Rover Metro MOT Results
Registered in 199361.1% pass rate
from 157 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Rover Metro is unusually good or bad.
-
17% fail on
Noise, emissions and leaks
(110% worse than other 1993 cars)
-
16% fail on
Exhaust emissions
(120% worse than other 1993 cars)
-
15% fail on
Spark ignition
(130% worse than other 1993 cars)
- 8.9% fail on Catalyst emissions
- 4.5% fail on Emissions not tested (2 times worse than other 1993 cars)
- 1.9% fail on Non catalyst emissions
-
0.64% fail on
Compression ignition
- 0.64% fail on On or after 01/01/2014
-
15% fail on
Spark ignition
(130% worse than other 1993 cars)
-
1.9% fail on
Fluid leaks
- 1.3% fail on Engine oil leaks
- 0.64% fail on Other leaks
-
16% fail on
Exhaust emissions
(120% worse than other 1993 cars)
-
15% fail on
Brakes
-
15% fail on
Brake performance
(91% worse than other 1993 cars)
-
13% fail on
Service Brake Efficiency (sp)
(3 times worse than other 1993 cars)
-
13% fail on
Rbt (sp)
(3 times worse than other 1993 cars)
- 7.0% fail on Service brake performance (3 times worse than other 1993 cars)
- 5.7% fail on Service brake imbalance (2 times worse than other 1993 cars)
-
13% fail on
Rbt (sp)
(3 times worse than other 1993 cars)
-
4.5% fail on
Service brake performance
-
3.8% fail on
Rbt
- 2.5% fail on Service brake performance
- 1.3% fail on Service brake imbalance
-
0.64% fail on
Plate brake tester
- 0.64% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
-
3.8% fail on
Rbt
-
1.9% fail on
Parking brake efficiency (sp)
- 1.9% fail on Rbt (sp)
-
13% fail on
Service Brake Efficiency (sp)
(3 times worse than other 1993 cars)
-
0.64% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 0.64% fail on Hydraulic brake cylinder
-
15% fail on
Brake performance
(91% worse than other 1993 cars)
-
13% fail on
Lamps, reflectors and electrical equipment
-
3.8% fail on
Headlamps
- 3.8% fail on Headlamp
-
3.8% fail on
Front and rear fog lamps
-
3.8% fail on
Rear fog lamp
- 3.8% fail on Rear fog lamp
-
3.8% fail on
Rear fog lamp
-
3.2% fail on
Headlamp aim
- 3.2% fail on Headlamp aim
-
3.2% fail on
Direction indicators
-
3.2% fail on
Flashing type
- 1.9% fail on Individual direction indicators
- 1.3% fail on Side repeaters
-
3.2% fail on
Flashing type
- 2.5% fail on Stop lamp
-
1.9% fail on
Electrical equipment
- 1.3% fail on Battery(ies)
- 0.64% fail on Horn
-
3.8% fail on
Headlamps
-
13% fail on
Suspension
-
4.5% fail on
Suspension arms
- 3.2% fail on Ball joint (2 times worse than other 1993 cars)
- 1.9% fail on Pins and bushes
- 4.5% fail on Component mounting prescribed areas
-
3.2% fail on
Sub-frames
(4 times worse than other 1993 cars)
- 3.2% fail on Sub-frame mounting prescribed areas (7 times worse than other 1993 cars)
-
2.5% fail on
Air/gas/fluid suspension
(26 times worse than other 1993 cars)
- 1.9% fail on Operation (117 times worse than other 1993 cars)
- 0.64% fail on Suspension unit
- 0.64% fail on Levelling valve
-
0.64% fail on
Other suspension component
- 0.64% fail on Ball joint
-
4.5% fail on
Suspension arms
-
10% fail on
Body, chassis, structure
- 4.5% fail on Exhaust system
-
2.5% fail on
Integral vehicle structure
- 2.5% fail on Integral vehicle structure condition
-
2.5% fail on
Transmission
-
2.5% fail on
Drive shafts
- 2.5% fail on Joints
-
2.5% fail on
Drive shafts
-
1.3% fail on
Chassis
- 1.3% fail on Chassis condition
- 1.3% fail on Floor (6 times worse than other 1993 cars)
- 0.64% fail on Bumpers
-
0.64% fail on
Seats
- 0.64% fail on Driver's seat
-
5.1% fail on
Visibility
- 3.2% fail on Wipers
- 1.9% fail on Washers
-
3.2% fail on
Seat belts and supplementary restraint systems
-
3.2% fail on
Seat belts
- 3.2% fail on Prescribed areas
-
3.2% fail on
Seat belts
-
1.9% fail on
Tyres
- 1.9% fail on Condition
- 0.64% fail on Tread depth
-
0.64% fail on
Identification of the vehicle
- 0.64% fail on Registration plates