MOT Results

Honest John Good Garage Guide MOT Results » Proton » Jumbuck » 2006

Proton Jumbuck MOT Results

Registered in 2006
55.5% pass rate
from 265 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2006 cars and highlighted areas where the Proton Jumbuck is unusually good or bad.

  • 16% fail on Lamps, reflectors and electrical equipment
    • 5.3% fail on Front and rear fog lamps (4 times worse than other 2006 cars)
      • 5.3% fail on Rear fog lamp (4 times worse than other 2006 cars)
        • 5.3% fail on Rear fog lamp (4 times worse than other 2006 cars)
    • 4.5% fail on Headlamp aim
      • 4.2% fail on Headlamp aim
      • 0.38% fail on Headlamp aim not tested
    • 3.0% fail on Stop lamp
    • 2.6% fail on Electrical equipment (3 times worse than other 2006 cars)
      • 1.5% fail on Horn (4 times worse than other 2006 cars)
      • 1.1% fail on Battery(ies)
    • 1.9% fail on Headlamps
      • 1.9% fail on Headlamp
    • 1.5% fail on Direction indicators
      • 1.5% fail on Flashing type
        • 1.1% fail on Individual direction indicators
        • 1.1% fail on Side repeaters
    • 1.1% fail on Registration plate lamp(s)
    • 1.1% fail on Mandatory tell-tales (29 times worse than other 2006 cars)
      • 1.1% fail on Rear fog lamp tell-tale (36 times worse than other 2006 cars)
      • 0.38% fail on Main beam tell-tale
    • 0.38% fail on Position lamps
      • 0.38% fail on Position lamp
  • 13% fail on Suspension
    • 7.9% fail on Component mounting prescribed areas (4 times worse than other 2006 cars)
    • 2.6% fail on Anti-roll bars
      • 1.9% fail on Linkage pins and bushes (8 times worse than other 2006 cars)
      • 0.38% fail on Pins and bushes
      • 0.38% fail on Linkage ball joints
    • 1.5% fail on Wheel bearings
    • 1.1% fail on Suspension arms (79% better than other 2006 cars)
      • 0.75% fail on Suspension arm
      • 0.38% fail on Attachment bracket and mounting
    • 0.75% fail on Shock absorbers
    • 0.38% fail on Sub-frames
      • 0.38% fail on Sub-frame mounting prescribed areas
  • 12% fail on Noise, emissions and leaks (99% worse than other 2006 cars)
    • 12% fail on Exhaust emissions (100% worse than other 2006 cars)
      • 12% fail on Spark ignition (160% worse than other 2006 cars)
        • 6.0% fail on Catalyst emissions (190% worse than other 2006 cars)
        • 5.3% fail on Malfunction indicator lamp (130% worse than other 2006 cars)
        • 1.9% fail on Emissions not tested
        • 1.5% fail on Emission control equipment (35 times worse than other 2006 cars)
          • 0.75% fail on Catalytic converter (26 times worse than other 2006 cars)
          • 0.75% fail on Oxygen sensor (92 times worse than other 2006 cars)
      • 0.75% fail on Compression ignition
        • 0.38% fail on Pre 01/07/2008 Non turbo
        • 0.38% fail on Malfunction indicator lamp
    • 0.38% fail on Fluid leaks
      • 0.38% fail on Hydraulic fluid leaks
  • 12% fail on Brakes
    • 7.5% fail on Rigid brake pipes (200% worse than other 2006 cars)
    • 6.8% fail on Brake performance
      • 5.3% fail on Service Brake Efficiency (sp) (5 times worse than other 2006 cars)
        • 5.3% fail on Rbt (sp) (5 times worse than other 2006 cars)
          • 5.3% fail on Service brake imbalance (7 times worse than other 2006 cars)
          • 0.38% fail on Service brake performance
      • 2.3% fail on Service brake performance
        • 2.3% fail on Rbt
          • 2.3% fail on Service brake performance
          • 0.38% fail on Service brake imbalance
      • 1.1% fail on Parking brake efficiency (sp)
        • 1.1% fail on Rbt (sp)
      • 0.75% fail on Brake performance not tested
      • 0.75% fail on Parking brake performance
        • 0.75% fail on Rbt
          • 0.75% fail on Parking brake performance
    • 0.38% fail on Service brake pedal or hand lever
      • 0.38% fail on Pedal
    • 0.38% fail on Parking brake control
      • 0.38% fail on Lever
    • 0.38% fail on Hydraulic systems
      • 0.38% fail on Reservoirs
    • 0.38% fail on Flexible brake hoses
    • 0.38% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.38% fail on Hydraulic brake cylinder
  • 12% fail on Body, chassis, structure
    • 4.9% fail on Transmission
      • 4.9% fail on Drive shafts
        • 4.9% fail on Joints
    • 2.6% fail on Integral vehicle structure (4 times worse than other 2006 cars)
      • 2.6% fail on Integral vehicle structure condition (4 times worse than other 2006 cars)
    • 2.6% fail on Exhaust system
    • 1.9% fail on Chassis (5 times worse than other 2006 cars)
      • 1.9% fail on Chassis condition (6 times worse than other 2006 cars)
    • 1.5% fail on Fuel system
      • 0.75% fail on Pipe (13 times worse than other 2006 cars)
      • 0.38% fail on Tank
      • 0.38% fail on Fuel cap/sealing device
    • 0.38% fail on Body
      • 0.38% fail on Other body component
    • 0.38% fail on Doors
      • 0.38% fail on Front passenger's door
        • 0.38% fail on Door condition
    • 0.38% fail on Floor
  • 8.3% fail on Visibility
    • 5.7% fail on Wipers
    • 2.3% fail on Washers
    • 0.75% fail on Condition of glass
      • 0.75% fail on Windscreen
  • 6.0% fail on Seat belts and supplementary restraint systems (150% worse than other 2006 cars)
    • 6.0% fail on Seat belts (4 times worse than other 2006 cars)
      • 6.0% fail on Prescribed areas (9 times worse than other 2006 cars)
  • 4.2% fail on Steering
    • 3.4% fail on Steering linkage components
      • 3.4% fail on Track rod end
    • 0.75% fail on Steering gear
      • 0.75% fail on Steering rack
    • 0.38% fail on Prescribed areas
  • 3.4% fail on Tyres
    • 1.9% fail on Tread depth
    • 1.1% fail on Condition
    • 0.75% fail on Size/type
  • 0.38% fail on Identification of the vehicle
    • 0.38% fail on Registration plates

Search Good Garages