Subaru Justy MOT Results
Registered in 201073.6% pass rate
from 53 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2010 cars and highlighted areas where the Subaru Justy is unusually good or bad.
-
11% fail on
Visibility
- 9.4% fail on Wipers (2 times worse than other 2010 cars)
- 3.8% fail on Washers
-
11% fail on
Suspension
-
3.8% fail on
Suspension arms
- 3.8% fail on Ball joint
- 1.9% fail on Wheel bearings
-
1.9% fail on
Anti-roll bars
- 1.9% fail on Linkage ball joints
-
1.9% fail on
Sub-frames
- 1.9% fail on Pins and bushes
-
1.9% fail on
Other suspension component
- 1.9% fail on Ball joint
- 1.9% fail on Component mounting prescribed areas
-
3.8% fail on
Suspension arms
-
5.7% fail on
Brakes
-
3.8% fail on
Brake performance
-
1.9% fail on
Service Brake Efficiency (sp)
-
1.9% fail on
Rbt (sp)
- 1.9% fail on Service brake imbalance
-
1.9% fail on
Rbt (sp)
-
1.9% fail on
Parking brake efficiency (sp)
- 1.9% fail on Rbt (sp)
-
1.9% fail on
Service Brake Efficiency (sp)
-
1.9% fail on
Service brake pedal or hand lever
- 1.9% fail on Pedal
-
1.9% fail on
Mechanical brake components
-
1.9% fail on
Brake linings and pads
- 1.9% fail on Brake pads
-
1.9% fail on
Brake linings and pads
-
3.8% fail on
Brake performance
-
5.7% fail on
Lamps, reflectors and electrical equipment
-
1.9% fail on
Headlamps
- 1.9% fail on Headlamp
-
1.9% fail on
Headlamp aim
- 1.9% fail on Headlamp aim
- 1.9% fail on Stop lamp
-
1.9% fail on
Electrical equipment
- 1.9% fail on Battery(ies)
-
1.9% fail on
Headlamps
-
5.7% fail on
Body, chassis, structure
-
1.9% fail on
Chassis
- 1.9% fail on Chassis condition
-
1.9% fail on
Transmission
-
1.9% fail on
Drive shafts
- 1.9% fail on Joints
-
1.9% fail on
Drive shafts
-
1.9% fail on
Engine mounting
- 1.9% fail on Bracket
-
1.9% fail on
Chassis
-
3.8% fail on
Tyres
- 3.8% fail on Tread depth
-
1.9% fail on
Steering
-
1.9% fail on
Steering linkage components
- 1.9% fail on Track rod end
-
1.9% fail on
Steering linkage components