Rover 200 MOT Results

Registered in 1990
58.9% pass rate
from 73 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Rover 200 is unusually good or bad.

  • 16% fail on Suspension
    • 9.6% fail on Component mounting prescribed areas
    • 2.7% fail on Suspension arms
      • 2.7% fail on Ball joint
      • 1.4% fail on Pins and bushes
    • 2.7% fail on Anti-roll bars
      • 2.7% fail on Linkage pins and bushes (6 times worse than other 1990 cars)
    • 1.4% fail on Shock absorbers
    • 1.4% fail on Sub-frames
      • 1.4% fail on Sub-frame
    • 1.4% fail on Other suspension component
      • 1.4% fail on Pins and bushes
  • 16% fail on Body, chassis, structure
    • 6.8% fail on Exhaust system
    • 5.5% fail on Transmission
      • 5.5% fail on Drive shafts
        • 5.5% fail on Joints
    • 2.7% fail on Chassis
      • 2.7% fail on Chassis condition
    • 1.4% fail on Integral vehicle structure
      • 1.4% fail on Integral vehicle structure condition
    • 1.4% fail on Doors
      • 1.4% fail on Other passenger's door
        • 1.4% fail on Door condition
    • 1.4% fail on Boot lid
      • 1.4% fail on Boot lid condition
  • 15% fail on Lamps, reflectors and electrical equipment
    • 8.2% fail on Stop lamp (2 times worse than other 1990 cars)
    • 2.7% fail on Front and rear fog lamps
      • 2.7% fail on Rear fog lamp
        • 2.7% fail on Rear fog lamp
    • 1.4% fail on Headlamps
      • 1.4% fail on Headlamp
    • 1.4% fail on Headlamp aim
      • 1.4% fail on Headlamp aim
    • 1.4% fail on Position lamps
      • 1.4% fail on Position lamp
    • 1.4% fail on Direction indicators
      • 1.4% fail on Flashing type
        • 1.4% fail on Side repeaters
    • 1.4% fail on Mandatory tell-tales
      • 1.4% fail on Rear fog lamp tell-tale
  • 9.6% fail on Brakes
    • 6.8% fail on Brake performance
      • 4.1% fail on Service brake performance
        • 4.1% fail on Rbt
          • 4.1% fail on Service brake performance
      • 2.7% fail on Service Brake Efficiency (sp)
        • 2.7% fail on Rbt (sp)
          • 2.7% fail on Service brake performance
      • 2.7% fail on Parking brake efficiency (sp)
        • 2.7% fail on Rbt (sp)
      • 1.4% fail on Parking brake performance
        • 1.4% fail on Rbt
          • 1.4% fail on Parking brake performance
    • 1.4% fail on Rigid brake pipes
    • 1.4% fail on Mechanical brake components
      • 1.4% fail on Brake linings and pads
        • 1.4% fail on Brake pads
  • 8.2% fail on Noise, emissions and leaks
    • 8.2% fail on Exhaust emissions
      • 8.2% fail on Spark ignition
        • 6.8% fail on Non catalyst emissions
        • 1.4% fail on Catalyst emissions
  • 5.5% fail on Visibility
    • 5.5% fail on Washers
  • 4.1% fail on Identification of the vehicle (3 times worse than other 1990 cars)
    • 4.1% fail on Registration plates (3 times worse than other 1990 cars)
  • 4.1% fail on Seat belts and supplementary restraint systems
    • 4.1% fail on Seat belts
      • 4.1% fail on Prescribed areas
  • 2.7% fail on Steering
    • 1.4% fail on Steering gear
      • 1.4% fail on Steering rack
    • 1.4% fail on Power steering
      • 1.4% fail on Other components
  • 1.4% fail on Tyres
    • 1.4% fail on Tread depth

Search Good Garages