Rover 800 MOT Results
Registered in 199653.4% pass rate
from 58 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Rover 800 is unusually good or bad.
-
14% fail on
Lamps, reflectors and electrical equipment
-
5.2% fail on
Headlamp aim
- 5.2% fail on Headlamp aim
-
5.2% fail on
Direction indicators
-
5.2% fail on
Flashing type
- 3.4% fail on Side repeaters
- 1.7% fail on Individual direction indicators
-
5.2% fail on
Flashing type
-
1.7% fail on
Headlamps
- 1.7% fail on Headlamp
- 1.7% fail on Stop lamp
-
1.7% fail on
Electrical equipment
- 1.7% fail on Battery(ies)
-
5.2% fail on
Headlamp aim
-
14% fail on
Suspension
- 8.6% fail on Component mounting prescribed areas
-
3.4% fail on
Suspension arms
- 3.4% fail on Ball joint dust cover
-
1.7% fail on
Springs
-
1.7% fail on
Coil springs
- 1.7% fail on Coil spring
-
1.7% fail on
Coil springs
-
1.7% fail on
Anti-roll bars
- 1.7% fail on Linkage pins and bushes
-
12% fail on
Brakes
-
12% fail on
Brake performance
-
10% fail on
Parking brake efficiency (sp)
(2 times worse than other 1996 cars)
- 10% fail on Rbt (sp) (2 times worse than other 1996 cars)
-
5.2% fail on
Service Brake Efficiency (sp)
-
5.2% fail on
Rbt (sp)
- 3.4% fail on Service brake performance
- 1.7% fail on Service brake imbalance
-
5.2% fail on
Rbt (sp)
-
3.4% fail on
Service brake performance
-
3.4% fail on
Rbt
- 3.4% fail on Service brake performance
-
3.4% fail on
Rbt
-
1.7% fail on
Parking brake performance
-
1.7% fail on
Rbt
- 1.7% fail on Parking brake performance
-
1.7% fail on
Rbt
-
10% fail on
Parking brake efficiency (sp)
(2 times worse than other 1996 cars)
-
1.7% fail on
Mechanical brake components
-
1.7% fail on
Brake linings and pads
- 1.7% fail on Brake pads
-
1.7% fail on
Brake linings and pads
-
12% fail on
Brake performance
-
12% fail on
Body, chassis, structure
-
6.9% fail on
Transmission
-
6.9% fail on
Drive shafts
- 6.9% fail on Joints
-
6.9% fail on
Drive shafts
-
1.7% fail on
Integral vehicle structure
- 1.7% fail on Integral vehicle structure condition
-
1.7% fail on
Chassis
- 1.7% fail on Chassis condition
- 1.7% fail on Exhaust system
-
1.7% fail on
Fuel system
- 1.7% fail on Pipe
-
1.7% fail on
Seats
- 1.7% fail on Driver's seat
-
6.9% fail on
Transmission
-
8.6% fail on
Visibility
- 6.9% fail on Wipers
- 1.7% fail on Washers
-
5.2% fail on
Seat belts and supplementary restraint systems
-
3.4% fail on
Seat belts
- 3.4% fail on Prescribed areas
- 1.7% fail on SRS malfunction indicator lamp
-
3.4% fail on
Seat belts
-
5.2% fail on
Noise, emissions and leaks
-
5.2% fail on
Exhaust emissions
-
5.2% fail on
Spark ignition
- 5.2% fail on Catalyst emissions
-
5.2% fail on
Spark ignition
-
5.2% fail on
Exhaust emissions
-
1.7% fail on
Steering
-
1.7% fail on
Steering gear
- 1.7% fail on Steering rack
-
1.7% fail on
Steering gear
-
1.7% fail on
Speedometer and speed limiter
- 1.7% fail on Speedometer
-
1.7% fail on
Road Wheels
- 1.7% fail on Attachment
-
1.7% fail on
Tyres
- 1.7% fail on Tread depth