Rover 400 MOT Results

Registered in 1993
63.4% pass rate
from 112 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Rover 400 is unusually good or bad.

  • 17% fail on Body, chassis, structure
    • 7.1% fail on Transmission (160% worse than other 1993 cars)
      • 4.5% fail on Drive shafts
        • 4.5% fail on Joints
      • 2.7% fail on Prop shafts (5 times worse than other 1993 cars)
        • 2.7% fail on Joints (9 times worse than other 1993 cars)
    • 6.3% fail on Exhaust system
    • 1.8% fail on Integral vehicle structure
      • 1.8% fail on Integral vehicle structure condition
    • 1.8% fail on Chassis
      • 1.8% fail on Chassis condition
    • 0.89% fail on Doors
      • 0.89% fail on Driver's door
        • 0.89% fail on Door condition
  • 8.9% fail on Noise, emissions and leaks
    • 8.9% fail on Exhaust emissions
      • 8.9% fail on Spark ignition
        • 7.1% fail on Catalyst emissions
        • 1.8% fail on Emissions not tested
    • 0.89% fail on Fluid leaks
      • 0.89% fail on Engine oil leaks
  • 8.0% fail on Lamps, reflectors and electrical equipment
    • 1.8% fail on Headlamps
      • 1.8% fail on Headlamp
    • 1.8% fail on Stop lamp
    • 1.8% fail on Direction indicators
      • 1.8% fail on Flashing type
        • 1.8% fail on Individual direction indicators
    • 1.8% fail on Electrical equipment
      • 1.8% fail on Battery(ies)
      • 0.89% fail on Electrical wiring
    • 0.89% fail on Headlamp aim
      • 0.89% fail on Headlamp aim
  • 7.1% fail on Visibility
    • 4.5% fail on Wipers
    • 0.89% fail on Condition of glass
      • 0.89% fail on Windscreen
    • 0.89% fail on View to rear
      • 0.89% fail on Mirrors
    • 0.89% fail on Washers
  • 7.1% fail on Suspension
    • 4.5% fail on Component mounting prescribed areas
    • 2.7% fail on Suspension arms
      • 2.7% fail on Pins and bushes
    • 1.8% fail on Sub-frames
      • 0.89% fail on Sub-frame
      • 0.89% fail on Sub-frame mounting prescribed areas
    • 0.89% fail on Anti-roll bars
      • 0.89% fail on Linkage pins and bushes
  • 6.3% fail on Brakes
    • 3.6% fail on Brake performance
      • 2.7% fail on Service brake performance
        • 2.7% fail on Rbt
          • 2.7% fail on Service brake performance
      • 2.7% fail on Service Brake Efficiency (sp)
        • 2.7% fail on Rbt (sp)
          • 2.7% fail on Service brake performance
          • 0.89% fail on Service brake imbalance
      • 1.8% fail on Parking brake efficiency (sp)
        • 1.8% fail on Rbt (sp)
    • 0.89% fail on Rigid brake pipes
    • 0.89% fail on Flexible brake hoses
    • 0.89% fail on Mechanical brake components
      • 0.89% fail on Brake linings and pads
        • 0.89% fail on Brake pads
  • 4.5% fail on Seat belts and supplementary restraint systems
    • 4.5% fail on Seat belts
      • 4.5% fail on Prescribed areas
  • 4.5% fail on Tyres
    • 3.6% fail on Tread depth
    • 0.89% fail on Condition
  • 1.8% fail on Steering
    • 0.89% fail on Steering linkage components
      • 0.89% fail on Ball joint
      • 0.89% fail on Track rod end
    • 0.89% fail on Power steering
      • 0.89% fail on Operation
  • 0.89% fail on Identification of the vehicle
    • 0.89% fail on Registration plates

Search Good Garages