Suzuki Jimny MOT Results
Registered in 198669.3% pass rate
from 88 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1986 cars and highlighted areas where the Suzuki Jimny is unusually good or bad.
-
19% fail on
Lamps, Reflectors and Electrical Equipment
-
15% fail on
Rear fog lamp
(190% worse than other 1986 cars)
- 13% fail on Fog lamp (170% worse than other 1986 cars)
- 4.5% fail on Tell tale (2 times worse than other 1986 cars)
- 5.7% fail on Horn
-
4.5% fail on
Position lamps
- 3.4% fail on Front lamps
- 1.1% fail on Rear lamps
-
4.5% fail on
Headlamps
- 3.4% fail on Headlamp
-
1.1% fail on
Headlamp defects which do require an aim check on retest
- 1.1% fail on Main beam 'tell-tale'
- 3.4% fail on Battery
- 3.4% fail on Registration plate lamp
- 2.3% fail on Headlamp aim
-
1.1% fail on
Direction indicators
-
1.1% fail on
Flashing type
- 1.1% fail on Side repeaters
-
1.1% fail on
Flashing type
-
15% fail on
Rear fog lamp
(190% worse than other 1986 cars)
-
9.1% fail on
Brakes
-
5.7% fail on
Brake performance
- 2.3% fail on Parking brake performance
- 1.1% fail on Brake imbalance
- 1.1% fail on Front wheels
- 1.1% fail on Rear wheels
- 1.1% fail on Service brake performance
-
2.3% fail on
Parking brake
- 2.3% fail on Condition
-
2.3% fail on
Hydraulic systems
-
2.3% fail on
Components
- 1.1% fail on Pipes
- 1.1% fail on Hoses
-
2.3% fail on
Components
-
1.1% fail on
Service brake control components
-
1.1% fail on
Pedal
- 1.1% fail on Condition
-
1.1% fail on
Pedal
-
1.1% fail on
Hub components
- 1.1% fail on Brake pads
-
1.1% fail on
Prescribed areas
- 1.1% fail on Master cylinder/servo mounting
-
5.7% fail on
Brake performance
-
9.1% fail on
Driver's view of the road
- 5.7% fail on Washers
- 4.5% fail on Wipers
-
4.5% fail on
Suspension
-
2.3% fail on
Prescribed areas
- 2.3% fail on Component mounting
-
1.1% fail on
Axles
- 1.1% fail on Swivel joints/housing
-
1.1% fail on
Wheel bearings
- 1.1% fail on Front
-
2.3% fail on
Prescribed areas
-
3.4% fail on
Body, Structure and General Items
- 2.3% fail on Body condition
-
1.1% fail on
Seats
- 1.1% fail on Drivers
-
3.4% fail on
Exhaust, Fuel and Emissions
- 3.4% fail on Emissions
-
2.3% fail on
Seat Belts and Supplementary Restraint Systems
-
2.3% fail on
Seat belts
- 1.1% fail on Condition
- 1.1% fail on Prescribed areas
-
2.3% fail on
Seat belts
-
2.3% fail on
Registration plates and VIN
- 2.3% fail on Registration plate