Porsche 944 MOT Results
Registered in 198972.0% pass rate
from 497 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 cars and highlighted areas where the Porsche 944 is unusually good or bad.
-
12% fail on
Lamps, reflectors and electrical equipment
-
4.0% fail on
Front and rear fog lamps
-
4.0% fail on
Rear fog lamp
- 4.0% fail on Rear fog lamp
-
4.0% fail on
Rear fog lamp
-
3.0% fail on
Headlamp aim
- 3.0% fail on Headlamp aim
-
3.0% fail on
Direction indicators
-
3.0% fail on
Flashing type
- 1.4% fail on Side repeaters
- 1.2% fail on All direction indicators
- 0.40% fail on Individual direction indicators
- 0.20% fail on Switch
-
3.0% fail on
Flashing type
-
1.8% fail on
Headlamps
- 1.8% fail on Headlamp
- 0.20% fail on Dipswitch
- 1.2% fail on Registration plate lamp(s)
-
0.80% fail on
Electrical equipment
- 0.40% fail on Horn
- 0.20% fail on Electrical wiring
- 0.20% fail on Battery(ies)
- 0.60% fail on Stop lamp (74% better than other 1989 cars)
-
0.40% fail on
Mandatory tell-tales
- 0.40% fail on Rear fog lamp tell-tale
-
0.20% fail on
Hazard warning
- 0.20% fail on Switch
-
4.0% fail on
Front and rear fog lamps
-
9.9% fail on
Brakes
-
8.0% fail on
Brake performance
-
3.6% fail on
Service brake performance
-
3.6% fail on
Rbt
- 3.4% fail on Service brake performance
- 0.20% fail on Service brake imbalance
-
3.6% fail on
Rbt
-
3.6% fail on
Parking brake efficiency (sp)
- 3.6% fail on Rbt (sp)
-
2.8% fail on
Service Brake Efficiency (sp)
-
2.8% fail on
Rbt (sp)
- 2.4% fail on Service brake performance
- 0.80% fail on Service brake imbalance
-
2.8% fail on
Rbt (sp)
-
1.0% fail on
Parking brake performance
-
0.80% fail on
Rbt
- 0.80% fail on Parking brake performance
-
0.20% fail on
Plate brake tester
- 0.20% fail on Parking brake performance
-
0.80% fail on
Rbt
- 0.40% fail on Brake performance not tested
-
3.6% fail on
Service brake performance
- 2.2% fail on Rigid brake pipes
-
0.60% fail on
ABS / EBS / ESC
- 0.60% fail on Anti-lock braking system
- 0.40% fail on Flexible brake hoses
-
0.20% fail on
Mechanical brake components
-
0.20% fail on
Brake cables, rods, levers and linkages
- 0.20% fail on Cable
-
0.20% fail on
Brake cables, rods, levers and linkages
-
8.0% fail on
Brake performance
-
7.2% fail on
Noise, emissions and leaks
-
6.8% fail on
Exhaust emissions
-
6.8% fail on
Spark ignition
- 5.0% fail on Non catalyst emissions
- 1.4% fail on Catalyst emissions (180% worse than other 1989 cars)
- 0.40% fail on Emissions not tested
-
6.8% fail on
Spark ignition
-
0.40% fail on
Fluid leaks
- 0.20% fail on Engine oil leaks
- 0.20% fail on Hydraulic fluid leaks
-
6.8% fail on
Exhaust emissions
-
6.0% fail on
Suspension
-
2.4% fail on
Suspension arms
- 1.2% fail on Ball joint
- 1.0% fail on Ball joint dust cover
- 0.20% fail on Suspension arm
- 0.20% fail on Attachment bracket and mounting
- 2.4% fail on Component mounting prescribed areas
-
1.6% fail on
Anti-roll bars
- 0.40% fail on Attachment bracket and mounting
- 0.40% fail on Linkage pins and bushes
- 0.40% fail on Linkage attachment bracket and mounting (13 times worse than other 1989 cars)
- 0.20% fail on Pins and bushes
- 0.20% fail on Linkage
- 0.60% fail on Wheel bearings
-
0.40% fail on
Macpherson strut
- 0.40% fail on Pins and bushes (6 times worse than other 1989 cars)
-
0.20% fail on
Sub-frames
- 0.20% fail on Sub-frame
-
0.20% fail on
Other suspension component
- 0.20% fail on Ball joint
- 0.20% fail on Ball joint dust cover
-
2.4% fail on
Suspension arms
-
4.8% fail on
Body, chassis, structure
(41% better than other 1989 cars)
-
1.2% fail on
Integral vehicle structure
- 1.2% fail on Integral vehicle structure condition
-
1.0% fail on
Fuel system
- 0.80% fail on Pipe
- 0.20% fail on Hose
-
1.0% fail on
Transmission
-
1.0% fail on
Drive shafts
- 0.80% fail on Joints
- 0.20% fail on Drive shaft
-
1.0% fail on
Drive shafts
-
0.80% fail on
Chassis
- 0.80% fail on Chassis condition
- 0.60% fail on Exhaust system (76% better than other 1989 cars)
-
0.40% fail on
Boot lid
(8 times worse than other 1989 cars)
- 0.40% fail on Boot lid condition (9 times worse than other 1989 cars)
-
0.20% fail on
Doors
-
0.20% fail on
Front passenger's door
- 0.20% fail on Door condition
-
0.20% fail on
Front passenger's door
- 0.20% fail on Floor
-
0.20% fail on
Seats
- 0.20% fail on Passenger's seat
-
1.2% fail on
Integral vehicle structure
-
4.4% fail on
Visibility
- 3.4% fail on Washers
- 1.8% fail on Wipers
-
0.20% fail on
View to rear
- 0.20% fail on Mirrors
-
1.2% fail on
Seat belts and supplementary restraint systems
-
1.2% fail on
Seat belts
- 0.80% fail on Prescribed areas
- 0.20% fail on Requirements
- 0.20% fail on Condition
-
1.2% fail on
Seat belts
-
1.0% fail on
Steering
(73% better than other 1989 cars)
-
0.80% fail on
Power steering
- 0.40% fail on Operation
- 0.20% fail on Pipes and hoses
- 0.20% fail on Other components
-
0.20% fail on
Steering gear
- 0.20% fail on Steering rack
-
0.80% fail on
Power steering
-
1.0% fail on
Tyres
- 0.60% fail on Tread depth
- 0.40% fail on Condition
-
0.60% fail on
Identification of the vehicle
- 0.60% fail on Registration plates
-
0.20% fail on
Speedometer and speed limiter
- 0.20% fail on Speedometer
-
0.20% fail on
Road Wheels
- 0.20% fail on Attachment