Suzuki Alto MOT Results
Registered in 200148.5% pass rate
from 68 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2001 cars and highlighted areas where the Suzuki Alto is unusually good or bad.
-
28% fail on
Brakes
(100% worse than other 2001 cars)
-
25% fail on
Brake performance
(2 times worse than other 2001 cars)
-
24% fail on
Service Brake Efficiency (sp)
(9 times worse than other 2001 cars)
-
24% fail on
Rbt (sp)
(9 times worse than other 2001 cars)
- 18% fail on Service brake imbalance (10 times worse than other 2001 cars)
- 8.8% fail on Service brake performance (8 times worse than other 2001 cars)
-
24% fail on
Rbt (sp)
(9 times worse than other 2001 cars)
-
10% fail on
Service brake performance
(2 times worse than other 2001 cars)
-
10% fail on
Rbt
(2 times worse than other 2001 cars)
- 8.8% fail on Service brake performance (2 times worse than other 2001 cars)
- 2.9% fail on Service brake imbalance
-
10% fail on
Rbt
(2 times worse than other 2001 cars)
-
7.4% fail on
Parking brake efficiency (sp)
- 7.4% fail on Rbt (sp)
-
2.9% fail on
Parking brake performance
-
2.9% fail on
Rbt
- 2.9% fail on Parking brake performance
-
2.9% fail on
Rbt
- 1.5% fail on Brake performance not tested
-
24% fail on
Service Brake Efficiency (sp)
(9 times worse than other 2001 cars)
- 7.4% fail on Rigid brake pipes
-
2.9% fail on
Hydraulic systems
(12 times worse than other 2001 cars)
- 1.5% fail on Brake fluid
- 1.5% fail on Valves
-
1.5% fail on
Mechanical brake components
-
1.5% fail on
Brake discs and drums
- 1.5% fail on Brake drums
-
1.5% fail on
Brake discs and drums
-
25% fail on
Brake performance
(2 times worse than other 2001 cars)
-
19% fail on
Suspension
- 15% fail on Component mounting prescribed areas (2 times worse than other 2001 cars)
-
5.9% fail on
Suspension arms
- 2.9% fail on Ball joint
- 2.9% fail on Ball joint dust cover
- 1.5% fail on Suspension arm
- 2.9% fail on Shock absorbers
- 1.5% fail on Wheel bearings
-
1.5% fail on
Sub-frames
- 1.5% fail on Sub-frame mounting prescribed areas
-
15% fail on
Lamps, reflectors and electrical equipment
- 8.8% fail on Stop lamp
-
2.9% fail on
Headlamps
- 2.9% fail on Headlamp
-
2.9% fail on
Headlamp aim
- 2.9% fail on Headlamp aim
-
1.5% fail on
Front and rear fog lamps
-
1.5% fail on
Rear fog lamp
- 1.5% fail on Rear fog lamp
-
1.5% fail on
Rear fog lamp
- 1.5% fail on Registration plate lamp(s)
-
1.5% fail on
Mandatory tell-tales
- 1.5% fail on Main beam tell-tale
-
8.8% fail on
Body, chassis, structure
-
5.9% fail on
Transmission
-
5.9% fail on
Drive shafts
- 5.9% fail on Joints
-
5.9% fail on
Drive shafts
-
1.5% fail on
Integral vehicle structure
- 1.5% fail on Integral vehicle structure condition
- 1.5% fail on Exhaust system
-
5.9% fail on
Transmission
-
7.4% fail on
Visibility
- 4.4% fail on Wipers
- 4.4% fail on Washers
-
1.5% fail on
Condition of glass
- 1.5% fail on Windscreen
-
5.9% fail on
Tyres
- 4.4% fail on Tread depth
- 2.9% fail on Condition
-
4.4% fail on
Noise, emissions and leaks
-
4.4% fail on
Exhaust emissions
-
4.4% fail on
Spark ignition
-
1.5% fail on
Emission control equipment
- 1.5% fail on Oxygen sensor
- 1.5% fail on Catalyst emissions
- 1.5% fail on Emissions not tested
-
1.5% fail on
Emission control equipment
-
4.4% fail on
Spark ignition
-
4.4% fail on
Exhaust emissions
-
2.9% fail on
Identification of the vehicle
- 2.9% fail on Registration plates
-
2.9% fail on
Seat belts and supplementary restraint systems
-
2.9% fail on
Seat belts
- 1.5% fail on Prescribed areas
- 1.5% fail on Condition
-
2.9% fail on
Seat belts
-
1.5% fail on
Steering
-
1.5% fail on
Steering gear
- 1.5% fail on Steering rack
-
1.5% fail on
Steering gear