Rover 200 MOT Results

Registered in 2000
55.2% pass rate
from 58 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Rover 200 is unusually good or bad.

  • 16% fail on Lamps, reflectors and electrical equipment
    • 5.2% fail on Stop lamp
    • 5.2% fail on Direction indicators
      • 5.2% fail on Flashing type
        • 3.4% fail on Individual direction indicators
        • 1.7% fail on Side repeaters
    • 3.4% fail on Electrical equipment
      • 1.7% fail on Battery(ies)
      • 1.7% fail on Horn
    • 1.7% fail on Headlamps
      • 1.7% fail on Headlamp
    • 1.7% fail on Position lamps
      • 1.7% fail on Position lamp
    • 1.7% fail on Registration plate lamp(s)
  • 12% fail on Brakes
    • 8.6% fail on Brake performance
      • 6.9% fail on Service brake performance
        • 6.9% fail on Rbt
          • 6.9% fail on Service brake performance
      • 3.4% fail on Service Brake Efficiency (sp)
        • 3.4% fail on Rbt (sp)
          • 3.4% fail on Service brake imbalance
          • 1.7% fail on Service brake performance
      • 3.4% fail on Parking brake performance
        • 3.4% fail on Rbt
          • 3.4% fail on Parking brake performance
      • 3.4% fail on Parking brake efficiency (sp)
        • 3.4% fail on Rbt (sp)
    • 3.4% fail on Rigid brake pipes
    • 1.7% fail on Parking brake control
      • 1.7% fail on Lever
    • 1.7% fail on Mechanical brake components
      • 1.7% fail on Brake discs and drums
        • 1.7% fail on Brake drums
  • 12% fail on Noise, emissions and leaks
    • 12% fail on Exhaust emissions
      • 12% fail on Spark ignition
        • 8.6% fail on Catalyst emissions
        • 1.7% fail on Non catalyst emissions
        • 1.7% fail on Emissions not tested
  • 10% fail on Suspension
    • 8.6% fail on Component mounting prescribed areas
    • 1.7% fail on Springs
      • 1.7% fail on Spring mounting prescribed areas
    • 1.7% fail on Suspension arms
      • 1.7% fail on Pins and bushes
    • 1.7% fail on Suspension rods
      • 1.7% fail on Ball joint dust cover
    • 1.7% fail on Anti-roll bars
      • 1.7% fail on Linkage
  • 10% fail on Body, chassis, structure
    • 5.2% fail on Transmission
      • 5.2% fail on Drive shafts
        • 5.2% fail on Joints
    • 1.7% fail on Integral vehicle structure
      • 1.7% fail on Integral vehicle structure condition
    • 1.7% fail on Chassis
      • 1.7% fail on Chassis condition
    • 1.7% fail on Engine mounting
      • 1.7% fail on Engine mounting condition
  • 5.2% fail on Seat belts and supplementary restraint systems
    • 5.2% fail on Seat belts
      • 5.2% fail on Prescribed areas
  • 1.7% fail on Identification of the vehicle
    • 1.7% fail on Registration plates
  • 1.7% fail on Steering
    • 1.7% fail on Power steering
      • 1.7% fail on Pipes and hoses
  • 1.7% fail on Visibility
    • 1.7% fail on Wipers
  • 1.7% fail on Tyres
    • 1.7% fail on Condition

Search Good Garages