamp aim
- 2.0% fail on Headlamp aim
-
1.0% fail on
Direction indicators
-
1.0% fail on
Flashing type
- 1.0% fail on Side repeaters
-
1.0% fail on
Flashing type
-
1.0% fail on
Hazard warning
- 1.0% fail on Switch
-
1.0% fail on
Front and rear fog lamps
-
1.0% fail on
Rear fog lamp
- 1.0% fail on Rear fog lamp
-
1.0% fail on
Rear fog lamp
-
1.0% fail on
Electrical equipment
- 1.0% fail on Battery(ies)
-
10% fail on
Brakes
-
7.1% fail on
Brake performance
-
5.1% fail on
Service brake performance
-
4.0% fail on
Rbt
- 4.0% fail on Service brake performance
- 1.0% fail on Service brake imbalance
-
1.0% fail on
Plate brake tester
- 1.0% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
4.0% fail on
Rbt
-
3.0% fail on
Service Brake Efficiency (sp)
-
3.0% fail on
Rbt (sp)
- 3.0% fail on Service brake imbalance
- 1.0% fail on Service brake performance
-
3.0% fail on
Rbt (sp)
-
2.0% fail on
Parking brake efficiency (sp)
- 1.0% fail on Rbt (sp)
- 1.0% fail on Decelerometer (sp)
-
1.0% fail on
Parking brake performance
-
1.0% fail on
Plate brake tester
- 1.0% fail on Parking brake performance
-
1.0% fail on
Plate brake tester
-
5.1% fail on
Service brake performance
-
2.0% fail on
Mechanical brake components
-
1.0% fail on
Brake linings and pads
- 1.0% fail on Brake pads
-
1.0% fail on
Brake discs and drums
- 1.0% fail on Brake discs
-
1.0% fail on
Brake linings and pads
- 1.0% fail on Flexible brake hoses
-
7.1% fail on
Brake performance
-
9.1% fail on
Noise, emissions and leaks
-
9.1% fail on
Exhaust emissions
-
7.1% fail on
Spark ignition
- 3.0% fail on Catalyst emissions
- 3.0% fail on Malfunction indicator lamp
- 1.0% fail on Emissions not tested
-
2.0% fail on
Compression ignition
- 1.0% fail on Malfunction indicator lamp
- 1.0% fail on Emissions not tested
-
7.1% fail on
Spark ignition
-
9.1% fail on
Exhaust emissions
-
8.1% fail on
Seat belts and supplementary restraint systems
-
8.1% fail on
Seat belts
(2 times worse than other 2001 cars)
- 7.1% fail on Prescribed areas (3 times worse than other 2001 cars)
- 3.0% fail on Condition (4 times worse than other 2001 cars)
-
8.1% fail on
Seat belts
(2 times worse than other 2001 cars)
-
6.1% fail on
Visibility
- 4.0% fail on Wipers
-
1.0% fail on
Condition of glass
- 1.0% fail on Windscreen
- 1.0% fail on Washers
-
4.0% fail on
Steering
-
4.0% fail on
Steering linkage components
- 4.0% fail on Track rod end
-
4.0% fail on
Steering linkage components
-
4.0% fail on
Suspension
(75% better than other 2001 cars)
-
2.0% fail on
Suspension arms
- 1.0% fail on Pins and bushes
- 1.0% fail on Ball joint
- 1.0% fail on Wheel bearings
-
1.0% fail on
Anti-roll bars
- 1.0% fail on Linkage ball joint dust cover
- 1.0% fail on Component mounting prescribed areas
-
2.0% fail on
Suspension arms
-
4.0% fail on
Tyres
- 4.0% fail on Tread depth
-
1.0% fail on
Identification of the vehicle
- 1.0% fail on Registration plates
-
1.0% fail on
Road Wheels
- 1.0% fail on Attachment