Subaru Outback MOT Results
Registered in 201270.4% pass rate
from 321 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Subaru Outback is unusually good or bad.
-
12% fail on
Lamps, reflectors and electrical equipment
-
4.0% fail on
Headlamps
- 2.2% fail on Headlamp
- 0.93% fail on Headlamp levelling device (7 times worse than other 2012 cars)
- 0.93% fail on Headlamp cleaning device (15 times worse than other 2012 cars)
-
4.0% fail on
Headlamp aim
- 3.7% fail on Headlamp aim
- 0.31% fail on Headlamp aim not tested
- 3.1% fail on Stop lamp
- 1.6% fail on Registration plate lamp(s)
-
1.2% fail on
Front and rear fog lamps
-
1.2% fail on
Rear fog lamp
- 1.2% fail on Rear fog lamp
-
1.2% fail on
Rear fog lamp
-
4.0% fail on
Headlamps
-
7.5% fail on
Brakes
-
4.7% fail on
Mechanical brake components
-
3.7% fail on
Brake linings and pads
- 3.7% fail on Brake pads
-
1.6% fail on
Brake discs and drums
- 1.6% fail on Brake discs
-
3.7% fail on
Brake linings and pads
-
2.5% fail on
ABS / EBS / ESC
(6 times worse than other 2012 cars)
- 2.5% fail on Electronic stability control (13 times worse than other 2012 cars)
- 0.31% fail on Anti-lock braking system
-
1.2% fail on
Parking brake control
(4 times worse than other 2012 cars)
- 1.2% fail on Electronic parking brake (31 times worse than other 2012 cars)
-
1.2% fail on
Brake performance
-
0.93% fail on
Service brake performance
-
0.93% fail on
Rbt
- 0.93% fail on Service brake performance
-
0.93% fail on
Rbt
- 0.31% fail on Brake performance not tested
-
0.93% fail on
Service brake performance
-
0.31% fail on
Hydraulic systems
- 0.31% fail on Brake fluid
- 0.31% fail on Rigid brake pipes
-
0.31% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.31% fail on Hydraulic brake callipers
-
4.7% fail on
Mechanical brake components
-
7.5% fail on
Suspension
-
5.3% fail on
Suspension arms
- 3.4% fail on Pins and bushes (170% worse than other 2012 cars)
- 2.2% fail on Ball joint
- 0.31% fail on Ball joint dust cover
-
1.9% fail on
Anti-roll bars
- 0.93% fail on Pins and bushes (30 times worse than other 2012 cars)
- 0.62% fail on Linkage ball joints
- 0.31% fail on Linkage ball joint dust cover
- 1.2% fail on Wheel bearings
-
0.31% fail on
Springs
-
0.31% fail on
Coil springs
- 0.31% fail on Coil spring
-
0.31% fail on
Coil springs
- 0.31% fail on Shock absorbers
-
0.31% fail on
Other suspension component
- 0.31% fail on Ball joint
-
5.3% fail on
Suspension arms
-
6.5% fail on
Tyres
- 4.7% fail on Condition
- 1.9% fail on Tread depth
-
4.7% fail on
Visibility
- 3.4% fail on Wipers
-
0.62% fail on
Condition of glass
(7 times worse than other 2012 cars)
- 0.62% fail on Windscreen (7 times worse than other 2012 cars)
- 0.62% fail on Washers
- 0.31% fail on Bonnet
-
4.0% fail on
Noise, emissions and leaks
-
3.7% fail on
Exhaust emissions
-
2.5% fail on
Compression ignition
(2 times worse than other 2012 cars)
- 2.2% fail on Malfunction indicator lamp (4 times worse than other 2012 cars)
- 0.31% fail on Emissions not tested
-
1.6% fail on
Spark ignition
- 1.2% fail on Malfunction indicator lamp
- 0.31% fail on Emissions not tested
-
2.5% fail on
Compression ignition
(2 times worse than other 2012 cars)
-
0.31% fail on
Fluid leaks
- 0.31% fail on Other leaks
-
3.7% fail on
Exhaust emissions
-
0.62% fail on
Body, chassis, structure
- 0.31% fail on Exhaust system
- 0.31% fail on Bumpers