SEAT Ibiza MOT Results

Registered in 1998
59.3% pass rate
from 177 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the SEAT Ibiza is unusually good or bad.

  • 18% fail on Brakes
    • 13% fail on Brake performance
      • 6.2% fail on Service Brake Efficiency (sp)
        • 6.2% fail on Rbt (sp)
          • 6.2% fail on Service brake imbalance (2 times worse than other 1998 cars)
      • 5.6% fail on Service brake performance
        • 5.6% fail on Rbt
          • 4.5% fail on Service brake performance
          • 1.1% fail on Service brake imbalance
      • 5.6% fail on Parking brake efficiency (sp)
        • 5.6% fail on Rbt (sp)
      • 0.56% fail on Brake performance not tested
    • 2.3% fail on Mechanical brake components
      • 1.7% fail on Brake discs and drums
        • 1.1% fail on Brake discs
        • 0.56% fail on Brake drums
      • 1.1% fail on Brake linings and pads
        • 1.1% fail on Brake pads
    • 1.1% fail on Hydraulic systems
      • 0.56% fail on Reservoirs
      • 0.56% fail on Brake fluid
    • 1.1% fail on Rigid brake pipes
    • 1.1% fail on Flexible brake hoses
    • 1.1% fail on ABS / EBS / ESC
      • 1.1% fail on Anti-lock braking system
    • 0.56% fail on Service brake pedal or hand lever
      • 0.56% fail on Hand lever
    • 0.56% fail on Parking brake control
      • 0.56% fail on Lever
    • 0.56% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.56% fail on Hydraulic brake cylinder
  • 13% fail on Lamps, reflectors and electrical equipment
    • 5.1% fail on Direction indicators
      • 5.1% fail on Flashing type
        • 4.5% fail on Individual direction indicators (170% worse than other 1998 cars)
        • 0.56% fail on Side repeaters
    • 2.3% fail on Headlamps
      • 1.7% fail on Headlamp
      • 0.56% fail on Matched pair
    • 2.3% fail on Stop lamp
    • 1.7% fail on Headlamp aim
      • 1.7% fail on Headlamp aim
    • 1.7% fail on Position lamps
      • 1.7% fail on Position lamp
    • 1.7% fail on Registration plate lamp(s)
    • 0.56% fail on Front and rear fog lamps
      • 0.56% fail on Rear fog lamp
        • 0.56% fail on Rear fog lamp
    • 0.56% fail on Electrical equipment
      • 0.56% fail on Horn
  • 13% fail on Suspension
    • 3.4% fail on Wheel bearings
    • 3.4% fail on Component mounting prescribed areas
    • 2.8% fail on Suspension arms
      • 2.8% fail on Pins and bushes
    • 1.1% fail on Shock absorbers
    • 1.1% fail on Anti-roll bars
      • 0.56% fail on Linkage pins and bushes
      • 0.56% fail on Linkage ball joints
    • 1.1% fail on Sub-frames
      • 0.56% fail on Attachment bracket and mounting
      • 0.56% fail on Sub-frame mounting prescribed areas
    • 0.56% fail on Springs
      • 0.56% fail on Coil springs
        • 0.56% fail on Coil spring
    • 0.56% fail on Macpherson strut
      • 0.56% fail on Ball joint
  • 9.6% fail on Noise, emissions and leaks
    • 9.0% fail on Exhaust emissions
      • 9.0% fail on Spark ignition
        • 7.3% fail on Catalyst emissions
        • 1.7% fail on Emissions not tested
    • 1.1% fail on Fluid leaks
      • 1.1% fail on Engine oil leaks
  • 8.5% fail on Visibility
    • 4.0% fail on Wipers
    • 3.4% fail on Washers
    • 1.1% fail on Condition of glass (5 times worse than other 1998 cars)
      • 1.1% fail on Windscreen (6 times worse than other 1998 cars)
    • 0.56% fail on View to rear
      • 0.56% fail on Mirrors
  • 6.8% fail on Body, chassis, structure
    • 4.0% fail on Exhaust system
    • 1.7% fail on Body
      • 1.1% fail on Other body component
      • 0.56% fail on Panel
    • 0.56% fail on Integral vehicle structure
      • 0.56% fail on Integral vehicle structure condition
    • 0.56% fail on Chassis
      • 0.56% fail on Chassis condition
    • 0.56% fail on Fuel system
      • 0.56% fail on Fuel cap/sealing device
    • 0.56% fail on Bumpers
    • 0.56% fail on Transmission
      • 0.56% fail on Prop shafts
        • 0.56% fail on Joints
    • 0.56% fail on Engine mounting
      • 0.56% fail on Engine mounting condition
    • 0.56% fail on Load security
      • 0.56% fail on Tailgate
    • 0.56% fail on Floor
    • 0.56% fail on Seats
      • 0.56% fail on Driver's seat
  • 4.5% fail on Seat belts and supplementary restraint systems
    • 4.5% fail on Seat belts
      • 3.4% fail on Prescribed areas
      • 1.1% fail on Condition
  • 3.4% fail on Tyres
    • 2.3% fail on Condition
    • 1.1% fail on Tread depth
  • 2.8% fail on Steering
    • 1.7% fail on Steering linkage components
      • 1.1% fail on Track rod end
      • 0.56% fail on Locking devices
    • 1.1% fail on Steering gear
      • 1.1% fail on Steering rack
    • 0.56% fail on Steering column
  • 0.56% fail on Identification of the vehicle
    • 0.56% fail on Registration plates

Search Good Garages