Suzuki Cappuccino MOT Results

Registered in 1994
73.1% pass rate
from 145 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the Suzuki Cappuccino is unusually good or bad.

  • 11% fail on Suspension
    • 9.7% fail on Component mounting prescribed areas
    • 2.1% fail on Springs
      • 2.1% fail on Coil springs
        • 2.1% fail on Coil spring
    • 1.4% fail on Sub-frames
      • 1.4% fail on Sub-frame mounting prescribed areas
    • 0.69% fail on Shock absorbers
    • 0.69% fail on Anti-roll bars
      • 0.69% fail on Linkage pins and bushes
  • 10% fail on Lamps, reflectors and electrical equipment
    • 3.4% fail on Front and rear fog lamps
      • 3.4% fail on Rear fog lamp
        • 3.4% fail on Rear fog lamp
    • 2.8% fail on Headlamp aim
      • 2.8% fail on Headlamp aim
    • 2.8% fail on Stop lamp
    • 2.1% fail on Headlamps
      • 2.1% fail on Headlamp
    • 1.4% fail on Direction indicators
      • 1.4% fail on Flashing type
        • 1.4% fail on Individual direction indicators
    • 1.4% fail on Registration plate lamp(s)
    • 0.69% fail on Position lamps
      • 0.69% fail on Position lamp
    • 0.69% fail on Mandatory tell-tales
      • 0.69% fail on Main beam tell-tale
  • 9.0% fail on Brakes
    • 5.5% fail on Brake performance
      • 4.1% fail on Service Brake Efficiency (sp)
        • 3.4% fail on Rbt (sp)
          • 3.4% fail on Service brake performance
          • 0.69% fail on Service brake imbalance
        • 0.69% fail on Plate brake tester (sp)
          • 0.69% fail on Service brake imbalance
      • 3.4% fail on Parking brake efficiency (sp)
        • 2.8% fail on Rbt (sp)
        • 0.69% fail on Plate brake tester (sp)
      • 1.4% fail on Service brake performance
        • 1.4% fail on Rbt
          • 1.4% fail on Service brake performance
      • 0.69% fail on Parking brake performance
        • 0.69% fail on Rbt
          • 0.69% fail on Parking brake performance
          • 0.69% fail on Parking brake efficiency (Trikes, quads and pre-68 vehicles)
    • 3.4% fail on Rigid brake pipes
    • 2.1% fail on Mechanical brake components
      • 1.4% fail on Brake linings and pads
        • 0.69% fail on Brake linings
        • 0.69% fail on Brake pads
      • 1.4% fail on Brake discs and drums
        • 1.4% fail on Brake discs
    • 0.69% fail on Hydraulic systems
      • 0.69% fail on Master cylinder
    • 0.69% fail on Flexible brake hoses
    • 0.69% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.69% fail on Hydraulic brake callipers
    • 0.69% fail on Other components and prescribed areas
      • 0.69% fail on Prescribed areas
        • 0.69% fail on Master cylinder/servo mounting
  • 7.6% fail on Body, chassis, structure
    • 4.1% fail on Exhaust system
    • 2.8% fail on Chassis
      • 2.8% fail on Chassis condition
    • 0.69% fail on Integral vehicle structure
      • 0.69% fail on Integral vehicle structure condition
    • 0.69% fail on Floor
  • 7.6% fail on Noise, emissions and leaks
    • 6.9% fail on Exhaust emissions
      • 6.9% fail on Spark ignition
        • 5.5% fail on Catalyst emissions
        • 1.4% fail on Emissions not tested
    • 0.69% fail on Fluid leaks
      • 0.69% fail on Engine oil leaks
  • 4.8% fail on Seat belts and supplementary restraint systems
    • 4.8% fail on Seat belts
      • 4.8% fail on Prescribed areas
  • 4.1% fail on Visibility
    • 3.4% fail on Washers
    • 1.4% fail on Wipers
  • 1.4% fail on Tyres
    • 1.4% fail on Condition
    • 0.69% fail on Size/type
  • 0.69% fail on Identification of the vehicle
    • 0.69% fail on Registration plates

Search Good Garages